Ozito PLS-1214 User manual

PLUNGE
SAW KIT
1200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 1200W
Input: 230-240V ~ 50Hz
No Load Speed: 5,200/min
Blade Diameter: 165mm (6½”)
Blade Bore: 20mm
Depth of Cut: 55mm @ 90°
42mm @ 45°
Guide Rail Length: 700mm
Weight: 4.65kg
PLS-1214
WHAT’S IN THE BOX
Plunge Saw
Clamps x 2
Guide Rails x 2
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0117
Hex Keys (3 & 5mm) &
Joiner
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: O-rings, bearing,
seals gaskets.
WARNING
The following actions will result in the warranty being void.
• Ifthetoolhasbeenoperatedonasupplyvoltageother
than that specified on the tool.
• Ifthetoolshowssignsofdamageordefectscaused
by or resulting from abuse, accidents or alterations.
• Failuretoperformmaintenanceassetoutwithinthe
instruction manual.
• Ifthetoolisdisassembledortamperedwithinanyway.
• Professional,industrialorhighfrequencyuse.

ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. DEPTH & BEVEL ADJUSTMENT
1. Hex Key Holder
2. Dust Port
3. Safety Switch
4. On/Off Trigger
5. Blade Change Lever
6. Front Handle
7. Rear Bevel Locking Knob
8. Saw Blade
9. Front Bevel Locking Knob
10.Cutting Line Guide
PLUNGE SAW
1 2 3 4 5 6
7 8 9 10
11 12 13 15 16 1714
B
A
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Cutting Depth Adjustment
Bevel Adjustment
¥Cutting depth Ashows the cutting depth WITHOUT Guide
rail tted.
¥Cutting depth Bshows the cutting depth WITH guide rail
tted.
1. Loosen the Cutting Depth
Knob.
1. Loosen both Bevel Locking
Knobs.
3. Tighten Bevel Locking
Knobs.
2. Press the Knob inwards and slide to set the desired depth
using the Cutting Depth Scale.
2. Align Base Plate to desired
angle on Bevel Angle Scale.
Depth should be adjusted so that no more than one tooth
is protruding through the timber. This helps to minimise
splintering.
11. Cutting Depth Scale
12.Bevel Angle Scale
13.Cutting Depth Knob
14.Base Plate
15.Blade Locking Lever
16.Guide Rail Adjusting Knob
17.Rear Handle
3. Tighten Cutting Depth Knob.
B
A

2. CONTROLS 3. CUTTING GUIDES
The cutting guide will give an approximate line of cut. For a
straight cut, use the 0° notch. For a 45° cut, use the 45° notch.
OPERATION
WARNING! THE TOOL IS RECOMMENDED FOR USE WITH
A RESIDUAL CURRENT DEVICE WITH A RATED RESIDUAL
CURRENT OF 30mA OR LESS.
WARNING! AFTER USE, HOLD THE SAW AWAY FROM
YOUR BODY UNTIL THE BLADE STOPS COMPLETELY.
B
A
0
10
20
30
40
50
Turning On and Off
Cutting Line Guide
Using the Guide Rail
Note: Allow the saw to reach full speed before beginning a cut.
1. Slide and hold the Safety Switch then squeeze the On/Off
Trigger to start the saw.
2. Slide on the second Guide Rail fully into position and tighten
in place.
1. To connect two rails, slide the Joiner into the notch on the
underside of one Guide Rail then tighten the screws with the
small (3mm) Hex Key provided.
2. To stop the saw, release
the On/Off Trigger.
0º
45º
B
A
0
10
20
30
40
50
Note:Additional Guide Rails may be assembled if required by
following the above steps.
3. Place the
Plunge Saw in
the Guide Rail.
Note: In conned spaces using one 700mm guide rail is ideal.
Guide Rail Adjustment
Tighten or loosen the Adjusting knobs to minimise or increase
the clearence between the plunge saw and the guide rail.
B
A
0
10
20
30
40
50

