Parrot MULTICAN User manual

-1-
Parrot MULTICAN for Mercedes 3 cars
Parrot MULTICAN is a unit able to control Parrot H/F kits with the car’s steering wheel commands
working with CANBUS or K-BUS systems.
This unit is available in two versions, one working with the CK3000 Evolution, another for the CK3100.
Compatibility car models :
Class E : > 2004 SLK : > 2003
Parrot Reference :
- If you are interested, contact our sales department : [email protected]
For Parrot CK3000 EVOLUTION
- Parrot MULTICAN : PI090001AA
For Parrot CK3100 LCD
- Parrot MULTICAN : PI090002AA
Depending on your vehicle's steering wheel controls, there are several possibilities for using a hands-
free kit with the steering wheel controls:
-Mode 1:the steering wheel does not feature any phone button, but only volume adjustment
controls ("Volume (+)" and "Volume (–)" buttons)
-Mode 2: the steering wheel features a single "Phone" button
-Mode 3:the steering wheel features an "Answer" button and a "Hang up" button
With Mercedes steering wheels configuration, you can use either Mode 1 or Mode 2 or Mode 3.
Mode 1 is used by default, in this mode; no specific phone button buttons are used.
Mode 2 is immediately activated when a "Phone" button is pressed. The interface instantly detect that
the steering wheel contains this specific button.
Mode 3 is activated when a "Hang up" button is pressed. The interface instantly detect that the steering
wheel contains this specific button.

Mode 1: Using with the volume adjustment buttons
Depending on the steering
wheel controls in your vehicle,
the MULTICAN interface will
enable you to take full
advantage of the features
available on your hands-free
kit:
•Answer an incoming call: Press the "Volume (+)" button.
•End a call: Press the "Volume (-)" button.
•Refuse an incoming call: Press the "Volume (-)" button.
•Start the voice recognition feature:
Quickly press the "Volume (+)" button, then press
the "Volume (-)" button.
•Redial the last number:
Quickly press the "Volume (+)", followed by a
long press of the "Volume (-)"until the number is
dialled.
•Discreet mode: Quickly press the "Volume (+)" button.
•Exit discreet mode:
During the call, quickly press the "Volume (+)"
button followed by a press of the "Volume (-)"
button
•Increase the volume:
During the call, press the "Volume (+)" button and
then on the "Volume (-)" button re peat this
procedure until you reach the required volume.
•Lower the volume:
During the call, press the "Volume (-)" button and
then on the "Volume (+)" button repeat this
procedure until you reach the required volume.
The followings functions are only possible with Parrot CK3000 Evolution
•Enter the menu:
Press the following sequence twice: “SEEK up”
button then the “SEEK down” button.
These buttons are used to search for radio stations.
•Go forward through the menu:
Press the "Volume (+)" button and then the
"Volume (-)" button, leaving one second
between each press.
•Go backwards through the
menu:
Press the "Volume (-)" button and then the
"Volume (+)" button, leaving one second
between each press.
•Select a menu option: Press the "Volume (+)" button.
•Cancel a function: Press the "Volume (-)" button.
•Reset the hands-free kit:
. Repeat the following sequence five times: press
the "Volume (–)" button and then the "Volume
(+)" button

Mode 2: Using with a single phone button
Depending on the steering
wheel controls in your vehicle,
the MULTICAN interface will
enable you to take full
advantage of the features
available on your hands-free
kit:
•Answer an incoming call: Press the "Phone" button.
•End a call: Long press of the "Phone" button.
•Refuse an incoming call: Long press of the "Phone" button.
•Start the voice recognition feature: Press of the "Phone" button.
•Redial the last number: Long press of the "Phone" button.
•Discreet mode: Press the "Phone" button.
•Exit discreet mode: Press the "Phone" button
•Increase the volume:
During the call, press the "Volume (+)" button,
repeat this procedure until you reach the required
volume.
•Lower the volume:
During the call, press the "Volume (-)" button,
repeat this procedure until you reach the required
volume.
The followings functions are only possible with Parrot CK3000 Evolution
•Enter the menu:
Press the following sequence twice: [SEEK up]
button then the [SEEK down] button.
•Go forward through the menu: Press the "Volume (+)" button.
•Go backwards through the menu: Press the "Volume (-)" button.
•Select a menu option: Press the "Phone" button.
•Cancel a function: Long press of the "Phone" button.
•Reset the hands-free kit:
Repeat the following sequence five times: press
the "Volume (-)" button and then the "Volume
(+)".

Mode 3: Using with 2 phone buttons
Depending on the steering
wheel controls in your vehicle,
the MULTICAN interface will
enable you to take full
advantage of the features
available on your hands-free
kit:
•Answer an incoming call: Press the "Pick up" button.
•End a call: Press the "Hang up" button.
•Start the voice recognition feature: Quick press of the " Pick up " button.
•Redial the last number: Long press of the " Pick up " button.
•Discreet mode: Press the " Pick up" button.
•Exit discreet mode:
Press the " Pick up " button.
•Increase the volume:
During the call, press the "Volume (+)" button
until you reach the required volume.
•Lower the volume:
During the call, press the "Volume (-)" button until
you reach the required volume.
The followings functions are only possible with Parrot CK3000 Evolution
•Enter the menu:
Press the following sequence twice: [SEEK up]
button then the [SEEK down] button.
•Go forward through the menu: Press the "Volume (+)" button.
•Go backwards through the menu: Press the "Volume (-)" button.
•Select a menu option: Quickly press the "Pick up" button.
•Cancel a function:
Quickly press of the "Hang up" button.
•Reset the hands-free kit:
Repeat the following sequence five times: press
the "Volume (-)" button and then the "Volume
(+)".

Wiring diagram for
CK3000 EVOLUTION and CK3100 LCD
It is important to follow the wiring diagram for your vehicle. We would advise our customers
to have the interface fitted by a professional.
In this technical document, you will find all information for correctly install your
MULTICAN interface.
Important: Usually the 12v ignition is supplied by MULTICAN unit
CK3000 EVOLUTION
CK3100 LCD