940101 SHOULDERPRESS BENCHASSEMBLYINSTRUCTIONS
illI I
~::~:~;~;~;~;~:.:-:.~...............
::::::::::::::::::::::::::::::::::::::::....:.,..~.;...,::~.:.~......~..~...;,.::~.~.....:.....,.,:.....................~:~...~.;...~:~:~.....-.:.-.-.-.;.-..............:...,-.....~.,:,:.~:.:..:~:::~~::::.:.::~;~::.:~::::::............
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::~:‘~:‘~::::::::::>:~:~:~::~::~::.:~::::~::::~:~>~>>>:~:~:.>>:.>>:::~>:.>>:~::.>:~:~.:.:.::~>...:--...:....... .:::., .~, -,... ..:
, :,~::.:~:.~:~.:~::.:~. ~::. ~: ~. ~. ~::~::~::~::::~ :~:.~::::~::~:-~::: ~:::::-~:-::~: ~.............. ~.:.~ .:.~ ~ .~,::~::~,~::::~:~::~ ~.:.:~.:~~
:::.:~::~-.’."........ :::~..~::.~.:~:~..~.~...~:::~.~.~.:....:~.~....~..:~...:.:.......~.~.~.~...~....~...~.~..~...~.......~.~..~..~.~.~..:~.......~.~.~.~.~.....~:.~......:::::.~:~....~.+~:..~.~+~.....~.~<...~.~"~...~[~..~:~.:~:.~:~>~>.~>:.>::~:~>~>:~:.~:.:.~:.:.~>:.:.::~:.:.:.~:~::~>~::~:~::::~.
:~::::s::::::::...................... .:: ¯ ¯ ......
~~ ........... ~....:.:...:(:~.:~.:,:~.~:::.:::.:..~,:~:::::::::~::::::~::~
.....................
SECURELY assemble the BENCH FRAMEWELDMENTto the UPRIGHT FRAMEWELDMENT
as shownon drawing.
Insert two (2.) 3 X 2 IN ENDCAPSinto the ends of the BENCHSUPPORTTUBE,and SECURELY
assemble it to the BENCHFRAMEWELDMENTas shown on drawing.
Attach eight (8) 1-I/2 X 3/4 IN GLIDESto the SLEEVETUBEon the BENCHFRA~ME
WELDMENTas shown in DETAIL B.
SECUREL~’ assemble the SPRING PIN to the SPRING PIN HOUSING of the SLEEV’E TUBE as
shown in DETAILA.
Insert one (1) 1-3/4 IN SQ ENDCAPinto the end of the SEATSUPPORTWELDMENTas shown
drawing.
6. SECURELYassemble the SEATPADto the SEATSUPPORTWELDMENTas showr, t on drawing.
Pull back the: SPRINGPIN on the SLEEVETUBEof the BENCHFRAMEWELDMENTand insert
the SEATSI[JPPORTWELDMENT.Release the SPRINGPIN into the desired hole.
SECURELYassemble the BACKPAD to the UPRIGHTFRAME, and BENCHFRAME
WELDMEI~ITSas shown on drawing.
Part# 6626601 3Revision:0(;/I0/96
