Panasonic KX-TDA30 User manual

This document provides information unique to the KX-TDA30.
For details on features not explained here, refer to the KX-TDA100/KX-TDA200 documentation.
Model no. KX-TDA30
Hybrid IP-PBX
User Manual/Feature Guide

2 Feature Guide
Table of Contents
1 User Manual Description ................................................................3
1.1 Differences Between the KX-TDA30 and KX-TDA100/200 User Manuals .......... 4
1.1.1 Features Unavailable on the KX-TDA30................................................................... 4
1.1.2 Additional Information and Features of the KX-TDA30 ............................................ 4
2 Feature Guide Description ............................................................. 5
2.1 Differences Between the KX-TDA30 and KX-TDA100/200 Feature Guides ....... 6
2.1.1 Features Unavailable on the KX-TDA30................................................................... 6
2.1.2 Additional Information and Features of the KX-TDA30 ............................................ 6
2.1.2.1 Digital eXtra Device Port (Digital XDP) .................................................................................................. 7
2.1.2.2 Caller ID to Analogue Extension ............................................................................................................ 8

Feature Guide 3
Section 1
User Manual Description

1.1 Differences Between the KX-TDA30 and KX-TDA100/200 User Manuals
4 Feature Guide
1.1 Differences Between the KX-TDA30 and KX-
TDA100/200 User Manuals
1.1.1 Features Unavailable on the KX-TDA30
Description
The feature which is unavailable on the KX-TDA30 is described below.
1.1.2 Additional Information and Features of the KX-TDA30
Description
Additional information and features unique to the KX-TDA30 are described below.
Unavailable Feature Section of KX-TDA100/
200 User Manual
Message Waiting for SLT
The KX-TDA30 cannot turn on the message waiting light of a
single line telephone (SLT). If the extension receives a message
waiting indication, the light will not turn on.
• 1.2.4 When the Dialled
Line is Busy or There is No
Answer—Leaving a
Message Waiting
Indication/Calling Back the
Caller Which Left an
Indication (Message
Waiting)
Additional Information and Features Section of KX-TDA100/
200 User Manual
Outgoing Call Log
• The outgoing call log can be displayed by simply
pressing the REDIAL button while on-hook.
• 1.11.1 Using the Call
Log—Calling with the
Outgoing Call Log
System Speed Dialling Directory
• The System Speed Dialling Directory can be displayed
by simply pressing the AUTO DIAL/STORE button
while on-hook.
• 1.11.2 Using the
Directories

Feature Guide 5
Section 2
Feature Guide Description

2.1 Differences Between the KX-TDA30 and KX-TDA100/200 Feature Guides
6 Feature Guide
2.1 Differences Between the KX-TDA30 and KX-
TDA100/200 Feature Guides
2.1.1 Features Unavailable on the KX-TDA30
Description
Features which are unavailable on the KX-TDA30 are listed below.
2.1.2 Additional Information and Features of the KX-TDA30
Description
Additional information and features unique to the KX-TDA30 are described below.
Unavailable Features Section of KX-TDA100/
200 Feature Guide
SLT with a Message Waiting Lamp
The KX-TDA30 cannot turn on the message waiting light of a
single line telephone (SLT). If the extension receives a message
waiting indication, the light will not turn on.
• 1.17.1 Message Waiting
E1 Line Service Features • 1.20 E1 Line Service
Features
T1 Line Service Features • 1.21 T1 Line Service
Features
Additional Information and Features Section of KX-TDA100/
200 Feature Guide
Doorphone Call
Doorphones 1 and 2 (or 3 and 4) cannot make a call
simultaneously. If a doorphone user tries to make a call while
the other doorphone is engaged in a call, the destination will
ring but no sound will be heard on either end when the call is
answered.
Doorphones 1 and 2 (or 3 and 4) cannot receive a call
simultaneously. If an extension user calls a doorphone while the
other doorphone is engaged in a call, the caller will hear a busy
tone.
• 1.15.1 Doorphone Call
Outgoing Call Log
Pressing the REDIAL button on a display DPT while on-hook
can display the Outgoing Call Log.
• 1.6.1.4 Last Number
Redial
System Speed Dialling Directory
Pressing the AUTO DIAL/STORE button on a display DPT or
KX-T7735 while on-hook can display the System Speed Dialling
Directory.
• 1.6.1.5 Speed Dialling—
Personal/System

