Ozito HTE-555 User manual

HEDGE
TRIMMER
550W 455mm
INSTRUCTION MANUAL
SPECIFICATIONS
HTE-555
STANDARD EQUIPMENT
Hedge Trimmer
Blade Cover
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon brushes,
blade cover.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1018
Input: 230-240V ~ 50Hz
Motor: 550W
No Load Speed: 1,700/min
Blade Length: 510mm
Cutting Length Max.: 455mm
Cutting Capacity Max.:Ø13mm
Weight: 2.6kg

ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Slide the blade cover off
the blade.
The hedge trimmer comes with a blade cover to protect the
blades when storing. The blade cover must be removed prior to
operation.
2. Tot,slidethecoverback
over the blade.
1. Rear Handle
2. Power Cord
3. Cord Retainer
4. On/Off Switch
5. Safety Switch
6. Front Handle
7. Safety Guard
8. Cutting Blade
HEDGE TRIMMER
ACCESSORIES
KNOW YOUR PRODUCT
1 2 3 4 5 6 8
9
7
1. ASSEMBLY
PREPARATION
Fitting and Removing the Blade Cover
WARNING!: ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
REMOVING COVER AND PREPARING FOR USE.
WARNING!: NEVER USE THE HEDGE TRIMMER WITH THE
BLADE COVER FITTED.
WARNING!: WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NONSLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED OR
CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT WITH THE
POWER SUPPLY CONNECTED.
Safety Guard
Ensure the safety guard
isttedsecurelyontothe
hedge trimmer before use.
Tighten the screws on either
side if necessary.
WARNING!: NEVER USE THE HEDGE TRIMMER UNLESS
THE SAFETY GUARD IS FITTED.
9. Blade Cover

1. Make a loop with the
extension cord and push it
through the hole under the
on/off switch.
3. Connect the extension cord socket to the hedge trimmer
power cord.
2. Place the loop onto the
cord retainer and ensure it
ispulledrmlyintoplace.
2. CORD RETAINER 3. CHECKS PRIOR TO OPERATION
WARNING!: ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
IMPORTANT: TO AVOID THE EXTENSION CORD FROM
DETACHING; ALWAYS CHECK THAT THE CORD IS ATTACHED
TO THE CORD RETAINER BEFORE USE.
Using the Cord Retainer
1. Check that the blades are
not damaged.
3. Check that the extension
cord is positioned in the
cordretainerrmly.
2. Make sure that the safety
guard is attached securely.
Before Using the Hedge Trimmer
WARNING!: MAKE SURE THAT THE WORK AREA IS
FREE OF ROCKS, DEBRIS, LINES AND OTHER FOREIGN
OBJECTS.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of
thistool.Beforeuse,inspecttheextensionleadforsignsofdamage,
wear and ageing. Replace the extension lead if damaged or defective.
Whenusinganextensionleadonareel,alwaysunwindthelead
completely. Use of an extension lead not suitable for the power input of
thetoolorwhichisdamagedordefectivemayresultinariskofreand
electric shock.

