ParaBody 829 User manual

1CLASSH
PART # 7078201
REV. B Revision: 06/26/01
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
829 LEG CURL/EXTENSION
Version: 829107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Gym Layout.....................4
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................5
Assembly Instructions.....5-8
General Maintenance.......9
Warranty Statement..........10
Product Services..............11
Insert-Registration Card
©

IMPORTANT NOTES
Please note:
Tools Required forAssembly
* Thank you for purchasing the ParaBody 829 LEG CURL/EXTENSION. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
3
NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure

1 Square = 1’ X 1’
4
1’ 2’ 3’ 4’ 5’
1’
5’
4’
3’
2’
6’

PARTS LIST
DESCRIPTION
FRONTSUPPORTTUBE
BACK PADADJUSTTUBE
BACK PAD SUPPORTTUBE
1-3/4 SQ X 5" TUBE
1-3/4 SQ X 13-1/2" TUBE
LEG CURL/EXTENSION
BACKPADASSY
SEATPADASSY
LEGEXT HANDLE RHT
LEGEXTHANDLELFT
LEG FRAME
REARBASELEG
3/4 X 16" TUBE
3/4 X 17" TUBE
4 X 7" ROLLER PAD
1/8 X 2 X 8" PLATE
3/8” DIA SPRING PIN
1/2" DIA SPRING PIN
3/8 X 1" BOLT
KEY
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
PART #
3102904
3102906
3102917
3202102
3102501
3102802
3102804
3102807
6405201
6692601
3102416
6406401
3104301
6416601
6020601
3105401
3103101
6467001
DESCRIPTION
3/8 X 3" BOLT
3/8 X 4" BOLT
1/2 X 4" BOLT
1/2 X 7" BOLT
3/8"FLATWASHER
3/8" NYLOCK NUT
1/2" LOW HT. NYLOCK NUT
3/8" LOW HT. NYLOCK NUT
2" SQ END CAP
3 X 2" END CAP
2 X 1" END CAP
HINGETAB
3/4" SQ RUBBER BUMPER
1-1/2 X 3/4" GLIDE (QTY 8)
1/2"FLANGEBEARING
STARLOCK COLLAR
1-1/4 X 5" GRIP
PARABODYLOGO END CAP
QTY
8
2
1
1
20
4
2
2
3
2
4
2
1
2
2
6
4
4
LEG CURLLEG EXTENSION
PART #
6259108
6625402
6625502
6216702
6668202
6662002
6661221
6661621
6662208
6662308
6668508
6668808
6125101
6549301
6194601
6628302
6412001
6466901
3102909
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
QTY
1
1
1
1
1
1
1
1
1
1
1
1
2
1
6
1
2
1
4
5

6
Insert four PARABODY LOGO END
CAPS(37) into the ends of REAR BASE
LEG (12) and FRONT BASE SUPPORT
(1). See FIGURE 1.
STEP 1:
Securelyassemble REAR BASE LEG (12)
to LEG FRAME (11) using two 3/8 X 3”
BOLTS (20), four 3/8” FLAT WASHERS
(24), and two 3/8” NYLOCK NUTS (25).
See FIGURE 2.
STEP 3:
Securely assemble FRONT BASE SUP-
PORT (1) to LEG FRAME (11) using two
3/8 X 3” BOLTS (20), four 3/8” FLAT
WASHERS (24), and two 3/8” NYLOCK
NUTS (25). See FIGURE 3.
STEP 4:
Slide two 1-1/4 X 5" GRIPS (36) over
RIGHT LEG EXT HANDLE (9) & LEFT
LEGEXTHANDLE (10). See FIGURE 4.
STEP 5:
FIGURE 1
37 12
36
37
1
12
2425
24
11
FIGURE 2
24
3/8 X 3” 20
24
25
11
1
FIGURE 3
FIGURE 4
9
36
10
&
Slidetwo 1-1/4 x 5” GRIPS(36) overtubes
on REAR BASE LEG (12). See FIGURE
1.
STEP 2:
20 3/8 X 3”

