ParaBody 895101 User manual

SeriousSteel
895101
DIP ATTACHMENT
ASSEMBLY INSTRUCTIONS
¯THANKYOUfor purchasing the DIP ATTACHMENT!
¯PLEASEread these instructions thoroughly and keep themfor fi~ture reference.
¯TOOLSREQUIRED:Ratchet, 3/4" Socket, 3/4" Wrench, Rubber Mallet or
Hammer.
¯IF youhave any problemin the assemblyor use of this product,’please contact
the PAR~3ODYCustomer Service Department at 1-800-328-9714.
ParaBody, Incorporated
14150 Sunfish Lake Boulevard
Ramsey, MN55303
1-800-328-9714
6600101 103/2~96

THEREIS A RISK ASSUMEDBY INDIVIDUALS WHOUSE THIS TYPE
OF EOUIPMENT. TO MINIMIZE RISK. PLEASE FOLLOWTHESE RULES:
1. Consultyourphysician beforebeginninganyexcercise progrmn
".
2. Inspectequipmentdaily. Tightenall loose connectionsandreplacewarnparts immediately.
Failureto doso mayresult in seriousinjury.
3. Donot allowminorsor childrento play on or aroundthis equipment.
4. Excercisewithcare to avoidinjury.
5. If unsureof properuse of equipment,call yourlocal PamBodydistributor or call the ParaBody
customerservice depa~huentat 1-$00-325-9714.
~ ***PLEASE IDENTIFY ALL PARTS BEFORE BEGINNING ASSEMBLY***
ITEM PART# DESCRIPTION "" OTY
I..........................6589903..............
W’LDMT,DIPHANDLESUPPORTWHT..........................................
I
2..........................6590303..............
WLDMT,DIPHANDLEWHT............................................................
I
HARDWARELIST: ***PLEASE SORTHARDWAREBEFOREBEGINNINGASSEMBLY***
ITEM PART # DESCRIPTION QTY
I..........................
3103101..............
GRIP,I-If4X5CLOSEDEND..........................................................2.
2..........................6405201........... 2.CAP,END2SQ.10-14GA................................................................. 3.
3..........................3102502............. WASI-~R,FLAT1/2ID...................................................................... 4.
4~.£......................3102801.............. NUT,NYLOCK1/2-13.................... ...........~.........................~........~....2. " ..........
5..........................
3102910.............. BOLT,HHG21/2-13X3..................................................................... 2.
6..........................
6145801.............. KNOB,3PRONG3/8-16X3/4........................................................... 1.
7..........................3120801.............. PIN,DETENT.390DIAX4-I/2......................................................... 1.
8.~.g~.~..~..~.~..~.~..~...6600301.............. GLIDE,3.75X3.75tYHMWPEQTY1............................................... 2.
1. Attach two 2" ENqDCAPSto DIP HANDLEas shovm on drawing.
2. Attach one 1-1/4 x 5" GRIP to each HANDLE.
3. Insert one 2" ENDCAPinto end of DIP HANDLESUPPORT.
4. Assemble DIP HANDLEto DIP HANDLESUPPORTusing two 1/2" x 3" bolts, four 1/2"
flat washers and two 1/2" lock nuts as shownon drawing.
5. Attach one GLIDEto inside of each plate as shownin Detail A.
6. Install DIP ATTACHMENTto GUNRACKas shown on drawing. Insert DETENTPIN in
first hole for use on 893 PROSYSTEM,and second hole for use on 866 STRENGTH
BUILDING SYSTEM.
7. Securly tighten 3 PRONGKNOBin threaded hole as shown on drawing.
66(30101 203/22/96

~THEREIIS A RISK ASSUMEDBY INDIVIDUALS WHOUSE THIS TYPE
OF EOUIPMENT. TO MINIMIZE RISK. PLEASE FOLLOWTHESE Rr~ES:
1. Consult your physician before beginningany excercise program
..
’ 2. Inspect .equipmentdaily. Tighten all loose connectionsand replace warnpa~immediately.
Failure llo do so may result in serious injury ....
3. Donot allow minorsor children to play on or aroundthis equipment.
4. Excer¢isewith care to avoid injury.
5. If unsur,~ of proper use of equipment,call yourlocal ParaBodydistributor or call the ParaBody
customer service deparhnent at 1-800-328-9714. ..
PARTSLIST: ***PLEASEIDENTIFYALLPARTSBEFOREBEGINNINGASSEMBLY***
ITEM PART# DESCRIPTION OTY
I..........................65~9903.............. WLDMT,DIPHANDLESUPPORTWHT...........................................
2..........................6590303.............. WLDMT,DIPHANDLEWHT.............................................................
HARDWARELIS’]~ ***PLEASE SORTHARDWAREBEFOREBEGINNINGASSEMBLY***
ITEM PART# DESCRIPTION OTY
1..........................3103101............ ,. GRIP,I-1/4X5CLOSEDEND........................................................... 2.
2..........................6405201.............. CAP,END2SQ.10-14GA.................................................................. 3.
3..........................3102502............. WASHER,FLAT1/2ID.................................................................. ,....4.
4~..~,....................310280I..~........... NUT,NYLOCKi/2-13..~., ............ i.:.,.......~........................................
2.
5..........................
3102910.............. BOLT,HHG21/2-13X3...................................................................... 2.
6..........................
61,45801.............. KNOB,3PRONG3/8-16X3/4..~......................................................... 1.
7..........................
3120801.............. PIN,DETENT.390DIAX4-I/2.......................................................... 1.
8..........................
6600301.............. GLIDE,3.75X3.75UHMWPEQTY1................................................ 2.
1. Attach two 2" ENDCAPSto DIP HANDLEas shown on drawing.
2. Attach one 1-1/4 x 5" GKIPto each HANDLE.
3. Insert one 2" IENDCAPinto end of DIP HANDLESUPPORT.
4. Assemble DIP HANDLEto DIP HANDLESUPPORTusing two 1/2" x 3" bol~s, four 1/2"
flat washers and two 1/2" lock nuts as shownon drawing.
5. Attach one GLIDEto inside of each plate as shownin Detail A.
6. Install DIP ATTACHMENTto GUNRACKas shown on drawing. Insert DETENTPIN in
first hole for use on 893 PROSYSTEM,and second hole for use on 866 STRENGTH
BUILDING SYSTEM.
7. Securly tighten 3 PRONGKNOBin threaded hole as shown on drawing.
6600101 203/22/96

6600 I01 303/22/96