HTE-555
4. CONTROLS 5. USING THE HEDGE TRIMMER
OPERATION
1. Using one hand depress
and hold the safety
switch on the front
handle.
For user safety the safety switch and on/off switch must be
operated simultaneously.
2. To turn on squeeze the on/
off switch.
• Maintain proper footing and balance. Do not overreach.
• Do not cut hedges when wet. (For best results are achieved
when dry.)
3. Once either the safety
switch or on/off switch
is released the hedge
trimmer will slow to a stop.
• Ensure the extension cord is behind the trimmer and away
from operation.
Switching On and Off
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
WE RECOMMEND THE USE OF A RESIDUAL CURRENT
DEVICE (RATED 30mA OR LESS).
WARNING!: THE HEDGE TRIMMER MAY RUN FOR A FEW
SECONDS AFTER IT HAS BEEN SWITCHED OFF. LET THE
MOTOR COME TO A COMPLETE STANDSTILL BEFORE
SETTING THE TOOL DOWN.
WARNING!: ALWAYS USE THE HEDGE TRIMMER WITH
BOTH HANDS.
WARNING!: CLEAR THE AREA TO BE CUT BEFORE EACH
USE. REMOVE ALL OBJECTS, SUCH AS CORDS, LIGHTS,
WIRE, OR STRING WHICH CAN BECOME ENTANGLED IN THE
CUTTING BLADE AND CREATE A RISK OF SERIOUS PERSONAL
INJURY.
Top Cutting
Use a wide sweeping motion. A slight downward tilt of the
cutting blades in the direction of motion gives the best cutting
results.
Side Cutting
When trimming the sides
ofthehedge,beginatthe
bottom and cut upwards.
Trim the side of a hedge so
that it will be slightly narrower
at the top. This shape will
exposemoreofthehedge,
resulting in a more uniform
growth.
WARNING!: ALWAYS WEAR EYE PROTECTION BEFORE
COMMENCING OPERATION. USE PERSONAL PROTECTIVE
EQUIPMENT SUCH AS HEARING PROTECTION IF NECESSARY
AND A GOOD PAIR OF SAFETY GLOVES.

MAINTENANCE DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recyclingpackagingreducestheneedforlandllandrawmaterials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
•Whennotinuse,theHedgeTrimmershouldbestoredinadry,frostfree
location not within the reach of children.
• Keep ventilation slots of the Hedge Trimmer clean at all times and prevent any
foreign matter from entering.
• If the enclosure of the Hedge Trimmer requires cleaning do not use solvents
but a moist cloth only.
• There are no user serviceable parts in the Hedge Trimmer; if a fault is
suspectedorthesupplycordrequiresreplacement,returntheTrimmertoa
power tool repairer.
• The blade rail should be cleaned and treated with light machine oil or spray
lubricant(suchasWD40,CRC5.56orRP7)aftereachuse.Whenajoblasts
for a longer period of time it is recommended that the blade rail also be treated
with spray lubricant at regular intervals during operation.
Carbon Brushes
Whenthecarbonbrusheswearout,thehedgetrimmerwillsparkand/orstop.
Discontinue use as soon as this happens. They should be replaced prior to
recommencing use of the hedge trimmer. Carbon
brushes are a wearing component of the hedge
trimmer therefore not covered under warranty.
Continuing to use the hedge trimmer when carbon
brushes need to be replaced may cause permanent
damage to the hedge trimmer. Carbon brushes
will wear out after many uses but when the carbon
brushesneedtobereplaced,takethehedgetrimmer
to an electrician or a power tool repairer for a quick and low cost replacement.
Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the hedge trimmer by an unauthorised person or by
mishandling of the hedge trimmer. This tool is designed for DIY use - use in
commercial or industrial environments will void the warranty.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
VVolts Hz
~Alternating current W
/min Revolutions or
reciprocation per minute
Double insulated
no
Warning!
Wear eye protection
Regulator compliance mark
Read instruction manual
Disconnect the mains plug if the cord is damaged or entangled
Decibel level
Do not operate in the rain or leave the hedge trimmer outdoors
while raining.
Wear hearing protection
Wear safety gloves
Hertz
Watts
No load speed
102
Problem Cause Remedy
Blades are not
cutting smoothly.
Blades could be
worn or damaged
Contact customer service.
Excessive
sparking visible
through air vents
Carbon brushes
may have worn
out
Replace carbon brushes as
per maintenance section.
WARNING!: ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.

• Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the switch
isoffwhenclearingjammedmaterial.Amomentofinattentionwhileoperatingthe
hedgetrimmermayresultinseriouspersonalinjury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. When
transportingorstoringthehedgetrimmeralwaystthecuttingdevicecover.Proper
handlingofthehedgetrimmerwillreducepossiblepersonalinjuryfromthecutter
blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring or its own cord. Cutter blades contacting a
“live” wire may make exposed metal parts of the power tool “live” and could give the
operator an electric shock.
• Keep cable away from cutting area. During operation the cable may be hidden in
shrubs and can be accidentally cut by the blade.
• Perform visual inspection on the hedge being trimmed. To ensure no wire
fencesorforeignobjectsthatthehedgetrimmermaycontactduringoperation.
This appliance is not intended for use by persons (including children) with reduced
physical,sensoryormentalcapabilities,orlackofexperienceandknowledge,unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Beforeuse,inspecttheextensionleadforsignsofdamage,wearandageing.
Replace the extension lead if damaged or defective.
Whenusinganextensionleadonareel,alwaysunwindtheleadcompletely.Useof
an extension lead not suitable for the power input of the tool or which is damaged or
defectivemayresultinariskofreandelectricshock.
• Before use check the supply and extension cord for signs of damage or aging.
Ifthecordbecomesdamagedduringuse,disconnectthecordfromthesupply
immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the Hedge Trimmer if the cord is damaged or worn. • Keep
extension cord away from cutting blades.
• Never allow children or people unfamiliar with these instructions to use the Hedge
Trimmer.
•AvoidusingtheHedgeTrimmer,whilepeople,especiallychildrenorpets,are
nearby.
• Never operate the Hedge Trimmer with damaged guards or without guards in place.
• Switch on the Hedge Trimmer only when the hands and feet are away from the
cutting blades.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Always disconnect the Hedge Trimmer from the mains when leaving the Hedge
Trimmer unattended.
• Disconnect the Hedge Trimmer from the mains before carrying out maintenance or
cleaning work.
•Whennotinuse,storetheHedgeTrimmeroutofthereachofchildren.
•Facethecuttingbladesawayfromyourself,otherpeopleandanimalswhilethe
power is connected to the Hedge Trimmer (especially during operation).
•DisconnectthepowerfromtheHedgeTrimmerbeforemakinganyadjustments.
• Use both handles.
•Keepventilationopeningsclearofdebris.Keephandlesdry,cleanandfreeofoil
and grease.
• Never reach underneath the Hedge Trimmer (the cutting blade area) until it has
completely stopped and the power has been disconnected.
HEDGE TRIMMER SAFETY WARNINGS
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of re, electric shock,
personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an
emergency,beforeoperatingthetool.
Save these instructions and other documents supplied with this tool for future reference.
The manufacturer cannot accept any liability for damage or accidents which arise due to a failure to
follow these instructions and the safety information.
The electric motor has been designed for 230V and 240V only. Always check that the power supply
corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and
New Zealand.
This tool is double insulated therefore no earth wire is required.
The power supply for this product should be protected by a residual current device (rated at 30mA or
less). A residual current device reduces the risk of electric shock.
Ifthesupplycordisdamaged,itmustbereplacedbyanelectricianorapowertoolrepairerinorder
to avoid a hazard.
Thisapplianceisnotintendedforusebypersons(includingchildren)withreducedphysical,sensory
ormentalcapabilities,orlackofexperienceandknowledge,unlesstheyhavebeegivensupervision
or instruction concerning use of the appliance by a person responsible for their safety.
Note: Double insulation does not take the place of normal safety precautions when operating this
tool.Theinsulationsystemisforaddedprotectionagainstinjuryresultingfromapossibleelectrical
insulation failure within the tool.
Using an Extension Lead
Alwaysuseanapprovedextensionleadsuitableforthepowerinputofthistool.Beforeuse,inspect
theextensionleadforsignsofdamage,wearandageing.Replacetheextensionleadifdamaged
ordefective.Whenusinganextensionleadonareel,alwaysunwindtheleadcompletely.Useof
an extension lead not suitable for the power input of the tool or which is damaged or defective may
resultinariskofreandelectricshock.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power
tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
momentofinattentionwhileoperatingpowertoolsmayresultinseriouspersonalinjury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask,non-skidsafetyshoes,hardhat,orhearingprotectionusedforappropriateconditionswillreduce
personalinjuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your
ngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attachedtoarotatingpartofthepowertoolmayresultinpersonalinjury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts.Looseclothes,jewelleryorlonghaircanbecaughtinmovingparts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.Useofdustcollectioncanreducedust-relatedhazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool
willdothejobbetterandsaferattherateforwhichitwasdesigned.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid the hazard.
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY