
FM - 43
STEP #2 - Turn chair on other side and repeat
step one.
STEP #4 - Fasten the swivel mechanism to the springs with
an aluminum plate on top of the springs. Please
note: Only hand tighten the Flange Nuts until
all six bolts are installed, then fully tighten.
STEP #5 - Lift the chair assembly onto the base and place
the stem of the swivel mechanism into the
receiver of the base. Push rmly on the chair
until it sits securely in the receiver.
Your Swivel Rocker Dining Chair is complete!
¼" x 3½" Carriage Bolts ¼" x 3½" Carriage Bolts
¼" x 3½" Carriage Bolts
¼" x 3½" Carriage Bolts
¼" x 2¼" Carriage Bolts ¼" x 2¼" Carriage Bolts
⁄" x 1¼" Machine Bolt
Swivel Mechanism
Aluminum PlateFiberglass Springs
STEP #3 -
Fasten the 3- berglass springs and aluminum
plates to the frame with the springs pointing
towards the front of the chair. Please note:
Only hand tighten the Flange Nuts until all
six bolts are installed, then fully tighten.
Lock
Washer
Square
Nut
STEP #1 - A. Attach the seat to the
back using 1- ¼" x 3½"
Carriage Bolt and Flange
Nuts.
B. Attach the arm
assembly to the Seat
and Back using 2- ¼" x
3½" and 1- ¼" x 2¼"
Carriage Bolts and Flange
Nuts.
A.
A.
B.
B.
B.
⁄" x 1¼" Machine Bolt
Fiberglass Springs
Aluminum Frame
Aluminum Plate
¼" Flange Nut