ParaBody LP5 User manual

LP5 LEG PRESS 5
CLASSH
PART#7357701
REV.B
Version: LP5A-101
Revision: 11/08/02
1
ASSEMBLY INSTRUCTIONS
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Parts List.........................4
NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Assembly Instructions.....5-12
General Maintenance.......13
Warranty Statement.........14
Product Services.............15
Insert-Registration Card
©

Tools Required forAssembly
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure
3
NOTE:BOLTLENGTH IS MEASUREDFROMTHEUNDERSIDEOFTHEHEADOFTHE BOLT.
BOLT LENGTH RULER:
BoltLengthRuler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody LP5 Leg Press. Please read these
instructions thoroughly and keep them for future reference.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.

4
PARTS LIST
PART #
ACU04-1444
ACU04-1447
ACU04-1449
ACU04-1445
ACU04-1446
ACU04-1448
ACU02-1298
ACU07-0135
ACUDA1E03830016NB
KEY
1
2
3
4
5
6
7
8
9
QTY
1
1
1
1
1
1
1
2
6
PART #
ACUDC1250100020B
ACUDB2E03811000B
ACUDA1E02143413NB
ACUDB2E01212000B
ACU11-0080
ACU05-0372
ACU06-0437
ACUDACM04006007YB
DESCRIPTION
3/8”FLATWASHER
3/8”LOCKNUT
1/2X4-3/4” BOLT
1/2”LOCKNUT
SPRINGPINKNOB
3/4X 4” SHAFT
BUMPER,1-1/2X2
SETSCREW,M4X0.7X6L
QTY
8
2
4
4
1
4
2
1
DESCRIPTION
FRAME
SEATADJUST
HANDLE
MAINARM
SECONDARM
FOOTPLATE
PULLEYBRACKET
PAD
3/8X3”BOLT
KEY
10
11
12
13
14
15
16
17
NOTE:Someofthecomponentmaybepre-assembled.

9−1/2"
5
FIGURE 1
STEP 1:
• SECURELY assemble the SECONDARM (5) totheFRAME(1) using one 1/2 X 4-3/4” BOLT(12), one 3/4 X 4” SHAFT(15)
andone1/2” LOCK NUT (13). See FIGURE 1.
0123456
1/2 1/2 1/2 1/2 1/2 1/2
12 1/2X 4-3/4”
1
13
15
4
5
• SECURELYassemble theMAINARM (4) tothe FRAME (1)using one 1/2X 4-3/4” BOLT(12),two3/4” FLANGEBEARINGS(14), one
3/4X 4” SHAFT(15)and one 1/2” LOCK NUT(13).SeeFIGURE 1. (NOTE:MakesureMAINARM isorientatedcorrectly,tophole
shouldbe9-1/2”fromthetopofarmasshowninFIGURE1.)
• NOTE:FollowSTEP1fortheassemblyoftheLEGPRESStotheGS1,GS2,GS4andGS8GymSystems.IfyouhavetheCM3orGS6
GymSystemproceedtoSTEP2.
• Proceed to to STEP 3.
• SECURELYassemble two1-1/2 X 2“ BUMPERS (16)to each sideofthe MAINARM(4)where theMAINARM(4) contacts theFRAME
(1)SeeFIGURE1.
16
Forassemblyto the GS1, GS2, GS4, GS8 Gym Systems .
Make sure MAINARM
is orientated correctly
• NOTE: FLANGEBEARINGSSHOULDBEPRE-INSTALLED

11−1/4"
6
FIGURE 2
STEP 2:
• SECURELY assemble the SECONDARM (5) to the FRAME (1) using one 1/2 X 4-3/4” BOLT (12), one 3/4 X 4” SHAFT(15) and one
1/2”LOCKNUT(13).SeeFIGURE2.
• SECURELY assemble the MAINARM (4) to the FRAME (1) using one 1/2 X 4-3/4” BOLT(12), one 3/4 X 4” SHAFT (15) and one 1/2”
LOCKNUT(13).SeeFIGURE2.(NOTE:MakesureMAINARMisorientatedcorrectly,topholeshouldbe11-1/4”fromthetopofarm
asshowninFIGURE2.)
• NOTE:FollowSTEP2fortheassemblyoftheLEGPRESStotheCM3andGS6GymSystem.IfyouhavetheGS1,GS2,GS4orGS8
GymSystemsproceedtoSTEP3.
• Proceed to to STEP 3.
• SECURELYassemble two 1-1/2X2 BUMPERS (16) to eachside of the MAINARM(4) wherethe MAINARM(4) contactsthe FRAME
(1)SeeFIGURE2.
12 1/2X 4-3/4”
1
13
15
4
5
16
Forassemblytothe CM3andGS6 GymSystem.
Make sure MAINARM
is orientated correctly
• NOTE: FLANGEBEARINGSSHOULDBEPRE-INSTALLED

FIGURE 3
STEP 3:
7
• Insert one 3/4 X 4” SHAFT(15)thru pre-installed FLANGE BEARINGS in the SECONDARM (5) as shown in FIGURE 3.
• Insert one3/4 X 4” SHAFT(15) thru pre-installed FLANGE BEARINGS in theMAINARM (4)as shown in FIGURE 3.
4
5
0123456
1/2 1/2 1/2 1/2 1/2 1/2
15

