Paradox TM40 User manual

TM40 User Guide - Digiplex EVO Systems

Main Screen
Menu
Outside/Inside temperature
Date/Time
Arm/Disarm Panic
Zones
Info
OneScreen Monitoring SpotOn Locator
Slide Show

Arming/Disarming your System
Arming/Disarming your system:
1. Press Arm/Disarm button
from main screen.
2. Select Arming method.
3. Enter code (4 to 6 digits).

Menu
For menu options press the Menu
button and follow the on-screen
prompts. Menu options include:
• Security Functions
• User Codes
• Control Devices
• Add-on
• System Settings
• Personalize
• Advanced
Arming/Disarming your System

Entering User Programming
Enter user programming:
1. Press Menu.
2. Press User Codes.
3. Enter Master Code.

Programming a New User
Programming a new user:
1. Press the Add button to add a user.
2. Modify Label or press Skip.
3. Enter new user code and press Next.
4. Confirm user code by entering a
2nd time then press Next.
5. Option to learn remote in, press
button on remote or press Skip.
6. Enter access card number
or press Skip.
7. User Settings or press Done.
8. User is now valid.
Entering User Programming

Settings Screen
Setting screen accessed through
Menu then System Settings.
Settings include:
• Time & Date
• Display Setting
• Clean Screen
• Volume/Mute
• Permissions

OneScreen Monitoring™
To Access OneScreen Monitoring*:
1. Press the button.
2. View open/closed zones (an open door
means a zone is open).
3. Press on the Settings button (top
right corner) to access more options.
*OneScreen Monitoring is an optional feature.
Please contact your installer for more information.
Settings Screen

SpotOn Alarm Locator™
To Access SpotOn Locator*:
1. Press the button.
2. Follow the onscreen instructions on
how to upload photos, images, or
schematics for your personalized
floor plans.
3. Follow the onscreen instructions on
how to add/move/delete zones from
your floor plan.
*SpotOn Locator is an optional feature. Please
contact your installer for more information.

SlideShow
To Access SlideShow:
1. Press the button to view the
default slideshow.
2. Press on Menu, Personalize then
SlideShow to access more options.

0
microSD Card
To remove/replace the microSD:
1. Push down on the microSD card to unlock.
2. Gently pull out the microSD card to remove.
If desired, replace card.

Notes

Notes

Warranty: For complete warranty information on this product, please refer to the Limited Warranty Statement found on the Web site www.paradox.com/
terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions. One or more of the following US patents may apply:
7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, and RE39406 and other pending patents may apply. Canadian and international
patents may also apply. © 2013 Paradox Ltd. All rights reserved. Specifications may change without prior notice. www.paradox.com

TM40E-EU01
Printed in Canada 02/2013