Parrot CK 3000 Evolution User manual

User's Guide
Guide de l'utilisateur
Guía del usuario
Guida per l'utente
Handleiding
Manual do utilizador
English Français Español
Italiano Nederlands Português

www.parrot.com.tr
www.parrot.com.tr

English
Français
Español
Italiano
Nederlands
Português
5
15
25
35
47
59

Warning :
The manufacturer Parrot S.A. and its affiliates should not be held liable towards End-Users or third parties for prejudice caused by misuasage of the product, nor for usage that would be in violation of local traffic regulations and laws.
Disclaimer :
The information in this document is subject to change without notice and does not represent a commitment on the part of vendor. No warranty or representation, either expressed or implied, is made with respect of quality, accuracy or fitness for any particular purpose of this document. The
associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if
advised of the possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any forme, by any means or for any purpose without express written consent. Product names appearing in
this document are mentioned for identification purposes only. All trademarks, product names appearing in this document are registred property of their respective owners.
FCC Compliance Statement :
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions :
1- This device may not cause harmful interference.
2- This device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity:
We, Parrot S.A. of 174 Quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, Parrot EVOLUTION, to which this declaration relates is in conformity with appropriate standards EN300328, EN301489-17, EN 60950 following the provision of Radio
Equipment and Telecommunication Equipment directive 1995/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.
Bluetooth:
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by Parrot S.A is under license. Other trademarks and trade names are those of their respective owners.

English
User’s guide
English
FrançaisEspañolItalianoNederlands
Português

User's guide
6CK3000 EVOLUTION
INTRODUCTION
The CK3000 EVOLUTION Car Kit allows you to use your
mobile phone in the car with the highest level of comfort and
the greatest possible safety.
 The voice help feature and the voice recognition capability
enable you to use your phone without taking your hands off
the wheel.
 Your conversation is amplified through the vehicle’s speak-
ers.
The CK3000 EVOLUTION offers you the following features:
 Wireless radio connection with your mobile phone
 Full duplex hands-free conversations with echo cancellation
 Background noise reduction
 Voice recognition (up to 150 names) *
 Automatic muting of the car stereo and connection to your
vehicle’s speakers
 Registering of up to three mobile phones
Kit Contents
 Keypad
 Power supply cable
 Electronic control unit
 Microphone
 Mute cable
 User guide
* Feature only available with certain mobile phones.

User's guide
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
7
Electronic control unit:
Do not install the control unit near the vehicle’s
heater or air conditioning unit.
Protect the unit from direct exposure to sunlight.
Avoid enclosing the unit inside the vehicle’s
metal wings or panels, which could affect the
quality of the Bluetooth® link.
Microphone:
The microphone must be pointed towards the
driver and preferably fitted between the sun visor
and the rear-view mirror.
Keypad:
You are advised to fit the keypad
where it can easily be reached,
preferably on a flat surface that has
first been cleaned.
Connect the mute cable to the
connector provided on the keypad.
Ensure that the red and green LEDs light
up and switch off according to the position
of the key in the ignition.
FITTING
If your CK3000 EVOLUTION is installed by a professional, skip
directly to the next chapter, entitled «Getting Started».
The CK3000 EVOLUTION comprises an electronic control unit,
a microphone, a 2-key remote control and two ISO connector
plugs for the car stereo.
CAUTION
Connecting the mute cable and power supply
cable:
The mute cable is fitted with black ISO
connectors.
The power supply cable is fitted with grey ISO
connectors.
Car stereo with ISO plugs:
Disconnect the car stereo’s audio and power
leads.
Join the female connectors of the mute cable
and power supply cable to the car stereo.
Join the vehicle’s audio and power cables to the
male connectors.

User's guide
8CK3000 EVOLUTION
CAUTION
- The red wire of the power cable must be
connected to the constant 12V supply, the orange
wire to the ignition 12V and the black wire to earth.
- Check the wiring diagram of the car stereo’s ISO
power connector plug.
- On some vehicles, the positions of the red and
orange wires may need to be reversed.
This can easily be done by reversing the fuse
holders.
- Do not connect the orange wire to the constant
12V supply, as you could run down the vehicle’s
battery.
If the car stereo features a mute jack, connect the yellow wire
of the mute cable to one of the «Mute in» jacks (1, 2 or 3).
Refer to your car stereo’s manual to determine the position of
the mute jack.
Car stereo without an ISO plug:
You can use a specific adapter for the vehicle (not supplied)
If you do not have an adapter, connect each wire in turn if your
vehicle does not have ISO connector plugs.
If the car stereo has a mute jack, connect using the yellow
wire of the mute cable.
CABLE DIAGRAM CONNECTION

User's guide
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
9
GETTING STARTED
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 If you are happy with the language, you can exit the menu
by pressing the red button or go to the next menu by turning
the scroll wheel.
 If you wish to change the language, access the menu by
clicking the central button or green button.
 When you turn the scroll wheel, the kit announces the lan-
guages available (English, French, German, Spanish, Italian,
and so on).
 When you hear the required language, confirm by clicking
the central button or green button.
 You will hear a confirmation message.
Choosing the Language When Using for the First Time
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 Turn the scroll wheel until the kit says «VOLUME».
 A beep enables you to determine the current volume level.
 To increase or decrease the volume, access the menu by
clicking the central button or green button.
 Turn the scroll wheel towards the right to increase the vol-
ume or towards the left to decrease the volume. When you are
happy with the level, confirm by clicking the central button or
green button.
 You will hear a confirmation beep.
Adjusting the Volume When Using for the First Time
The first time that you switch the kit on, you must pair your
mobile phone with the hands-free kit.
 Enable the Bluetooth mode on your mobile phone.
 Search for any peripherals.
 Once detected, «Parrot EVOL» is displayed on your phone.
 Select it.
 Enter the link code (1234) when prompted by your phone
and then confirm. The CK3000 EVOLUTION connects to your
phone and says «pairing successful».
All the menus are now available when you click the central
button and their name is announced by the hands-free kit
when you turn the scroll wheel. You are now connected to the
hands-free kit and can use it to make and receive calls.
Pairing
For further information, refer to the chapter
entitled «Pairing» in your mobile phone’s user
guide or check out the www.parrot.biz website
http://www.parrot.biz/guide_chm/evolution/index.
html
On the left of the screen, click on the «Bluetooth®
phones» heading. By choosing the required
mobile, you can access all the configuration
procedures.

User's guide
10 CK3000 EVOLUTION
Making a call manually:
 Dial the number using the phone’s keypad.
 The conversation automatically switches to hands-free
mode. Otherwise, press the kit’s green button.
Receiving a call:
 Press the kit’s green button or say «PHONE» (refer to the
chapter entitled «Magic Words») to receive the call.
 Press the red button on the hands-free kit or say «HANG
UP» (refer to the chapter entitled «Magic Words») if you wish
to reject the call.
Ending a call:
 Press the red button on the hands-free kit or say «HANG
UP» to end the call.
Voicemail:
You can access your voicemail functions from the hands-free
kit.
 Dial up your voicemail.
 When you hear the messages, click the central scroll wheel.
The kit says «0».
 Then turn the scroll wheel until you hear the required
number (1, 2, 3, etc.).
 Confirm by pressing the scroll wheel.
Making and Receiving Calls Redial function*:
 Hold down (long click: +2 sec) the green key on the hands-
free kit to redial the last number dialled. The kit says «Redial».
Volume during calls:
 During the call, adjust the volume by turning the central
scroll wheel.
Making a call via voice recognition *:
 Press the green button or say «PHONE» if the magic words
are activated (refer to the chapter entitled «Magic Words»).
 Wait until you hear the beep.
 Say the name of the person that you wish to call. You must
have first recorded the voiceprints on your phone or kit (refer
to the chapter entitled «Adding Voiceprints»).
 If several numbers are associated with the name, say
«Home», «Work» or «Mobile» after the second beep.
Discreet mode:
 During a call, if you wish to switch your call over to your
mobile, press the green button. The kit says «DISCREET
MODE».
 Press the green button again to switch back to hands-free
mode.
* This function is only available on certain phones.

User's guide
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
11
“French”
“English”
“Italiano”
“Spanish”
“Portuguese”
“Dutch”
To access the kit’s menus:
 Click the central button.
 The kit says «LANGUAGE» and then the name of the
current language.
 When you turn the central scroll wheel, the kit says the
different menus.
 You can exit the menus by pressing the red button on the
keypad or by not pressing anything for more than 15 seconds.
 Click the central scroll wheel - the kit says «LANGUAGE»
and then the name of the current language.
 If you are happy with the language, you can exit the menu
by pressing the red button or go to the next menu by turning
the scroll wheel.
 If you wish to change the language, access the menu by
clicking the central button or green button.
 When you turn the scroll wheel, the kit announces the
languages available (English, French, Spanish, Italiano, Dutch,
Portuguese)
 When you hear the required language, confirm by clicking
the central button or green button.
 You will hear a confirmation message.
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 Turn the scroll wheel until the kit says «VOLUME».
 A beep enables you to determine the current volume level.
 To increase or decrease the volume, access the menu by
clicking the central button or green button.
Changing the Language
ACCESSING THE MENUS
Adjusting the Volume