PLS-1214
4. SAWING WITH THE GUIDE RAIL 5. BLADE FITMENT
B
A
0
10
20
30
40
50
B, 25mm e.g.
B
A
0
10
20
30
40
50
B, 25mm e.g.
B
A
0
10
20
30
40
50
B, 25mm e.g.
B
A
0
10
20
30
40
50
B, 25mm e.g.
2. Place a Clamp at either end
of the Guide Rail and clamp
the material to be cut.
5. Hold the saw securely with
both hands and start the
tool.
1. Place the Guide Rail onto
the material to be cut.
The Guide Rail is used to carry out straight cuts.
The rubber lip (black rubber lip) on the guide rail acts as a
splinter guard; it prevents fraying of the surface while sawing
wooden materials. For this, the teeth of the saw blade must
face directly against the rubber lip.
Note: On the very rst cut, the rubber lip will be adapted with
the guide rail to the plunge saw.
6. Press the saw downwards
to reach the sawing depth
set at step 3.
1. Lift the Blade Change Lever.
5. Remove and replace
blade. Ensure arrows
on the blade point in the
same direction as the
arrow on the blade guard.
7. Set the plunge saw to its original position.
3. Press and hold the Blade
Locking Lever.
2. Press and hold the Safety
Switch and push the saw
downwards until the Blade
Bolt is visible. The motor
will lock into place.
6. Fit outer Blade Flange and
Blade Bolt. Depress Blade
Locking Lever and tighten
blade bolt.
The tool is recommended for wood cutting only and is not
recommended for use with abrasive wheels or masonry/
diamond cutting wheels. Only use 165mm wood cutting blades.
7. Move the saw
through the
material to
perform the cut.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
IMPORTANT! ALWAYS WEAR GLOVES WHEN HANDLING SAW
BLADES, RISK OF INJURY.
4. Use the large (5mm) Hex
Key to undo the Blade Bolt,
turning anti-clockwise.
3. Ensure the cutting depth
is set and locked to the
desired depth.
4. Place the Plunge Saw in
the guide Rail.
B
A
0
10
20
30
40
50
B
A
8. Once complete, release the on/off trigger and move the saw
blade upwards.

MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landll and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
• Keep the vents of the saw clean at all times. If possible, prevent foreign matter
from entering the vents.
• After each use, blow air through the saw housing and guard, to ensure it is
free from all dust particles which may build up. Build up of dust particles may
cause the saw to overheat and fail.
• If the enclosure of the saw requires cleaning, do not use solvents but a moist
soft cloth only. Never let any liquid get inside the saw; never immerse any part
of the saw into a liquid.
• The grease in the gearbox will require replenishment after extensive use of the
saw. Please see a power tool repairer to provide this service.
Carbon Brushes
When the carbon brushes wear out, the saw will
spark and/or stop. Discontinue use as soon as
this happens. They should be replaced prior to
recommencing use of the saw. Carbon brushes
are a wearing component of the saw therefore not
covered under warranty. Continuing to use the saw
when carbon brushes need to be replaced may cause
permanent damage to the saw. Carbon brushes
will wear out after many uses. When the carbon brushes need to be replaced,
take the saw to an electrician or a power tool repairer for a quick and low cost
replacement. Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the saw by an unauthorised person or by mishandling
of the saw.
Circular Saw Tips
Always hold the soft grip handle with one hand and the front handle with the other.
Maintain a rm grip and operate the on/off switch with a positive action.
Never force the saw. Use light and continuous pressure.
Allow the saw to reach full speed before beginning a cut.
When cutting is interrupted, to resume cutting, depress the lock-off button and
squeeze the on/off switch and allow the blade to reach full speed, re-enter the cut
slowly and resume cutting.
When cutting across the grain, the bres of the wood have a tendency to tear and
lift. Advancing the saw slowly minimizes this effect. For a nished cut, a cross cut
blade or mitre blade is recommended.
Sparking visible through the housing air vents
A small amount of sparking may be visible through the housing vents.
This is normal and does not indicate a problem.
Excessive sparking visible through the housing air vents
and/or the saw failing to operate
May indicate the carbon brushes have worn out and need to be
replaced. Carbon brushes should only be replaced by a qualied
electrician or power tool repairer.
BLADES: You will nd a selection of blades available from the Tool
Shop at Bunnings Warehouse.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
VVolts Hz
~Alternating current W
/min Revolutions or
reciprocation per minute
Regulator compliance mark
no
Warning Wear hearing protection
Read instruction manual
5124
Wear eye protectionWear a breathing mask
Important. Risk of injury! Do not reach into the running saw blade
Hertz
Watts
No load speed

