Panasonic KX-TA624 User manual

PANASONIC
Panasonic KX-TA624 / 824 Telephone System
Changing the time on a Panasonic KX-TA624 system must be
done from extension # 101 using a display phone.
1.-
Press the "PROGRAM" button on the face of the phone
2.-
Enter programming mode by pressing "STAR" -
"POUND" - "1234" (default password = 1234)
3.-
Enter program # 000
4.-
Press "SPEAKER" button
5.-
Press "FORWARD/DND" button to change to the hour
selection
6.-
Press "TRANSFER" button and enter the hour
7.-
Press "FORWARD/DND" button to change to the minutes
parameter
8.-
Press "TRANSFER" button and enter the minutes
9.-
Press "FORWARD/DND" button to change to the AM/PM
parameter
10
Press "MUTE" button to select AM or PM
11.-
Press "STORE" button (listen for 1 tone if procedure was
executed correctly / 3 tones if procedure failed)
12.-
Press "HOLD" button
13.-
Press the "PROGRAM" button on the face of the phone
Panasonic KX-TVS Voice Mail System
Changing the time on a Panasonic KX-TVS voice mail system
can be done from any phone.
1.-
Dial the TVS pilot number (extension 107 or 115)
2.-
When the voice mail system answers press "#" + "6" +
"STAR"
3.-
Log into the message manager's mailbox (999)
4.-
Press "6" for other features
5.-
Press "3" to set the time & date
6.-
Press "1" to change the current time (press "0" for help)
7.-
Enter the hour then press "#" or enter the hour and minutes
then press "#"
8.-
Press "1" for AM or "2" for PM
9.-
Press "2" to accept the new time

Panasonic Time Set KXT-61610 KSU
KX-T61610
1.-
Use phone with intercom number 11. It will change the
time for all phones.
2.-
Keep handset down and press INTERCOM button.
3.-
Dial 77.
4.-
Dial the hour, with two digits (e.g. 03 for 3 o'clock).
5.-
Dial the minutes, with two digits (e.g. 07 if it is now 7
minutes after the hour).
6.-
Dial 0 for AM or 1 for PM.
7.-
Press #.
8.-
Press SP-PHONE
Panasonic Digital Telephone System
Changing the time on a Panasonic digital system can be done
from any display phone.
1.-
Enter programming mode by pressing "PAUSE" then
"STAR" button twice, followed by 1, 2, 3, 4
2.-
Enter program # "000"
3.-
Press "SPEAKER" button
4.-
Press "FORWARD/DND" button to change to the hour
selection
5.-
Press "TRANSFER" button and enter the hour
6.-
Press "FORWARD/DND" button to change to the minutes
parameter
7.-
Press "TRANSFER" button and enter the minutes
8.-
Press "FORWARD/DND" button to change to the AM/PM
parameter
9.-
Press "MUTE" button to select AM or PM
10.-
Press "STORE" button
11.-
Press "HOLD" button
12.-
Lift and replace handset
Panasonic DBS System

From the designated attendant console (usually x100, but not
always), enter the following code sequence:
To set the date and time:
1.-
Press the ON/OFF key
•The phone issues intercom dial tone.
•The current date and time are displayed on your LCD.
2.-
Press the PROG key.
"F" appears on the display
3.-
Dial "##."
"Program Mode:" appears on the first line of the display;
"MAIN MODE" appears on the second line.
4.-
Press the FF1 key.
"SELECT SUB MODE" appears on the second line of the
display.
5.-
Dial "1#."
"1:DATE 2:TIME" appears.
6.-
Dial "1#."
"MONTH/DAY/YEAR" appears.
7.-
Enter six digits for the month, day, and year.
For example, to set the date to March 3, 1993, enter
"030393."
8.-
Press #.
"TIME SET MODE appears on the display.
9.-
Enter four digits for hours and minutes (24-hr. time).
For example, for 11:00 a.m., enter "1100."
10.-
Press #.
11.-
Press the ON/OFF key.
The new date and time appear on the display
Panasonic Digital Telephone System
Changing the time on a Panasonic KX-TD, KX-TDA or KX-
TDE digital system can be done from any display phone.
1.-
Enter programming mode by pressing "PROGRAM"
button then "STAR" button twice, followed by 1, 2, 3, 4
2.-
Enter program "000" and press Enter
3.-
Press "SPEAKER" button two times, you will see the time.
4.-
Enter the correct hour.
5.-
Press "FORWARD/DND" button to advance to the minute
selection
6.-
Enter the correct minutes (if necessary to update).

7.-
Press "FORWARD/DND" button to advance to the
AM/PM selection.
8.-
Press "MUTE" button to select AM or PM (if necessary to
change).
9.-
Press "STORE" button
10.-
Lift and replace handset to exit the programming mode.
11.-
This will change the time for all of the phones on your
phone
How to set the time on your Panasonic Voice Mail
•Press the intercom button on your phone.
•Dial 165 and then raise the handset.
•When the Voice Mail answers you, dial # 6 (POUND SIX)
•Dial *999 (STAR NINE NINE NINE)
•Enter your password. (usually your zip code) followed by the
# (POUND)
•Wait for the system to say, “To receive the message”
•Then dial 6 (for other features)
•Then dial 3 (to set the clock)
•Then dial 1 (to change the time)
•Enter the time followed by a # (POUND) Example for 9:37
is---Enter 937#
•The system will ask for 1 for AM or 2 for PM
•Enter the correct digit
•The system will ask for 1 to change or 2 to accept
•Enter 2 (to accept)
•Hang up