User's guide
12 CK3000 EVOLUTION
 Turn the scroll wheel towards the right to increase the
volume or towards the left to decrease the volume. When you
are happy with the level, confirm by clicking the central button
or green button.
 You will hear a confirmation beep.
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 Turn the scroll wheel until the kit says «ADD
VOICEPRINTS».
 Access the menu by clicking the central button or green
button.
 The kit disconnects from the phone and is now ready to
receive your contact names.
To send a contact name, refer to your phone’s user guide
or connect to the www.parrot.biz website for details on the
procedure for your phone.
As soon as the kit receives a contact, it gives you the
instructions to be followed.
Adding Voiceprints *
Magic words are used to accept an incoming call or end a call,
as well as activate the voice recognition feature without taking
your hands off the wheel.
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 Turn the scroll wheel until the kit says «MAGIC WORDS»
and the current status («ACTIVATED» or «DEACTIVATED»).
 If you are happy with the status, you can go to the next
menu by turning the scroll wheel or exit the menu by clicking
the red button.
 If you wish to change the status, click the central button or
green button. The status changes. It changes from «activated»
to «deactivated» or vice-versa. The kit announces the new
status.
 If you choose to activate the magic words but have not
yet recorded the words «PHONE» and/or «HANG UP», the
kit automatically switches to record mode. The kit guides you
through the process for recording the magic words.
 Once the magic words have been successfully recorded,
they will be activated.
 Click the central button - the kit says «LANGUAGE» and
then the name of the language currently used by the kit.
 Turn the scroll wheel until the kit says «RECORD
KEYWORDS». Confirm by clicking the central button or green
button.
 The kit says «RECORD ALL KEYWORDS».
 If you do not wish to record all the keywords, turn the scroll
wheel to access the required keyword.
Magic Words
* This function is only available on certain phones.
Recording Keywords Phone - Hang Up - Home* - Mobile* - Work*
Connect to our www.parrot.biz website or go straight
to the http://www.parrot.biz/guide_chm/evolution/
index.html
On the left of the screen, click on the «Bluetooth
phones» heading: by choosing the required phone,
you can access all the configuration procedures.
* These words are only available on certain phones.

User's guide
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
13
Volume :
This function adjusts the volume of CK3000 EVOLUTION.
Click Yes and adjust using or Press «Yes» to confirm.
Auto answer :
This function enables or disables automatic answering of
incoming calls. Click «Yes», and then select «Enable» or
«Disable».
User :
When several telephones are connected to CK3000
EVOLUTION, this function identifies the telephone with priority.
The phone with the highest priority is the first phone to which
the kit tries to connect to.
Click Yes, «Main user?» is displayed, confirm.
Caller ID :
This function lets you know the identity of the caller. With this
function enabled, when you receive a call, the name of the
person calling you is pronounced if it is already stored in your
phone book and corresponding voice tag is assigned.
Click Yes and select «Enable» or «Disable».
Multi-Tel :
This function is available for Ericsson and Sony Ericsson
phones equipped only with the «Headset» profile. The affected
phones are Ericsson R520, T39, T68m and the first Sony
Ericsson T68i phones (software version lower than R2E). This
option allows the simultaneous use of these different phones
during a single session of use.
The first phone getting connected to the CK3000 EVOLUTION
is the main phone for the use session of the car-kit (until
extinction).
In the phone Menu go to «Extras» for T39/T39m/R520m, or
«Connect» for T68/T68m/T68i/T606/T608/T610/T616/T618/
T630/Z600/Z608.
Press until «Accessories» and press on «Yes».
«Parrot Menu» is displayed, click «Yes»; menu headings are
displayed.
To learn and relearn a name :
Highlight the desired name and press «Yes» to confirm.
Search :
Allows you to look for a name by its first letter(s). To do this,
type a letter and confirm by pressing «Yes».
 If one or more keywords have already been recorded, the
kit selects the first keyword not to have been recorded.
 Press the central button or green button to start recording.
Follow the instructions given by the kit.
 When a keyword has been successfully recorded, the kit
automatically moves to the next keyword.
 When all keywords have been recorded correctly, the kit
automatically activates them.
 You can exit the menu at any time by pressing the red
button and record or re-record the keywords at a later stage.
* These words are only available on certain phones.
Phonebook
SPECIAL MENU ERICSSON
& SONY ERICSSON
The Main Menu consists of the following 4 sections:
«Phonebook», «Parameters», «Keywords» and «Reset
memory». You can access the menu items by selecting
the desired menu item using the key and confirm by
.«pressing «Yes
Parameters