7
SecurelyassembleRIGHT(9)&LEFT(10)
LEGEXTHANDLEStoLEGFRAME(11)
usingtwo 3/8 X 4”BOLTS (21), four 3/8”
FLATWASHERS(24),andtwo3/8”LOW
HEIGHTNYLOCKNUTS(27).SeeFIG-
URE5.
STEP 6:
FIGURE 5
11
10
27 LOW HEIGHT
9
29
29
24
Insert two 3 X 2” END CAPS (29) into
the leg frame as shown in FIGURE 5.
STEP 7:
FIGURE 6
2
3
30
FIGURE 7
Securely assemble one 1/2” SPRING PIN AS-
SEMBLY(18) into the spring pin barrel on the
LEG FRAME (11) as shown in FIGURE 6.
STEP 8:
Insert four 2 X 1” END CAPS (30) into the ends
of the BACK PAD ADJUST TUBE (2) & BACK
PAD SUPPORT TUBE (3). See FIGURE 7.
STEP 9:
21 3/8 X 4”
0123456
1/2 1/2 1/2 1/2 1/2 1/2
24
18
11

26
11
3
2
Securely assemble BACK PAD ADJUST
TUBE (2) & BACK PAD SUPPORT TUBE
(3) to LEG FRAME (11) using one 1/2 X 7”
BOLT (23) and one 1/2” LOW HEIGHT
NYLOCK NUT (26). (NOTE: SECURELY
TIGHTENBOLTTHENBACKNUTOFF
1/4TURNTOALLOWTHETWOPARTS
TO ROTATE FREELY.) See FIGURE 8.
STEP 10:
Securely attach the BACK PAD (7)
to the BACK PAD TUBES (2 & 3)
using four 3/8 X 3” BOLTS (20)
and four 3/8” FLAT WASHERS
(24). See FIGURE 9.
STEP 11:
FIGURE 8
FIGURE 9
24
2
3
7 20 3/8 X 3”
Securely fasten 2 X 8” PLATE (16) to bottom of SEAT
PAD (8) using two 3/8 X 1” BOLTS (19) and two 3/8”
FLAT WASHERS (24). See FIGURE 10.
STEP 12:
FIGURE 10
8
23 1/2 X 7”
8
19 3/8 X 1”
16
24

Slide two HINGE TABS (31) over posts on
LEG FRAME (11). See FIGURE 11.
STEP 13:
31
31
FIGURE 12
FIGURE 13
Securely attach the SEAT PAD (8) to the
HINGE TABS (31) using two 3/8 X 1”
BOLTS(19)andtwo3/8”FLATWASH-
ERS (24). See FIGURE 12.
STEP 14:
8
19 3/8 X 1”
24
31
14
35
9
Attach two ROLLER PADS (15) to the
LEG FRAME (11) using one 17” ROLLER
PAD SHAFT (14) and two STARLOCK
COLLARS (35). See FIGURE 13.
STEP 15:
FIGURE 11
0123456
1/2 1/2 1/2 1/2 1/2 1/2
35
15
15
11
11

FIGURE 16
33
Securely assemble two 3/8” SPRING PIN AS-
SEMBLIES (17) into the spring pin barrels on
the LEG CURL/EXTENSION (6) as shown in
FIGURE 15.
FIGURE 15
FIGURE 14
STEP 17:
4 5
6
17
28
5
28
4
28
17
Insert 5” & 13-1/2” ROLLER PAD
ADJUSTERS (4 & 5) in the ends of the
LEG CURL/EXTENSION (6). Pull back
on SPRING PINS until ROLLER PAD
ADJUSTERS (4 & 5) lock in place. See
FIGURE 16.
STEP 18:
Attach eight 1-1/2” X 3/4” GLIDES (33) to 5”
ROLLER PAD ADJUSTER (4) and attach eight
1-1/2” X 3/4” GLIDES (33) to 13-1/2” ROLLER
PAD ADJUSTER (5) as shown in FIGURE 14.
STEP 16:
6
Insertthree 2” SQUARE END CAPS (28)
into the ends of the LEG CURL/EXTEN-
SION (6). See FIGURE 16.
STEP 19:
10