2.1 Differences Between the KX-TDA30 and KX-TDA100/200 Feature Guides
Feature Guide 7
2.1.2.1 Digital eXtra Device Port (Digital XDP)
Description
A digital proprietary telephone (DPT) has a jack to connect another telephone. A DPT can be
connected to another DPT via the jack and used as an independent extension. This connection
is useful to increase the number of DPTs without additional extension cards. The DPT that is
connected directly to the extension port is called the "master DPT", and the DPT connected to
the master is the "slave". Both DPT can have their own settings (e.g., extension number, COS)
so that they can act as completely different extensions.
Conditions
• To use this feature, both the master DPT and slave DPT must be KX-T7600 series
(except KX-T7640).
•XDP Mode
In addition to a slave DPT, an SLT can be used in parallel or XDP mode with a master
DPT that is connected to a hybrid extension port.
• The Off-Hook Call Announcement (OHCA) feature cannot be used with DPTs in
Digital XDP connection. When an OHCA is received, a call waiting tone will be heard.
Note that Whisper OHCA can be used as with other DPTs.
• USB Modules must not be connected to DPTs in Digital XDP connection. If a personal
computer (PC) is connected to a master DPT via a USB Module, the PC cannot be
used for the PC Phone, PC Console, or Computer Telephony Integration (CTI)
Digital eXtra Device Port (Digital XDP)
This is additional feature for the KX-TDA30. For details, refer to
2.1.2.1 Digital eXtra Device Port (Digital XDP).
—
Caller ID to Analogue Extension
This is additional feature for the KX-TDA30. For details, refer to
2.1.2.2 Caller ID to Analogue Extension.
—
Additional Information and Features Section of KX-TDA100/
200 Feature Guide
PBX
Master DPT Slave DPT
SLT
DPT
Port
Hybrid
Extension
Port
Master DPT Slave DPT

2.1 Differences Between the KX-TDA30 and KX-TDA100/200 Feature Guides
8 Feature Guide
feature. Also, if a USB module is connected to a slave DPT, the DPT cannot work
properly.
• The PBX supports a maximum of 24 DPTs. Note that the Digital XDP connection does
not increase the maximum number of DPTs that can be connected to the PBX.
2.1.2.2 Caller ID to Analogue Extension
Description
A Caller ID-compatible SLT user can receive Caller ID information, such as the caller’s name
and telephone number, when receiving a call.
Notice
• This feature complies with the following specifications:
Bellcore
ETSI (European Telecommunications Standards Institute): ETS 300 659 Subscriber
line protocol over the local loop for display (and related) services; Part 1: On hook
data transmission (only clause 6.1.1 [FSK signal transmission during ringing])
• There is no compliance for the method using DT-AS signal, line reversal signal, or
DTMF signal.
Conditions
•Hardware Requirement: EXT-CID card
• Up to 8 SLTs can be programmed to receive Caller ID information through system
programming.
• To ensure that this feature will function properly, use Panasonic SLTs.
• When receiving an intercom call, the calling extension number and name will be sent
to an SLT.
• When receiving a trunk call, the caller’s telephone number will be sent to an SLT. If
the received number matches a number in the System Speed Dialling Table, and a
name is assigned, the caller name will be also sent. However, depending on the type
of SLT, the name may not be shown on the display.
• When the Caller ID number of an incoming trunk call is sent to an SLT, system
programming determines if a Trunk Access number is automatically added to the
telephone number to make it easier to call the number back.
• A maximum of 16 digits of the telephone number can be handled by the Caller ID
feature. If the telephone number is more than 16 digits, only the first 16 digits
(excluding a Trunk Access number, if it is added) will be sent to an SLT.
• For an SLT that is connected to a PT in parallel, receiving Caller ID information is
available only when the SLT is set to ring.
• If the information of the reason for absence of the caller number and name (Private,
Out of Area) or call qualifier (Long Distance) is received from a trunk, the information
will be sent to an SLT.
• If a call is transferred to an SLT, a transferring extension number and name will be sent
to the SLT. If the transferring extension goes on-hook while transferring the call, the
call information of the transferred party will be sent to the SLT.

2.1 Differences Between the KX-TDA30 and KX-TDA100/200 Feature Guides
Feature Guide 9