Paradox TM40 User manual

TM40 User Guide - Magellan and Spectra SP Systems

Main Screen Outside/Inside temperature
System Status
Zones Panic
Info Menu
Slide Show
Date/Time
OneScreen Monitoring
SpotOn Locator

Arming/Disarming your System
Arming/Disarming your system:
1. Select arming method by
pressing corresponding button
from main screen.
2. Enter code (4 to 6 digits).

Menu
For menu options press the Menu
button and follow the on-screen
prompts. Menu options include:
• Bypass Zones
• PGMs
• Alarm Clock
• Zone Chiming
• Clean Screen
• Add-on
• Settings
• System Setup
Arming/Disarming your System

Entering User Programming
Enter user programming:
1. Press Menu.
2. Press System Setup.
3. Enter Master Code.
4. From the Master Programming
menu press Users.

Programming a New User
Programming a new user:
1. Press the Add button
to add a user.
2. Enter new user code and press
the Save button.
3. Confirm user code by entering a
2nd time then press Save.
4. Option to learn remote in, press
button on remote or press Skip.
5. User is now valid.
Entering User Programming

Settings Screen
Setting screen accessed through
Menu then Settings.
Settings include:
• Display Settings
• Sound
• Slide show
• Home Page
• Language
• Update Firmware
• Calibrate Sensor
• Product Info

OneScreen Monitoring™Settings Screen
To Access OneScreen Monitoring*:
1. Press the button.
2. View open/closed zones (an open door
means a zone is open).
3. Press on the Settings button (top
right corner) to access more options.
*OneScreen Monitoring is an optional feature.
Please contact your installer for more information.

SpotOn Locator™
To Access SpotOn Locator*:
1. Press the button.
2. Follow the onscreen instructions on
how to upload your personalized
floor plans.
3. Follow the onscreen instructions on
how to add/move/delete zones from
your floor plan.
*SpotOn Locator is an optional feature. Please
contact your installer for more information.

SlideShow
To Access SlideShow:
1. Press the button to view the
default slideshow.
2. Press on Menu, Settings then
SlideShow to access more options.

0
microSD Card
To remove/replace the microSD:
1. Push down on the microSD card to unlock.
2. Gently pull out the microSD card to remove.
If desired, replace card.

Notes

Notes

Warranty: For complete warranty information on this product, please refer to the Limited Warranty Statement found on the Web site www.paradox.com/
terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions. One or more of the following US patents may apply:
7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, and RE39406 and other pending patents may apply. Canadian and international
patents may also apply. © 2013 Paradox Ltd. All rights reserved. Specifications may change without prior notice. www.paradox.com

TM40M-EU00
Printed in Canada 01/2013