Panasonic PAN1326C2 User manual

Wireless Connectivity
PAN1326C2
Bluetooth®Basic Data Rate and Low Energy Module
Quick Start Guide
Rev. 1.0

PAN1326C2 Bluetooth Module
Quick Start Guide Rev. 1.0 Page 2 of 20
Overview
Panasonic’s new PAN1326C2 is a Host Controller
Interface (HCI) Bluetooth®Radio Frequency (RF)
module that brings Texas Instruments™ seventh
generation Bluetooth core integrated circuit, the
CC2564C, to an easy-to-use module format. The
PAN1326C2 is Bluetooth 5 compliant and it offers
best-in-class RF performance with about twice the
range of other Bluetooth Low Energy (LE) solutions.
Panasonic’s tiny footprint technology has produced a
module of only 85.5 mm². The module is designed to
accommodate PCBs pad pitch of 1.3 mm and as few
as two layers for easy implementation and
manufacturing. The module has been designed to be
100 percent pin compatible with previous
generations of Texas Instruments based Bluetooth
HCI modules.
Features
•Bluetooth 5 compliant up to the HCI layer
•Best-in-class Bluetooth RF performance (Tx, Rx
sensitivity, blocking)
•Dimensions: 9 mm × 9.5 mm × 1.8 mm
•Based upon Texas Instruments CC2564C
•Interfaces: UART, GPIO, PCM
Characteristics
•Bluetooth 5
•Receiver sensitivity: -90 dBm
•Output power: 8 dBm
•Power supply: 1.7 V to 4.8 V
•Power consumption: Tx 40 mA
•Operating temperature range: -40 °C to 85 °C
Block Diagram
Chip
Antenna


Texas InstrumentsTM
CC2564C
Bluetooth HCI Chip
UART
GPIOs
Audio PCM/I2C
Reset

32 kHz input

VCC 3.3 V

LPF

PAN1326C2
Bluetoothâ5 Module
BR/EDR/LE

Crystal
26 MHz



PAN1326C2 Bluetooth Module
Quick Start Guide Rev. 1.0 Page 3 of 20
By purchase of any of the products described in this document the customer accepts the document's
validity and declares their agreement and understanding of its contents and recommendations. Panasonic
Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time
without notification.
© Panasonic Industrial Devices Europe GmbH 2021.
This document is copyrighted. Reproduction of this document is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do not
disclose it to a third party.
All rights reserved.
This Quick Start Guide does not lodge the claim to be complete and free of mistakes.
The information contained herein is presented only as guidance for Product use. No responsibility is
assumed by Panasonic for any infringement of patents or any other intellectual property rights of third
parties that may result from the use of Product. No license to any intellectual property right is granted by
this document, whether express or implied, by estoppel or otherwise.
Description of hardware, software, and other information in this document is only intended to illustrate the
functionality of the referred Panasonic product. It should not be construed as guaranteeing specific
functionality of the product as described or suitable for a particular application.
Any provided (source) code shall not be used or incorporated into any products or systems whose
manufacture, use or sale is prohibited under any applicable laws or regulations.
Any outlined or referenced (source) code within this document is provided on an “as is” basis without any
right to technical support or updates and without warranty of any kind on a free of charge basis according
to § 516 German Civil Law (BGB) including without limitation, any warranties or conditions of title, non
infringement, merchantability, or fitness for a particular purpose. Customer acknowledges that (source)
code may bear defects and errors.
The third party tools mentioned in this document are offered by independent third party providers who are
solely responsible for these products. Panasonic has no responsibility whatsoever for the performance,
product descriptions, specifications, referenced content, or any and all claims or representations of these
third party providers. Panasonic makes no warranty whatsoever, neither express nor implied, with respect
to the goods, the referenced contents, or any and all claims or representations of the third party providers.
To the maximum extent allowable by Law Panasonic assumes no liability whatsoever including without
limitation, indirect, consequential, special, or incidental damages or loss, including without limitation loss of
profits, loss of opportunities, business interruption, and loss of data.

PAN1326C2 Bluetooth Module
Quick Start Guide Rev. 1.0 Page 4 of 20
Table of Contents
1About This Document.........................................................................................................................5
1.1 Purpose and Audience ..............................................................................................................5
1.2 Revision History.........................................................................................................................5
1.3 Use of Symbols .........................................................................................................................5
1.4 Related Documents...................................................................................................................6
2Overview..............................................................................................................................................7
3Setting up the Toolchain....................................................................................................................8
3.1 Installing “CC2564CMSP432BTBLESW1”.................................................................................8
3.2 Installing “Code Composer Studio”............................................................................................8
3.3 Starting “Code Composer Studio”..............................................................................................9
4Setting up the Demo.........................................................................................................................11
4.1 Loading the Demo ...................................................................................................................11
4.2 Connecting the Evaluation Board............................................................................................13
4.3 Flashing the Code ...................................................................................................................13
4.4 Setting up “iBeacon (Bluetooth Low Energy)”..........................................................................14
4.5 Setting up “SPP (Bluetooth Classic)“.......................................................................................15
5Restricted Use...................................................................................................................................19
5.1 Life Support Policy...................................................................................................................19
5.2 Restricted End Use..................................................................................................................19
6Contact Details..................................................................................................................................20
6.1 Contact Us...............................................................................................................................20
6.2 Product Information .................................................................................................................20


