Panasonic VL-SWH705 Series User manual

Quick Reference Guide
Wireless Video Intercom System
VL-SWH705 series
Model No.
*1 It is the Part No. printed on the unit.
Model composition
●VL-SWH705KL(①+ ③+ ④) ●VL-SWH705KS(②+ ③+ ④)
●VL-SVH705KLC(①+ ③+ ⑤) ●VL- 705KSC(②+ ③+ ⑤)
●VL-SVH705KL (①+ ③) ●VL- 705KS (②+ ③)
①VL-VH573*1③VL-MWH705*1
Table of Contents
Door Station (Doorphone)
Parts Descriptions .................................................................................................................2
Wireless Sensor Camera (Camera)
Parts Descriptions .................................................................................................................3
Main Monitor Station (Main monitor)
Parts Descriptions .................................................................................................................4
Basic Operations ...................................................................................................................5
Sub Monitor Station (Sub monitor)
Parts Descriptions .................................................................................................................6
Basic Operations ...................................................................................................................7
Thank you for purchasing a Panasonic product.
●This guide explains some basic features and operations, but not all of them. For further details,
see the Japanese operating instructions.
●This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
●Any details given in this guide are subject to change without notice.
②VL-VH556*1④VL-WD616*1⑤VL-WD813*1
Video Intercom System with Wireless Sensor Camera/
Video Intercom System
VL-SVH705 series
Model No.
Door Station
(Doorphone) Main Monitor Station (Main monitor) Sub Monitor Station (Sub monitor) Wireless Sensor Camera (Camera)

Parts Descriptions
2
Door Station (Doorphone)
■VL-VH573 ■VL-VH556 ①Microphone
②Camera lens
③Speaker
④Call button & indicator (red)
⑤LED lights
Door Station (Doorphone)

3
①Lens cover & Lens(inside the
cover)
②LED lights
③Indicator lamp (See the following
explanation.)
④Safety wire
⑤Sensor range cap (standard type)
4 types of lens caps (accessories)
can be fitted as required. (See the
Camera’s Installation Guide.)
⑥Heat sensor
Detects changes in temperature.
⑦Microphone
⑧Speaker
⑨Register button cover
⑩Register button (behind the
register button cover)
Used when registering the camera
to the main monitor. (In case of VL-
SVH705KLC & VL-SVH705KSC, the
camera has already been registered
in the main monitor.)
⑪Heat sensor lever
Used to change the angle of the
heat sensor. (See the Camera’s
Installation Guide.)
Parts Descriptions
Wireless Sensor Camera (Camera)
Wireless Sensor Camera (Camera)
■VL-WD813
〈Rear view 〉
Indicator lamp
After the camera has been registered to the main monitor, you can check the camera’s status and
the wireless signal status from the main monitor by checking the status of the indicator lamp.
Indicator display Camera’s status
Transmission
status
Flashing green
(fast) A sensor has been triggered and the camera is calling the main monitor.
Flashing green
(slow) The camera is transmitting data to the main monitor.
Signal status
(during
standby)
Lit green Indicates the signal status from the main monitor.
●We recommend installing the camera in an area
where the status indicator is strong (when the
indicator is lit green).
Lit orange
Lit red
Flashing red Transmissions cannot be sent because there is no signal (out of range).

Parts Descriptions
Main Monitor Station (Main monitor)
1Display(Touch Panel)
●Only touch the display using your
fingers.
●If there is an unlocked electrical
lock or an open window/door, the
indicator lights in red.
●Touch the button to check the state
of the electric lock, lock/unlock,
check the status of the window/
door sensor, etc.
2
Speaker
5
Reset button
●If the main monitor cannot be
correctly operated, press the Reset
button with a pointed object to
reset the main monitor. (Recorded
images and the configured settings
are not affected.)
●It takes approx. 1 minute to be
usable after the reset operation.
10
4
●Arm(At Home/Away)：lights on (red)
Disarm ：lights off
3
【終了】：OFF button
7
SD card slot
9
Main Monitor Station (Main monitor)
3 421
6 75
8
9
10
●Flashes when there are unviewed
doorphone’s images or there is a
notification. (When the display is
touched, the top menu is displayed
and the indicator stops flashing.)
4
【通話】：Talk button & indicator (blue)
6
Microphone
8
Confirm door lock button
& indicator (red)
Arm mode indicator (red)
Notification indicator (blue)

