920101 INCLINE PRESS BENCH ASSEMBLY INSTRUCTIONS
.............~.............................<........................
.....~.~,,..................
~<,<<,,., ~.~.~ ............ . ........... ~..................~.,..~..~.........
~ ~.~.
: :::::~:~:~:~:~::::~::~:::::~:::~:~:~:~$~::~:~:[:~:::~:~:::~::::~:~:~:~::~:....:.-.-.:.:..:.;..-.-.-.-.:......-.-.-:.-.-:.....,-...-......:.......:,-:.:...-:.:-:--.- -...................................’-’.. -:-’.:~::~:.~::~<~<s~,’:~:~?~::~ ~ " ""
~;~:~:.~.~.~.~.~.~.~.~.~.~.~:.~.~.~.~.~.~.~:.~.~.~.~.~.~.~.~.~.~.~:.~:.>~.~.~.~:.~.>>~.~.~.~.~.~.~
~:.:.~::~~::-:~"’.’-::~.:.’.:~".’.’::.’"~...’.-~:~...........
<......~’~.-.’....::..-:~............~...........:~..........::..¯..-:::-,4.............~;:::.............................~...........~.......................~,~-.:~-.:<~>~:.~~:.,~::~
~
.~::~:::::::~:: ~::~::::~::~:~ ~:g~i:~{!:~::
~
~:~:~:~:.~---.-.-.~-.,-.,:.,’.:.~,-.~.~,,..~-...-.~,,,........ ~~..~..,,:.,....~....... ~,~.,-.,:.:::....-~~.~<.~.:~<~:~..~:::~.~.:~’~.¢<,,.¢~<-...-.....~-.-...>~,,>..-...,...<..,,~....~:<..,~¯.,<<~~-.....:..~..........~,.:~.,-...,, >~.<.. ~..
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::=================~=======~~=========~~=~~=~=~~=~=~~=~~=~~:~:~:~:~:::~:~:~:~:~:~:~:~;~:::~:~::~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:~:?~::~:::::~:~:::::::::~:,::::~:::::~:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~::::~.~:.:,s:::.:~,
I
~’’’’’’’’-’’’’’-’’’’"""
""’:’""":":":":-:":":’:::"~":":":"i":"
:<"
:":<’.":’.’.’.."’.’:.".’.".’.’.’.".’.’.".’.’.’.":’.’.’.’.’:."::::.~’.’.’.""."-’.".’.’.’.":.’.’~".’:.’.’.’.’.".’.,’-’-’-’.".y.’~~’.":,""".’:."’."".,’-’.".-.""::.’.’.’:-y.-:-:...:-.....<...::...-:..:.-.-:.-:i’:;"?r?:’:~":;":":":’""":’:’:":’i
~’"
:’::":":":":":":":~~":’:~~~~":~~~$~~]
SECURELYassemble the BENCHFRAMEWELDMENTto the UPRIGHTFRAMEWELDMENT
as shownon drawing.
Attach eight (8) 1-1/2 X 3/4 IN GLIDESto the SLEEVETUBEon the BENCHFRAME
WELDMENTas shown in DETAILB.
SECURELYassemble the SPRINGPIN to the SPRINGPIN HOUSINGof the SLEEVETU]~Eas
shown in DETAILA. ¯.
Insert two (2) 3 X 2 IN ENDCAPS,andone (1) I-3/4 IN SQENDCAPinto the ends or:the
SUPPORTWELDMENTas shown on drawing.
5. SECURELYassemble the SEATPADto the SEATSUPPORTWELDMENTas shown on drawing.
Pull back the SPR~INGPIN on the SLEEVETUBEof the BENCHFRAMEWELDMENTa~.d insert
the SEATSUPPORTWELDMENT.Release the SPRINGPIN into the desired hole.
SECURELYassemble the BACKPADto the UPRIGHTFRAME,and BENCHFRAME
WELDMENTSas shown on drawing.
Part#6626501 Revision: 06/04/96