Insert two 1/2” FLANGE BEARINGS
(34)into the LEG CURL/EXTENSION
(6). See FIGURE 17.
STEP 20:
11
Attach one 3/4” SQUARE RUBBER
BUMPER(32) between thecontactpoint
ofthe LEG CURL/EXTENSION (6)and
the LEG FRAME (11).See FIGURE 17.
STEP 22:
6
11
34
32 22 1/2 X 4”
Securely assemble LEG CURL/EX-
TENSION (6) to LEG FRAME (11)
using one 1/2 X 4” BOLT (22) and one
1/2” LOW HEIGHT NYLOCK NUT
(26). (NOTE: SECURELY TIGHT-
EN BOLT THEN BACK NUT OFF
1/4 TURN TO ALLOW THE PART
TO ROTATE FREELY.) See FIG-
URE 17
STEP 21:
FIGURE 17
26 LOW HEIGHT
STEP 23:Attach four ROLLER PADS (15) to the LEG CURL/EXTENSION (6) using two 16”
ROLLER PAD SHAFTS (13) and four STARLOCK COLLARS (35). See FIGURE 18.
FIGURE 18
35
15
13
6
THISCONCLUDESTHEASSEMBLY
OF THE PARABODY 829
LEG CURL/EXTENSION
0123456
1/2 1/2 1/2 1/2 1/2 1/2

MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
12
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at [phone].
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
Thank you for purchasing the ParaBody 829 LEGCURL/EXTENSION.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILLOUT YOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.

13
NOTES:
LIMITED WARRANTY
ParaBodyextends the followingLIMITED WARRANTYto theoriginal owner of the ParaBody products.The Warrantyterms apply toIN HOME USEONLY.
1. LIMITEDWARRANTYON FRAMEANDWELDS. If theframe ofthe ParaBodyproduct ora weldshould crackor break,it willbe repaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
2. LIMITED WARRANTYON PARTS. Ifthefollowing partsare defectivein material orworkmanship, ParaBodywill supplyreplacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONSAND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty.
5. REPLACEMENTAND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsiblefor allother costs. Such costs may include,but arenot limitedto: a. laborcharges for service, removal, repair or reinstallation
ofthe ParaBody productor any componentpart; b.shipping,delivery, handlingand administrative chargesfor returning partsto ParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. Ifshippingby theOwners isdeemed necessary (insole discretionof ParaBody),partsshould beshipped intheir originalcarton
orequivalent packaging,fully insuredwith shippingcharges prepaid. ParaBody will not assume any responsibilityfor anyloss ordamage
incurredin shipping.
7. CLAIMPROCEDURES. If serviceon your ParaBody product is required during the warrantyperiod, pleasecontact ourCustomer Service
Departmentat1-800-328-9714for instructions regardingreturningorreplacingparts. Please have availablethefollowinginformation: (i) the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawingincluded with your assembly instruction);(iv) adescription of the nature ofthe problem.
8. OWNER’S RIGHT. This LimitedWarrantygives youspecificlegal rights. You may alsohave other rights,whichvary dependingon local law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description inthis Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.
10. DISCLAIMER. No otherexpress warranty has been made or willbe madeon behalfof ParaBody with respect toany ParaBodyproduct or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody
product,inconvenience, lossor damageto personal property, whether direct or indirect,and incidentalor consequentialdamages, so the
above limitation or exclusion may not apply to you.

INTERNATIONALOFFICES
LifeFitnessAtlanticBV
AtlanticHeadquarters
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: [phone]
Fax:[phone]
Life Fitness (UK) Ltd.
QueenAdelaide
Ely,Cambs CB7 4UB
United Kingdom
Phone CSS: [phone]
Fax CSS: [phone]
Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992LBBarendrecht
The Netherlands
Phone: [phone]
Fax: [phone]
LIFE FITNESS
14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A.
Tel: [phone] Fax: [phone]
800.328.9714 (Toll-free within the U.S. and Canada)
www.parabody.com
14
LifeFitnessEUROPEGmbH
Siemensstrasse 3
85716Unterschleissheim
Germany
Phone: [phone]
Fax: [phone]
Life Fitness Italia S.R.L.
Via Elvas 92
39042Bressanone
Italy
Phone: [phone]
Fax: [phone]
Life FitnessAsia Pacific Limited
Room 2610, MiramarTower
132 Nathan Road,Tsimshatsui
Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]
Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3ºandar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone:[phone]
Fax:[phone]