Panasonic KX-TVA50 Manual

Technical Information
Date: Tuesday October 20th 2009
Documento. TN-KXT-TVA-Notification
Title: KX-TVA50/KX-TVA200 Voicemail System Device Notification
Associated Systems: KX-TVA50, KX-TVA200
Associated Tech Note: None
Application: Program instruction on KX-TVA50/KX-TVA200 Voicemail Message Device Notification
Topics Covered:
•Notification Parameter Options
•Notification Schedule Settings
•Multi Device Notification Timer Settings
1. Notification parameter options and selections
The voicemail system is capable of notifying the mailbox subscriber when a new message is received by
message waiting lamp and/or devices such as telephone (cellular) or beeper.
Note: There is a maximum of 3 devices that can be programmed for notification purposes per mailbox.
Message Waiting Lamp
Enable: Light message waiting lamp when a new message is left.
Disable: No message waiting lamp indication.
Beeper Callback No Entry Mode
Enable: allows caller to enter his/her call back number either before or after leaving a message.
Disable: Leaving call back number is not allowed.
Device Notification for Unreceived Message
YES: Voicemail notifies mailbox subscriber again IF any message left in the mailbox is unchecked.
NO: Voicemail notifies only once on a new message.
PG. 1
Please continue to next page
Panasonic Telephone Systems
www.voicesonic.com
Phone [phone]
KX-TVA50
KX-TVA200

2. Notification Schedule Selection and Settings.
You may have up to 3 devices for message notification purposes in each mailbox.
Each device follows its own notification schedule.
PG. 2
Please continue to next page

To select the devices, click on “click to edit” and bring up the device notification schedule.
You will find the following selection/options under each device
Notification type: Select the message type for notification (all messages or urgent messages only)
Dial number: CO line access code must be entered preceding the device number (91xxx…)
Type of device: either telephone or beeper can be selected.
No. of retries: The number of times the voicemail will try to send notification if the device is busy or no answer.
Busy delay time: The length of time the voicemail will waiting before sending notification again if busy.
No answer delay: The length of time the voicemail will wait before sending notification again if no answer.
Use mode: not used, continuously or within scheduled time only*
*Note regarding use mode:
Not use: The selected device is not used for message notification
Continuously: The device is called whenever a message is recorded in the mailbox.
Scheduled: The device is called only during the selected time.
To select the time frame, Click on a day tab (Sunday – Saturday). Click “time frame 1” or “time frame 2”
You may enter the start and end time in the “start at:” and “end at:” field or drag the edges of the time
frame to mark the start and end times.
PG. 3
Please continue to next page

PG. 4
Please continue to next page

3. Multi Device Notification Timer Settings
The time interval between device notifications can be selected between each device.
Device start delay time: The length of time the voicemail will wait before sending the first notification.
Device interval time between device 1 and next device: the delay time before notify with next device.
Device interval time between device 2 and next device: the delay time before notify with next device.
Device interval time between device 3 and next device: the delay time before notify with next device.
PG. 5
Panasonic Telephone Systems
See More
Panasonic Manuals www.voicesonic.com
Phone [phone]