Panasonic PIN Photodiodes PNZ334 (PN334) User manual

SHE00042DED
This product complies with the RoHS Directive (EU 2002/95/EC).
Publication date: January 2009 1
PIN Photodiodes
PNZ334 (PN334)
Silicon planar type
For optical control systems
Features
Plastic type package (φ5)
High coupling capabillity suitable for plastic fiber
High quantum efficiency
High-speed response
Absolute Maximum Ratings Ta= 25°C
Parameter Symbol Rating Unit
Reverse voltage VR30 V
Power dissipation PD100 mW
Operating ambient temperature Topr –25 to +85 °C
Storage temperature Tstg –30 to +100 °C
Electrical-Optical Characteristics Ta= 25°C±3°C
Parameter Symbol Conditions Min Typ Max Unit
Photocurrent *1ILVR= 10 V, L = 1 000 lx 5.0 7.0 µA
Drain current IDVR= 10 V 0.1 10 nA
Terminal capacitance CtVR= 0 V, f = 1 MHz 6 pF
Peak sensitivity wavelength λPD VR= 10 V 850 nm
Half-power angle θThe angle when the photocurrent is
halved 70 °
Rise time *2trVR= 10 V, RL= 50 W 2 ns
Fall time *2tf2 ns
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Spectral sensitivity characteristics: Sensitivity for wave length over 400 nm maximum sensitivity ratio is 100%.
3. This device is designed by disregarding radiation.
4. *1:Source: Tungsten lamp (color temperature 2 856K)
*2: Switching time measurement circuit
50 Ω
λP=900 nm
tr: Rise time
tf:Fall time
Sig. in
RL
VR
Sig. out
(Input pulse)
(Output pulse) 10%
90%
trtf
Note) The part number in the parenthesis shows conventional part number.

SHE00042DED
This product complies with the RoHS Directive (EU 2002/95/EC).
PNZ334
2
Rise time
tr,
Fall time
tf(ns)
Load resistance RL(kΩ)
Coupling loss
LX, LY(dB)
Distance X, Y (mm)
Coupling loss
LZ(dB)
Distance Z (mm)
Photocurrent IL(µA)
Illuminance L (lx)
Photocurrent IL(µA)
Ambient temperature Ta(°C)
Terminal capacitance C
t
(pF)
Reverse voltage VR(V)
Photocurrent IL(µA)
Reverse voltage VR(V)
Dark current ID(nA)
Ambient temperature Ta(°C)
Relative sensitivity ∆S (%)
Wavelength λ(nm)
103
102
10
1
10−1
10−2
10 102103104
1
20
16
12
8
0
4
−40 0 40 80
102
10
1
10−1
10−2
10−3
−40 0 40 80
VR=10 V
L =1 000 lx VR=10 V VR=10 V
Ta=25°C
X, Y =0 mm
Ta=25°C
16
12
8
4
10 30 40 5020
00
103
102
1
10
1 102 10
10−1
10−1
Ta=25°C
VR=10 V
Ta=25°C
100
80
60
40
20
200 600400 800 1 2001 000
0
103
102
10
1
10−1
10−210−11 10
0
2
1
3
4
0.4 0.8 1.2 1.6
5
0
2
1
3
4
5
0−0.8 −0.4 0.40 0.8
L =1 000 lx
L =500 lx
Y
X
Z
Fiber
φ1 mm
Y
X
Z
Fiber
φ1 mm
Z =0 mm
Z =0.3 mm
ILL ILVRCtVR
ILTaIDTa ∆ S  λ
tr, tfRLLZZ LX, LYX, Y

SHE00042DED
This product complies with the RoHS Directive (EU 2002/95/EC).
PNZ334
3
Package (Unit: mm)
LPTFTN2S0001
Pin name
1: Anode
2: Cathode

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20080805