Panasonic VL-V900 User manual

Quick Reference Guide for VL-V900
This document explains the basic operations of the VL-V900. For further details, refer to the operating
instructions of the VL-V900 on the web.
http://panasonic.net/pcc/support/intercom/v900
Controls
Lobby Station
AHeat sensor
Turns on the display when a visitor is detected.
BLens cover
CLight
Illuminates subjects in dark environments.
DDisplay
EKeypad
FSpeaker
GCamera lens
HMicrophone
ISearch buttons ( and )
Used to select items shown on the display, adjust settings, etc.
JCancel button ( )
KCall button ( )
Image viewing screen of the main monitor station
Image from lobby station Image from camera
VOICE CHG VOLUME MENU
LOBBY1
VOICE CHG VOLUME MENU
CAMERA1
Status icons
LOBBY1
Indicates which lobby station is calling, monitoring, or talking. ("1" indicates the device number)
CAMERA1
Indicates which camera is monitoring. ("1" indicates the device number)
DOOR
Indicates the doorphone is calling, monitoring, or talking.
OTHER
Indicates the other person (lobby station or PBX extension) is calling when monitoring or talking
with another device.
G
H
I
J
K
A
C
B
D
E
F
© Panasonic System Networks Co., Ltd. 2015
#PNQW4903ZA C0915HH0

Basic operation
Enter the room number with the keypad → { }.When the ringer tone is heard, press {TALK}.
L Conrm the caller before answering.
Other operation
At the lobby station
Searching by rst letter of the name
1Press { } → use the keypad to enter the rst letter of the resident’s name.
2Press { } or { } to search for the desired name.
3Press { } to call.
Opening the door by entering an unlock code
1Press {#} → enter the 4-digit unlock code.
LFor information about unlock code, please contact your building manager.
2Press { } to unlock.
Switching the image displayed on the main monitor station
While talking to the main monitor station, press {#}to switch the image displayed on the main monitor station
from the lobby station to the camera. To return to the lobby image, press {}.
At the main monitor station
Monitoring the lobby station or camera image
1Press {MONITOR}.
2Press {VOLUME}(
▲
) or {PAGE} (▲) to select the desired destination → {MENU}(OK).
LIf a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing {MONITOR}.
Opening the door
You can open the lobby door while talking or monitoring the lobby station image. Press {DOOR KEY}to open the door.
Calling the PBX extension
1Press {TALK}.
2Press {VOLUME}(
▲
) or {PAGE} (▲) to select the desired destination → {MENU}(OK).
Please note the following system conditions and limitations.
LOnly one call or monitoring session can be handled at a time.
Low priority: Monitoring
Medium priority:
General calls (lobby station to main monitor station, main monitor station to PBX extension, etc.)
High priority: Emergency calls (Available for certain system congurations only. Not available for VL-MW251.)
LAll calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
LFollowing features are not available for the lobby station:
– Door station connection settings
– Door key settings
– Automatic illumination settings
LIn order to perform the above operations, optional devices and conguration for those devices are required.
Contact your building manager for more information.