Outsunny Hammerfest 4 Protect User manual

Hammerfest 4 Protect
1
2
3
4
A20-125 EN C000000

Before you go on holiday with the new tent, please do
a test set-up.
ASSEMBLY INSTRUCTIONS
Please follow these instructions point by point in the gi-
ven order.
· Poles and components: Remove all contents from
tent bag.
· Extend all tent poles carefully. Do not let the shock
cords snap the poles together.
·
RAIN FLY
· Each tent pole is colour coded to match a corre-
sponding tent pole sleeve to aid in assembling the
tent
·
end to the other
· At the end of each tent pole, insert the metal pins
both ends of each tent pole
·
be secured by anchoring down with steel stakes at
·
and buckles on the PP webbings joining both sides
INNER TENTS
·
its appropriate location
· Starting from the rear of the inner tent, stake down
·
starting from the bottom rear and work your way
forward to the top using the toggles on the outer
wall of the inner tent and loops running along the
· Repeat the above steps for the rest of the inner tents
- you can leave some of the inner tents out to incre-
ase the living or storage capacity and to reduce the
travel weight of the whole tent.
CARE
· When packing the tent make sure that it is com-
pletely dry, otherwise there is a danger of mildew
and rotting.
· Always pack poles and tent pegs separately from
inner and outer tent.
· Prior to folding, clean the basement of the inner
tent.
· Use a soft sponge and clear water only to clean the
outer tent canvas. Don‘t use any cleaning agent, for
they may be harmful to the impregnation.
· Never pull tent pegs out by means of rings or ten-
sioning ropes.
UK
0044-800-240-4004
[e-mail]