Paradyne HotWire 7915 Instruction Manual

TM
1
7915-A2-GK40-00 September 1997
HotWire 7915 E1 SDSL Standalone Termination Unit
Erratum
Document Number 7915-A2-GK40-00
September 1997
The first HotWire 7915 E1 SDSL Standalone Termination Units have an invalid label on the back panel.
The connector labeled DS1 is actually a 120-Ohm E1 interface. The correct labeling is shown below.
DSL E1/2048 Kb/S
48 VDC
120 OHM
97-15704
G.703-Compatible (120-Ohm Interface) HotWire 7915 – Rear Panel

*7915–A2–GK40–00*