PPHA 20-Li B2 GB│CY │ 1■
Contents
Introduction............................................................2
Intended use........................................................................2
Features ...........................................................................2
Package contents ....................................................................2
Technical details .....................................................................3
General power toolsafety warnings .......................................4
1. Work area safety..................................................................4
2.Electricalsafety...................................................................4
3. Personal safety....................................................................4
4. Power tool use and care ............................................................5
5. Use and handling of the cordless electrical power tool.....................................5
6.Service..........................................................................6
Appliance-specific safety instructions for power planers ......................................6
Safety guidelines for battery chargers ....................................................7
Original accessories/attachments .......................................................7
Before use ............................................................. 7
Charging the battery pack (see fig. I) ....................................................7
Inserting/removing the battery pack .....................................................8
Checking the battery charge level .......................................................8
Using the appliance ..................................................... 8
Switching on/off.....................................................................8
Setting the cut depth..................................................................8
Vacuuming dust/chips (see fig. A) .......................................................8
Parking shoe (see fig. B)...............................................................9
Planing............................................................................9
Chamfering edges ...................................................................9
Fitting the rip fence (not supplied, seefig.G) ................................................ 9
Removing/fitting the planing blade (seefigs.C–D) .......................................9
Replacing the drive belt (see fig. F) .....................................................10
Maintenance and cleaning...............................................10
Disposal..............................................................11
Kompernass Handels GmbH warranty ....................................12
Service...............................................................13
Importer .............................................................13
Original declaration of conformity ........................................14
Ordering a replacement battery..........................................15
Telephone ordering .................................................................15