Basic Operations
■To answer a call from a doorphone
When the ringer tone is heard and the display turns on, press【通話】( ) and talk to the
visitor.
■To monitor the outside with the doorphone
1. Touch the display (touch panel) ( ). ⇒Touch［モニター］.
●When the other devices(camera etc.) can be monitored are connected
Touch . ⇒Ｔouch doorphone image. （When there are multiple doorphones,
touch the desired doorphone number, then touch the doorphone image.)
2. Monitor the sound and image.
●You can talk to the monitored party by pressing【通話】.
■To monitor the outside with the camera
1. Touch the display (touch panel). ⇒Touch［モニター］. ⇒Touch . ⇒Touch the
camera image.
●When there are multiple cameras, touch the desired camera number, then touch the
camera image.
2. Monitor the sound and image.
■To record the monitored image manually
Touch ［録画］ while monitoring an outside image.
■To play recorded images
1. Touch the display (touch panel). ⇒Touch ［ 録画の一覧］.
●When you use the camera, you can switch the doorphone’s image list and the camera’s
image list by touching [カメラ一覧へ]/[ドアホン一覧へ].
2. Touch the desired date and then touch the desired image.
●The recorded image is played back.
■To call the sub monitor
1. Touch the display (touch panel). ⇒Touch［ 室内呼］.
●When there are multiple devices that can be selected：
-Ｙou can select the desired device on the sub monitor’s list.
-Ｙou can call all devices by touching [一斉呼出].
2. Page the other party, then talk with the paged party when they answer the call.
5
The number after the button shows the location of the button described in the previous page.
6
1

Parts Descriptions
Earpiece
13
Display
1
You can use ～after registering
the sub monitor to the base unit of
telephone or fax.
13 16
■VL-WD616
6
Multifunction buttons
2
Sub Monitor Station (Sub monitor)
The flip is opened.
13
1
2
14
3
4
5
9
8
6
10
15
7
11
16
12
：Navigator button
：Set button
Monitor button & indicator (red)
3
Charge lamp
4
OFF button
9
Microphone
11
Flip
12
Sharp button
16
Talk button & indicator (blue)
for telephone
14
Tone button (to switch to tone
dialing)
15
Battery cover
7
Speaker
6
Antenna (built-in)
5
Intercom/Hold button
8
Talk button & indicator (blue) for
doorphone
10
Sub Monitor Station (Sub monitor)

■To answer a call from a doorphone
When the ringer tone is heard and the
display turns on, press ( ).
■To monitor the outside with the
doorphone or the camera
1. Press ( ).
●When there are multiple devices that
can be selected, select the desired
device by using ( ) and press
().
2. Monitor the sound and image.
■To record the monitored image manually
1. Press ( ) while monitoring an
outside image.
2. Select録画using and press .
■To play recorded images
1. Press ( )( ).
●When you use the camera, you can
switch the doorphone’s image list and
the camera’s image list by pressing
().
2. Select the desired date using and
press .
3. Press .
●The recorded image is played back.
■To call the main monitor or another sub
monitor
1. Press ( ).
●When the sub monitor is registered to
the base unit of telephone or fax,
selectドアホン室内呼using
and press .
●When there are multiple devices that
can be selected：
- You can select the desired device by
using and press .
(You can call all devices by selecting
一斉呼出.)
2. Page the other party, then talk with the
paged party when they answer the call.
2
7
3
2
Basic Operations
The number after the button shows the location of the button described in the previous page.
Doorphone function
メニュー
録画一覧
■To make a call
1. Lift the sub monitor from the charger and
press ( ).
2. Open the flip and dial the phone number.
●To end the call, press ( ).
■To receive a call
When the phone rings, press and talk.
●To end the call, press .
■To make a call using the speakerphone
(Hands-free talk)
1. Press for approx. 2 seconds.
2. Open the flip and dial the phone number,
then talk to the microphone.
●Speak clearly about 50 cm away from
the microphone.
●To switch to the earpiece, press for
approx. 2 seconds again.
●To end the call, press .
■To place the current call on hold
Press during a call.
■To retrieve the held call
Press .
■To transfer the held call to the base unit
or another sub monitor of telephone/fax
1. Press during a call.
2. Press ( ).
●When there are multiple devices that
can be selected：
- You can select the desired device by
using and press .
(You can call all devices by selecting
一斉呼出.)
3. Press when the other party
answers.
14
Telephone function
9
内線呼出
2
8
10
2