8
STEP4:
FIGURE 4
• SECURELYassembletheFOOTPLATE(6) tothe SECONDARM(5) and theMAINARM(4)using two 1/2X 4-3/4”BOLTS(12)and two
1/2”LOCKNUTS(13).SeeFIGURE4.
12 1/2 X 4-3/4”
6
5
13
4

9
STEP5:
FIGURE 5
3/8 X 3” 9
1
11
10
3
• SECURELY assemble the HANDLE (3) to the FRAME (1) using two 3/8 X 3” BOLTS (9), four 3/8” FLATWASHERS(10) and two 3/
8”LOCK NUTS(11)as showninFIGURE 5.
0123456
1/2 1/2 1/2 1/2 1/2 1/2

10
STEP6:
FIGURE 6
• CAREFULLEYslide the SEATADJUST (2) into the FRAME (1) as shown.The SEAT can be adjusted by turning the SPRING PIN
KNOB (14) clockwise and pulling. The SEAT can be secured in place by releasing the pin into an adjustment hole and turning
clockwise until tight.
1
2
14
17
• Securely assemble one PLUNGER PIN(14)to the FRAME (1) as shown. (NOTE: ScrewPLUNGERPIN(14)in all the way)
• Securely assemble one M4 SET SCREW (17) to the plunger pin barrel on the FRAME (1) then back off 1/4 turn so PLUNGER PIN (14)
rotates freely until the threads come in contact with the M4 SET SCREW (17)

STEP7:
FIGURE 7
• SECURELYassemble one PAD (8) to the SEATADJUST (2) using two 3/8 X 3” BOLTS (9) and two 3/8” FLATWASHERS (10) as
shownin FIGURE7.
9 3/8 X 3”
10
2
8
11
0123456
1/2 1/2 1/2 1/2 1/2 1/2

12
STEP8:
FIGURE 8
• SECURELYassemble one PAD (8) to the FRAME (1) using two 3/8 X 3” BOLTS (9) and two 3/8” FLATWASHERS (10) as shown in
FIGURE8.
3/8 X 3” 9
1
10
8
ThankyouforpurchasingtheParabodyLP5LEG PRESS. If unsure of proper use of equipment, call your
localParabodydistributor or call the Parabodycustomerservice department at [phone].
• Refer to the LEG PRESS ADAPTOR assembly instructions to attach the LP5 LEG PRESS to the home gym. The PULLEY
BRACKET (7) will be attached at that time.
7

MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
13
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at [phone].
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
Thank you for purchasing the ParaBody LP5 Leg Press.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.
SERIALNUMBERLOCATION

14
NOTES:
LIMITED WARRANTY
ParaBodyextends the following LIMITED WARRANTY to the original owner of the ParaBodyproducts. The Warranty terms apply to IN HOMEUSE ONLY.
1. LIMITEDWARRANTYON FRAMEAND WELDS. Ifthe frame of the ParaBodyproduct ora weld should crack orbreak, itwill be repaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
2. LIMITEDWARRANTYON PARTS. Ifthefollowingpartsaredefectivein material orworkmanship, ParaBody willsupply replacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
3. LIMITED WARRANTY ON CABLESAND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONSAND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty.
5. REPLACEMENTAND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsiblefor all othercosts. Such costs mayinclude, but are not limitedto: a. labor chargesfor service, removal, repair orreinstallation
oftheParaBody product or anycomponent part; b. shipping, delivery,handlingand administrative charges forreturning partstoParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. If shipping bythe Owners isdeemed necessary (insole discretion ofParaBody), partsshouldbe shipped intheir originalcarton
orequivalent packaging, fullyinsured withshipping charges prepaid. ParaBodywill not assume any responsibilityfor any loss or damage
incurredin shipping.
7. CLAIMPROCEDURES. If service on your ParaBody product isrequired duringthe warrantyperiod, please contact our Customer Service
Departmentat1-800-328-9714forinstructionsregardingreturningorreplacingparts. Pleasehaveavailable the following information: (i)the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawingincluded withyour assemblyinstruction); (iv)a descriptionof thenature ofthe problem.
8. OWNER’SRIGHT. This LimitedWarranty givesyouspecific legal rights. You mayalsohave other rights,whichvarydependingon local law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description inthis Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.
10. DISCLAIMER. No otherexpress warranty has been made or will be made on behalf of ParaBody with respect to any ParaBody product or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody
product,inconvenience, loss or damage to personal property, whetherdirect or indirect, and incidentalor consequential damages, so the
above limitation or exclusion may not apply to you.

INTERNATIONALOFFICES
LifeFitnessAtlanticBV
AtlanticHeadquarters
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: [phone]
Fax:[phone]
Life Fitness (UK) Ltd.
QueenAdelaide
Ely, Cambs CB7 4UB
United Kingdom
Phone CSS: [phone]
Fax CSS: [phone]
Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
LIFE FITNESS
14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A.
Tel: [phone] Fax: [phone]
800.328.9714 (Toll-free within the U.S. and Canada)
www.parabody.com
15
LifeFitnessEUROPE GmbH
Siemensstrasse 3
85716Unterschleissheim
Germany
Phone: [phone]
Fax: [phone]
Life Fitness Italia S.R.L.
Via Elvas 92
39042Bressanone
Italy
Phone: [phone]
Fax: [phone]
Life FitnessAsia Pacific Limited
Room 2610, Miramar Tower
132 Nathan Road, Tsimshatsui
Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]
Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3ºandar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone:[phone]
Fax:[phone]