PAN1326C2 Bluetooth Module 1 About This Document
Quick Start Guide Rev. 1.0 Page 5 of 20
1 About This Document
1.1 Purpose and Audience
This Quick Start Guide provides details on how to start developing applications on the
Panasonic PAN1326C2 module:
•Installing toolchain,
•Setting up the demo “iBeacon (Bluetooth Low Energy)” demo by using Panasonic
development kit and receive beacon data in app, and
•Setting up the demo “SPP (Bluetooth Classic)” by using Panasonic development kit and
transmit strings from terminal to application via PAN1326C2.
It is intended for research and developement engineers.
The product is referred to as “the PAN1362C2” or “the module” within this document.
1.2 Revision History
Revision
Date
Modifications/Remarks
1.0
2021-05-31
First version
1.3 Use of Symbols
Symbol
Description
Note
Indicates important information for the proper use of the product.
Non-observance can lead to errors.
Attention
Indicates important notes that, if not observed, can put the product’s functionality
at risk.
Tip
Indicates useful information designed to facilitate working with the software.
[chapter number]
[chapter title]
Cross reference
Indicates cross references within the document.
Example:
Description of the symbols used in this document 1.3 Use of Symbols.
✓
Requirement
Indicates a requirement that must be met before the corresponding tasks can be
completed.
➔
Result
Indicates the result of a task or the result of a series of tasks.


PAN1326C2 Bluetooth Module 1 About This Document
Quick Start Guide Rev. 1.0 Page 6 of 20
Symbol
Description
This font
GUI text
Indicates fixed terms and text of the graphical user interface.
Example:
Click Save.
Menu > Menu item
Path
Indicates a path, e.g. to access a dialog.
Example:
In the menu, select File > Setup page.
This font
File names, userinput
Indicates file names or messages and information displayed on the screen or to
be selected or entered by the user.
Examples:
pan1760.c contains the actual module initialization.
Enter the value Product 123.
This font
Systemoutput
Indicates messages and information displayed on the screen.
Example:
The message Failed to save your data is displayed.
Key
Key
Indicates a key on the keyboard.
Example:
Press F10 .
1.4 Related Documents
For related documents please refer to the Panasonic website 6.2 Product Information.


PAN1326C2 Bluetooth Module 2 Overview
Quick Start Guide Rev. 1.0 Page 7 of 20
2 Overview
Panasonic’s new PAN1326C2 is a Host Controller Interface (HCI) Bluetooth RF module that
brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2564, to
an easy-to-use module format. The PAN1326C2 is Bluetooth 5 compliant and it offers
best-in-class RF performance with about twice the range of other Bluetooth LE solutions.
Panasonic’s tiny footprint technology has produced a module of only 85.5 mm². The module is
designed to accommodate PCBs pad pitch of 1.3 mm and as few as two layers for easy
implementation and manufacturing. The module has been designed to be 100 percent pin
compatible with previous generations of Texas Instruments based Bluetooth HCI modules.
For related documents please refer to 6.2 Product Information.


PAN1326C2 Bluetooth Module 3 Setting up the Toolchain
Quick Start Guide Rev. 1.0 Page 8 of 20
3 Setting up the Toolchain
The following guide is based on a Windows 64-Bit desktop version and CCSTUDIO single file
installation.
3.1 Installing “CC2564CMSP432BTBLESW1”
The following requirement must be met:
✓Account at Texas Instruments (https://www.ti.com)
1. Go to https://www.ti.com/tool/CC2564CMSP432BTBLESW and download
CC2564CMSP432BTBLESW1.
2. Start and install the downloaded file setup.exe.
The executable file has installed all the necessary drivers, libraries, and code examples
to develop Bluetooth applications on MSP432 MCUs.
Now the “CC2564CMSP432BTBLESW1” is installed.
3.2 Installing “Code Composer Studio”
The following requirement must be met:
✓Account at Texas Instruments (https://www.ti.com)
1. Go to https://www.ti.com/tool/CCSTUDIO and download the “Code Composer Studio“.
There are two options available, the desktop version (CCSTUDIO) and cloud version
(CCSTUDIO-CLOUD).


PAN1326C2 Bluetooth Module 3 Setting up the Toolchain
Quick Start Guide Rev. 1.0 Page 9 of 20
CCSTUDIO can be downloaded as “single file” or “on-demand”. If you
do not want interference with your installed anti-virus program, then it
is recommended to use the single file installer.
2. Extract the downloaded file CCS10.x.x.xxxxx_win64 and locate the file
ccs_setup_10.x.x.xxxxx.exe in the extracted folder.
3. Start and install the setup.
If you want to install specific devices to save disk space, choose Recommended
Installation, otherwise choose Full Installation.
4. Select the component SimpleLink MSP432 low power + performance MCUs (1) for
applications with PAN1326C2 and TI EVK (Texas Instruments evaluation kit).
5. Click Next > (2) and complete the setup by following the instructions. Leave the debug
probes selection as it is.
Now the “Code Composer Studio” is installed.
3.3 Starting “Code Composer Studio”
Before starting programming, always update “Code Composer Studio” and the
compilers to the newest version.
The following requirements must be met:
✓The “CC2564CMSP432BTBLESW1“ is installed 3.1 Installing
“CC2564CMSP432BTBLESW1”.
✓The “Code Composer Studio“ is installed 3.2 Installing “Code Composer Studio”.


PAN1326C2 Bluetooth Module 3 Setting up the Toolchain
Quick Start Guide Rev. 1.0 Page 10 of 20
1. Start Code Composer Studio.
2. Choose the location for your workspace.
The path to your workspace must include only alphanumeric
characters to avoid compiler errors in some examples.
The default workspace by “Code Composer Studio” includes always
an underline “_”. Change the name of the workspace or create a new
one without special characters.
3. Click the tab Help (1) > Check for Updates (2) to update “Code Composer Studio” and
the compilers to the newest version.
➔The updating process will start.
4. After the updating process is completed: Go to the page Getting Started and click
Import Project.
Alternatively click the tab File > Open Project from File System.
Choose only projects from the folder “Code Composer Studio”
because “Code Composer Studio”ist used.