User's guide
14
Pers. Dic :
The key words are pre-recorded in the car kit for French
language only (the language is determined by the language
used by the menus of the phone).
You need to activate this option if you want to use your own
recorded keywords.
Click «Yes», and «Clear memory?» is displayed.
Confirm by pressing «Yes» and «Memory erasing in progress.
Please wait!» - is announced. To cancel, press «No».
It is possible to erase the memory and reset the system
without using the Parrot menu. To do this, hold the red and the
green buttons together.
If the option «Multi-Tel» is activated for this phone, the
CK3000 EVOLUTION will accept incoming calls from the
other phones if they were previously paired with the CK3000
EVOLUTION.
Warning :
The «Multi-Tel» function is now compatible with the T68i,
T610, T616, T618, Z600 and Z608 (with specific software
versions). This function is available when the «Powersave»
mode is activated in the phone, i.e. «Headset» profile mode.
Once this mode activated, the CK3000 EVOLUTION has
to identify every phone in this new mode. It should be
necessary to connect separately each phone with the CK3000
EVOLUTION and restarting it between each identification.
N° Phone :
Keywords for calling V-Cards («Home», «Work» and
«Cellular») can be accessed by clicking «Yes», Tel. N°. The
voice recognition learning sequence is exactly the same as the
one for the names.
Key words :
Key words are «Phone» and «Hang Up». You need to record
your own key words for use with «Wordspotting» option.
Wordspotting :
If activated, enables use of keywords to make a call and to
hang up.
 Activated: use keywords or buttons
 Deactivated: use buttons only
Voice recognition
Erasing the memory

User's guide
Français
Guide de l’utilisateur
Português English
FrançaisEspañolItalianoNederlands

Guide de l’utilisateur
16 CK3000 EVOLUTION
INTRODUCTION
Le Car Kit Parrot EVOLUTION vous permet d’utiliser votre
téléphone en voiture avec le meilleur confort et la meilleure
sécurité possible.
 L’aide vocale et la reconnaissance vocale vous permettent
de l’utiliser sans lâcher votre volant.
 Votre conversation s’effectue à travers les haut-parleurs de
votre véhicule.
Le Parrot EVOLUTION vous offre les fonctionnalités suivantes :
 Connexion radio sans fil avec votre téléphone
 Conversation mains-libres full duplex avec suppression
d’écho
 Réduction du bruit de fond
 Reconnaissance vocale (jusqu’à 200 noms) *
 Coupure automatique de l’autoradio et connexion aux
enceintes de votre véhicule.
 Jumelage jusqu’à 3 téléphones
Contenu de l’emballage
 Clavier
 Câble d’alimentation
 Boîtier électronique
 Microphone
 Câble mute
 Notice d’utilisation
* Fonction disponible uniquement avec certains téléphone

Guide de l’utilisateur
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
17
Connexion du câble mute et du câble
d’alimentation :
Le câble mute est équipé de connecteurs ISO
de couleur noire.
Le câble d’alimentation est équipé de
connecteurs ISO de couleur grise.
Autoradio avec prises ISO :
Déconnectez les faisceaux audio et alimentation
de l’autoradio
Reliez les connecteurs femelles du câble mute
et du câble d’alimentation à l’autoradio
Reliez les faisceaux audio et alimentation du
véhicule aux connecteurs mâles.
Boîtier électronique :
N’installez pas le boîtier près du chauffage ou de
la climatisation.
Protégez le boîtier d’une exposition directe au
soleil.
Evitez d’enfermer le boîtier entre des parois
métalliques qui altèreraient la qualité de la liaison
Bluetooth®.
Microphone :
Le microphone doit être dirigé vers le conducteur
et installé de préférence entre le pare soleil et le
rétroviseur intérieur.
Clavier :
Nous vous conseillons de l’installer à
un endroit facilement accessible, de
préférence sur une surface plane
nettoyée auparavant.
Reliez le clavier au connecteur prévu à cet effet
sur le câble mute. Vérifiez que les voyants rouge
et vert s’allument et s’éteignent selon la position
de la clé de contact.
MONTAGE
Si votre Parrot EVOLUTION est installé par un professionnel,
passez directement au chapitre suivant, la phase de Jumelage.
Le Parrot EVOLUTION se compose d’un boîtier électronique,
d’un microphone, d’une télécommande à 2 touches et deux
faisceaux de connexion ISO pour l’autoradio.
ATTENTION

Guide de l’utilisateur
18 CK3000 EVOLUTION
ATTENTION
- Le fil rouge du câble d’alimentation doit être
connecté au 12V permanent, le fil orange au 12V
après-contact et le fil noir à la masse.
- Vérifiez le schéma électrique du faisceau
d’alimentation ISO de l’autoradio.
- Sur certains véhicules, il est nécessaire d’inverser
les positions des fils rouge et orange.
Cette opération s’effectue simplement en inversant
les porte-fusibles.
- Ne connectez pas le fil orange au 12V permanent,
vous risqueriez de provoquer la décharge de la
batterie du véhicule.
Si l’autoradio est équipée d’une entrée Mute, reliez le fil jaune
du câble mute à l’une des entrées « Mute in « 1, 2 ou 3.
Consultez la documentation de l’autoradio pour déterminer la
position de l’entrée mute.
Autoradio sans prise ISO :
Vous pouvez utiliser un faisceau d’adaptation spécifique au
véhicule (non fourni)
Si vous ne disposez pas d’un adaptateur, réalisez un montage
fil à fil si la connectique du véhicule n’est pas ISO.
Si l’autoradio possède une entrée « mute «, effectuez la
connexion avec le fil jaune du câble mute.
SCHÉMA DE MONTAGE

Guide de l’utilisateur
English
CK3000 EVOLUTION
FrançaisEspañolItalianoNederlands
Português
19
Choix de la langue lors de la 1ère utilisation
 Appuyez sur le bouton central en laissant le doigt appuyé 2
s (clic long). Le kit annonce la langue en cours d’utilisation par
le kit
 Lorsque vous tourner la molette le kit énonce les langues
disponibles (Anglais, Français, Espagnol, Italien, Hollandais,
Portugais)
 Une fois que vous avez entendu la langue qui vous inté-
resse, valider en appuyant rapidement sur le bouton central
(clic court)
Lors de la première mise sous tension, il est nécessaire de
jumeler votre téléphone avec le kit mains-libres.
 Une fois détecté, «Parrot EVOL» s’affiche sur votre télé-
phone.
 Sélectionnez-le
Jumelage
Pour plus d’informations, référez vous à la notice de
votre téléphone (Chapitre jumelage) ou rendez-vous
sur le site www.parrot.biz
http://www.parrot.biz/guide_chm/evolution/index.
html
Sur la gauche de l’écran, cliquez sur la rubrique
Bluetooth phones : en choisissant le téléphone
que vous souhaitez, vous accédez à toute les
procédures de paramétrage.
JUMELAGE  Entrez le code de liaison 1234 quand votre téléphone vous
y invite puis validez.
Le Parrot EVOLUTION se connecte alors à votre téléphone.
Les menus sont désormais accessibles quand vous cliquez
sur la molette centrale et leur nom est énoncé par le kit mains-
libres lorsque vous tournez cette molette.
Dès lors vous êtes connecté au kit mains-libres et pouvez
l’utiliser pour communiquer
Passer un appel manuellement
 Composez le numéro en utilisant le clavier du téléphone
 La conversation passe automatiquement en mode mains-
libres
Recevoir un appel :
 Appuyez sur le bouton vert du kit mains-libres pour
décrocher.
 Appuyez sur le bouton rouge du kit mains-libres si vous
souhaitez refuser l’appel
Raccrocher :
 Appuyez sur le bouton rouge du kit mains-libres pour
raccrocher.
Messagerie :
Vous avez la possibilité d’accéder aux fonctions de votre
messagerie depuis le kit mains-libres.
 Appelez votre messagerie.
 Lorsque vous entendez les messages, cliquez rapidement
(clic court) sur la molette centrale.
Le kit prononce “0”
Première utilisation

Guide de l’utilisateur
20 CK3000 EVOLUTION
 Tournez alors la molette jusqu’à ce que vous entendiez le
numéro souhaité (1, 2, 3.. )
 Validez en appuyant sur la molette.
Fonction Bis :
 Appuyez longuement (clic long : + de 2 s) sur la touche
verte du kit mains-libres pour rappeler le dernier numéro
composé.
Volume en communication :
 Pendant la communication, réglez le volume en tournant la
molette centrale
Passer un appel en reconnaissance vocale*
 Appuyez sur le bouton vert
 Attendez le bip
 Prononcez le nom de votre correspondant
* Cette fonction est uniquement disponible sur certains téléphones
“French”
“English”
“Italiano”
“Spanish”
“Portuguese”
“Dutch”