WARNING!
a) Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle, or
motor housing. If both hands are holding the saw, they cannot be cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot protect you from the blade below the
workpiece.
c) Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable
platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of
control.
e) Hold power tool by insulated gripping surfaces when performing an operation where the cutting
tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal
parts of the power tool “live” and shock the operator.
f) When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and
reduces the chance of blade binding.
g) Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.
h) Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were specially
designed for your saw, for optimum performance and safety of operation.
Further safety instructions for all saws
Causes and operator prevention of kickback:
• Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw
to lift up and out of the workpiece toward the operator;
• When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor
reaction drives the unit rapidly back toward the operator;
• If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into
the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.
Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided
by taking proper precautions as given below.
a) Maintain a rm grip with both hands on the saw and position your arms to resist kickback forces.
Position your body to either side of the blade, but not in line with the blade. Kickback could cause the
saw to jump backwards, but kickback forces can be controlled by the operator, if proper precautions are
taken.
b) When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the
saw motionless in the material until the blade comes to a complete stop. Never attempt to remove
the saw from the work or pull the saw backward while the blade is in motion or kickback may occur.
Investigate and take corrective actions to eliminate the cause of blade binding.
c) When restarting a saw in the workpiece, centre the saw blade in the kerf and check that saw teeth
are not engaged into the material. If saw blade is binding, it may walk up or kickback from the workpiece
as the saw is restarted.
d) Support large panels to minimise the risk of blade pinching and kickback. Large panels tend to sag
under their own weight. Supports must be placed under the panel on both sides, near the line of cut and
near the edge of the panel.
e) Do not use dull or damaged blades. Blunt or improperly set blades produce narrow kerf causing
excessive friction, blade binding and kickback.
f) Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If
blade adjustment shifts while cutting, it may cause binding and kickback.
g) Use extra caution when making a “plunge cut” into existing walls or other blind areas. The
protruding blade may cut objects that can cause kickback.
h) Check guard for proper closing before each use. Do not operate the saw if guard does not
move freely and close instantly. Never clamp or tie the guard so that the blade exposed. If saw is
accidentally dropped, guard may be bent. Check to make sure that guard moves freely and does not touch
the blade or any other part, in all angles and depths of cut.
i) Check the operation and condition of the guard return spring. If the guard and the spring are not
operating properly, they must be serviced before use. Guard may operate sluggishly due to damaged
parts, gummy deposits, or a build-up of debris.
j) Assure that the base plate of the saw will not shift while performing the “plunge cut” when the blade bevel
setting is not at 90 degree, Blade shifting sideways will cause binding and likely kick back.
k)Always observe that the guard is covering the blade before placing saw down on bench or oor.
An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be
aware of the time it takes for the blade to stop after switch is released.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Recommendations for the use of a residual current device with a rated residual current of 30mA or
less.
Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable
platform. It is important to support the work properly to minimize body exposure, blade binding, or
loss of control.
Do not use the tool with abrasive or masonry/wet diamond wheels.
Only use blade diameter(s) in accordance with the markings on the tool.
PLUNGE SAW SAFETY WARNINGS
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of re, electric shock, personal injury
and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before
operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the power supply
corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
This tool is double insulated; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid
a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The
insulation system is for added protection against injury resulting from a possible electrical insulation failure
within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not
suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric
shock.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power
tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your
nger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY