Parrot MKi9200 RU User manual

Parrot MKi9200 –
User guide
1
User
Engli
Parrot
All manuals and user guides at all-guides.com
all-guides.com

Parrot MKi9200 –
User guide
2
Content
Content............................................................ 2
Introduction....................................................... 4
Installing the Parrot MKi9200...................................... 5
Car stereo with ISO connectors ................................................................................................. 5
Car stereo with line-in............................................................................................................... 6
Car stereo without ISO connectors ............................................................................................ 7
Installing the electronic box ...................................................................................................... 7
Installing the kit’s power cable .................................................................................................. 7
Checking the wiring .................................................................................................................. 8
Installing the audio connectors ................................................................................................. 8
Installing the re ote control ..................................................................................................... 8
Installing the double icrophone .............................................................................................. 9
Installing the screen .................................................................................................................. 9
Using the Parrot MKi9200 for the 1st time......................... 11
Navigating through the enus ................................................................................................ 11
Adjusting the enu volu e .................................................................................................... 11
Pairing and connecting a phone / PDA via Bluetooth ............................................................... 11
Synchronizing the phonebook ................................................................................................. 12
Clearing the e ory .............................................................................................................. 12
Using the Voice Recognition function.............................. 13
Making a call via voice recognition .......................................................................................... 13
Receiving a call via voice recognition ....................................................................................... 14
Using the telephony function...................................... 15
Receiving a call ....................................................................................................................... 15
Making a call .......................................................................................................................... 15
Using the redial function ......................................................................................................... 15
Using the discreet ode ......................................................................................................... 16
Using the secret ode ............................................................................................................ 16
Answering a second call .......................................................................................................... 16
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
3
Sending DTMFs ...................................................................................................................... 17
Adjusting the .......................................................................................................................... 17
volu e ................................................................................................................................... 17
Using the Music function.......................................... 18
Selecting a usic source ......................................................................................................... 18
Using the re ote control during usic files playback .............................................................. 19
• Pausing during playback ...................................................................................................................... 19
• Fast rewinding / fast forwarding the current track ............................................................................. 19
• Selecting music files ............................................................................................................................. 19
• Adjusting the olume ........................................................................................................................... 19
• Accessing to the audio effects menu ................................................................................................... 19
Modifying the display settings.................................... 20
Adjusting the brightness ......................................................................................................... 20
Changing the wallpaper .......................................................................................................... 20
• Selecting a wallpaper proposed by default ......................................................................................... 20
• Customizing the wallpaper .................................................................................................................. 20
Modifying the audio settings...................................... 21
Activating the vocal enus ..................................................................................................... 21
Adjusting the ringtone volu e ................................................................................................ 21
Activating the lateral noise detection ...................................................................................... 21
Deactivating the Mute on Strea ing ....................................................................................... 21
Activating the spatialization .................................................................................................... 21
Activating the equalizer .......................................................................................................... 22
Activating the Virtual Super Bass effect ................................................................................... 22
Activating the Repetition / Rando options ............................................................................ 22
Updating your Parrot MKi9200...................................... 24
Hotline........................................................... 24
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
4
Introduction
The Bluetooth® technology enables voice and data to be sent via a
short-distance radio link. It allows several electronic devices to
communicate with each other, particularly phones and hands-free
kits.
Parrot is drawing on its long years of experience in signal
processing and voice recognition technology to offer a hands-free
car with superior audio quality during calls: The Parrot MKi9200.
Once paired with your Bluetooth mobile phone, the Parrot MKi9200
enables you to establish in a few seconds any phone conversations in
your vehicle without needing to handle the telephone, even leaving
it in your pocket. Connection with your mobile is made in a
completely transparent way.
The user-independent voice recognition and voice synthesis are
integrated in your Parrot MKi9200, which dramatically ease the way
of using them in every situation. And all the connectors for any
type of music are provided: iPod, iPhone, iTouch, USB keys, USB MP3
players, Bluetooth Stereo devices, CD players, MiniDisc…
A steering wheel control interface can be used to connect your
vehicle’s steering wheel controls to your Parrot hands-free ki
t.
With this interface, you will be able to make phone calls via the
steering wheel controls while keeping your hands on the wheel.
Refer to our website www.parrot.com for more information.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
5
Installing the Parrot
MKi9200
We advise our customers to have the Parrot MKi9200 fitted by
a professional.
• Remove the audio system from your vehicles dashboard to access the
wiring harness.
• The cables supplied with the kit feature ISO connectors and two
pairs of line-out jacks. The line-out jacks can be used if your
audio system features this option (use of an amplifier). Several
set-ups are therefore possible depending on the type of car
stereo and your vehicle.
• The mute function is used to cut the sound of your car stereo to
enable a phone call. The choice of the mute-in jack depends on
your car stereo’s configuration.
• Make sure the cables are not pinched at the end of the
installation process.
Car stereo
with ISO
connectors
1.
Connect the male connectors of the hands
-
f
ree kit
to the car stereo.
2. Join the vehicle’s audio and power supply cables
to the female connectors of the Parrot MKi9200.
3. On the installation cable, connect the free yellow
wire to one of the audio system’s corresponding
mute-in jacks if available (mute in 1, mute in 2
or mute in 3).
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
6
Car stereo
with line-in
•
Use this type of connection by wiring the line
-
out
(brown & white wire or red & black wire) to your
car stereo’s line-in.
• Using the two pairs of line-
out will enable you to
take advantage of
the streaming audio function in
stereo over your vehicle’s speakers.
•
On the installation cable, connect the free yellow
wire to the corresponding audio system’s mute-
input
if available (mute in 1, mute in 2 or mute in 3).
All manuals and user guides at all-guides.com
all-guides.com

Parrot MKi9200 –
User guide
7
Car stereo
without ISO
connectors
To simplify the wiring procedure, you will need to
purchase an ISO adapter cable. Refer to the range of
ISO adapters on our website: www.parrot.com.
Installing
the
electronic
box
Avoid installing the ele
ctronic box
:
- near heating or air-conditioning system;
- on a spot directly exposed to sunlight;
- behind metal walls.
Installing
the kit’s
power cable
In order to check the wiring, connect the screen
before placing it on the dashboard.
►Refer to the Checking the wiring
section for
more information.
• Refer to your car stereo’s wiring diagram.
• The red wire of the kit’s cable must correspond to
the constant +12V supply, the orange wire to the
ignition +12V and the black wire to ground. Check
that the orange wire is not connected to the constant
+12V supply, as you could run down the vehicle’s
battery.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
8
On some vehicles, there is no ignition +12V on the
vehicle’s connectors. You must therefore connect
the orange power supply wire to the
fuse box or
another ignition power source.
Checking the
wiring
•
To perform the installation check, turn the ignition
on then off once the Parrot MKi9200
is installed: the
message “Goodbye!” must be displayed.
• If it is not the case, it is necessary
to inverse the
positions of the red and orange wires. Indeed, the
red wire of the power cable must be connected to the
permanent 12V, the orange wire to the 12V ignition
and the black wire to the ground. This can be done
simply by reversing both fuse hold
ers located on the
Parrot wiring.
Installing
the audio
connectors
•
Connect the music cable to the electronic box and
place the USB / iPod / Jack connectors into the glove
box, the central console or the parcel tray depending
on the configuration of your
dashboard. Make sure
that the cable is not pinched.
•
Use the provided protection cap to protect the
connectors.
Installing
the remote
control
•
Choose the place for the remote control inside your
vehicle. We would advise you to fit it in the center
of the dashboard or close to the steering wheel.
•
If you want to place the remote control on the
steering wheel, make sure it is securely attached,
so that it does not move when you are driving. Do
not install the remote control on the outside of the
steering
wheel, so that it does not get in the way
when driving.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
9
•
If you want to place the remote control on the
dashboard, stick the double-sided tape located on
the flat side of the bracket to fix it against the
dashboard. You can then insert the remote onto the
bracket.
Once you have stuck the support on the
dashboard, wait for approximately 2 hours to
make sure the adhesive tape adheres well.
Installing the
double
microphone
Parrots microphones are directional and need to
be pointed towards
the user to pick up clear
speech. The microphone should be installed near
the front roof light cluster, in the centre of
the vehicle with a clear path to the user.
Installing the
screen
•
Once you have stuck the support on the
dashboard, wait for approx
imately 2 hours to
make sure the adhesive tape adheres well.
•
Remember to remove your screen when leaving the
vehicle to avoid tempting any would-
be thieves
and to prevent prolonged exposure to sunlight.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
10
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
11
Using the Parrot MKi9200 for the
1st time
Navigating
through the
menus
.
If the remote control doesn’t seem to be associated
to the electronic box while using the Parrot
MKi9200, hold down the , and buttons for 3
seconds. This is only possible during the first 30s after
the car kit’s ignition.
•
Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
•Browse through the menus by turning the wheel
and confirm with the button or by pressing
the scroll wheel.
•To exit the menu, press the
button or wait a
few seconds.
Adjusting the
menu volume
To adjust the volume of the
Parrot MKi
9200
,
press
the jog wheel and select Settings
> Audio > Menu
Volume . U
se the jog wheel to adjust the desired
volume then validate.
The Audio menu also allows you to
deactivate
the vocal menus. For further information, refer
to the Modifying the audio settings section.
Pairing and
connecting a
phone / PDA
via Bluetooth
Prior to using your Parrot MKi
9200
with your phone
for the very first time, you must in
itially pair
both devices. The pairing process is only required
once.
1. Make sure the Parrot MKi9200
is set so that it
is visible by all Bluetooth
® devices. To do
so, press the jog wheel and select Settings
>
Bluetooth >Visibility.
Then, make sure this
opt
ion is selected. If it is not the case,
select it by pressing the jog wheel.
The Parrot MKi9200
is visible by
default.
2. Press the jog wheel and select Settings >
All manuals and user guides at all-guides.com
all-guides.com

Parrot MKi9200 –
User guide
12
Bluetooth >
Pair with
…
.
> If your mobile phone’s model appears in the
list, select it and confirm by pressing the
jog wheel.
>
If your mobile phone model doesn’t appear in
the list, select the Other phones option.
3. From your phone, search for
Bluetooth
peripherals. Refer to your phone user guide
for more information.
> The list of the available
Bluetooth
peripherals is displayed.
4. Select « Parrot MKi9200 » in the list.
5. Enter « 0000 » on your phone when you are
prompted to enter a PIN code.
> «Pairing successful» is displayed on the
screen of the Parrot MKi9200.
Once your phone is paired t
o the Parrot MKi9200,
the connection between both devices will be
automatically established each time you enter
your vehicle if your screen is plugged in.
Synchronizing
the phonebook
With some Bluetooth phones, the Parrot MKi9200
automatically synch
ronizes the names and phone
numbers in your mobile with its phonebook. If your
phone doesn’t support automatic synchronization,
you can also send contacts from your mobile to the
car kit via Object Push. To do so:
1. Press the jog wheel and select Phone > Receive
contacts.
2. Refer to your phones ‘user guide for more
information about sending contacts via Object
Push.
Clearing the
memory
You can pair up to
10
devices with the Parrot
MKi9200.
If you attempt to pair a 11
th
phone, the Parrot
MKi9200 says and displays « memory full ». If you
attempt to pair a 11
th
phone, the Parrot MKi9200 says
and displays « memory full ». You can delete a device
by selecting it through the Settings > Bluetooth >
Paired devices menu.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
13
Using the Voice Recognition
function
Before using your Parrot MKi9200 voice recognition function, you
first have to connect it with your phone / PDA.
►Refer to the Pairing and Connecting a phone via Bluetooth section
for more information.
Making a call
via voice
recognition
Th
is function is available if you have
previously synchronized your contacts in
the kit.
1. Press the button to launch the voice
recognition feature.
> A beep is emitted.
2. Say the « Call » keyword and the name of
the contact you want to call.
> The call is automatically launched if
the voice tag is correctly understood.
> If it is not the case, a confirmation
message is asked by the kit.
You can make a call via voice recognition
using several combinations
of keywords. For
example, « call ‘Bob’» or simply « ‘Bob’ ».
You can also associate the type of number
you want to call: «call ‘Bob’ at home»,
«’Bob’ home », etc.
3. Confirm by saying « Yes » or « Call ».
> The call is initiated.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
14
Receiving a
call via voice
recognition
•The magic word «Accept
» allows you to
accept an incoming call.
•The magic word «Refuse
» allows you to
reject an incoming call.
To activate/deactivate
the magic words, you must
activate them. To do so :
1. Press the jog wheel and select Ph
one >
Voice Commands > Magic words.
2.
Press the jog wheel to activate/deactivate
the magic words.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
15
Using the telephony
function
Before using your Parrot MKi9200 telephony function, you first have
to connect it with your phone / PDA.
►Refer to the Pairing and Connecting a phone via Bluetooth section
for more information.
Receiving a
call
An incoming call is indicated by a ringtone
.
The name of the caller is announced and
displayed if his details are stored in the
phonebook of the phone connected to the Parrot
MKi9200.
•If you want to answer the call, press the
button. Then, press the button to end the
call.
•If you want to refuse this call, press the
button.
Making a
call
•If the contact you want to call is in the
phonebook of the phone connected to the Parrot
MKi9200:
1. Press the jog wheel to enter the main
menu and select
Phonebook.
2. Select a letter and press the jog wheel.
> Once the contact chosen:
- Press the button to call this
contact.
- Or use the jog wheel to choose between
different numbers of the same contact.
•
If the contact you want to call is not in the
phonebook of the phone connect
ed to the Parrot
MKi9200
, stop your vehicle in a safe location,
press the jog wheel and select
Phonebook > Dial
a number.
You can also make the call directly
from your phone.
Using the
redial
function
Hold down the key of the Parrot MKi900 for two
seconds to redial the last number dialled.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
16
Using the
discreet
mode
•
During a call, if you want to continue the
conversation on your phone (private conversation),
press the button of the Parrot MKi9200.
> The call is automatically transferred to t
he
phone.
•If you want to switch back to the kit,
press the
button again.
Using the
secret mode
•
During a call, if you want to deactivate the
microphone, hold down the
button for two
seconds.
• Press the same button to activate it again.
Answering a
second call
The Parrot MKi
9200
allows you to manage two calls
simultaneously if your phone supports this
functionality. For further information, refer to the
user guide of your phone.
•To accept the second call
1. Press the button of the Parrot MKi9200.
>The first call is automatically put on hold.
2. Press the button of the Parrot MKi9200
or the
green button of your phone to switch from a
call to another.
3. Press the button of the Parrot MKi9200
to end
the current call. You can also ha
ng up directly
from your phone.
>
You are automatically in communication with
the call
on hold.
•To reject the second call
Press the button of the Parrot MKi9200
. You can
also reject it directly from your phone.
All manuals and user guides at all-guides.com
all-guides.com

Parrot MKi9200 –
User guide
17
Sending
DTMFs
During a call, the Pa
rrot MKi
9200
allows you to send
DTMFs to manage your voice mail for example. To do so
:
1. Press the jog wheel to access the DTMF menu.
> « 0 » is displayed by the kit.
2. Use the jog wheel to select your DTMF between
the following possibilities : 0,1,2,3,4,5,6,7,8,9,# or *.
3. Press the jog wheel to send this DTMF to your phone.
Adjusting
the
volume
During a call, use the jog wheel on the Parrot
MKi9200 or adjust the volume directly on your phone.
> The volume setting is saved for subsequent calls.
The volume adjusted on the Parrot MKi9200
is not
saved for the calls on your phone.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
18
Using the Music function
Selecting a
music source
•Use the USB, Jack or iPod connectors to connect the Parrot
MKi9200 to your audio player / iPod / USB stick.
•The Parrot MKi9200 also allows you to play music files stored on an
SD card. To transfer music files:
1. Insert the SD card into the appropriate slot.
2. Connect the Parrot MKi9200 to your computer using a USB /
mini-USB cable.
3. Copy your music files in MP3 or WMA formats as if it was a
USB flash drive.
•Press the button to launch the music function. Press the jog
wheel to access the content of the selected source. If the tags of your
music files are correctly defined, you can select one of the
classification items (artists, genres, albums …) and press the jog
wheel.
•To change the music source, press the jog wheel and select your
audio source in the following order:
- iPod,
- USB peripheral,
- SD card
- audio player connected via Bluetooth,
- audio player connected via Line-in.
If your Parrot MKi9200 is connected to an iPhone
and an USB flash drive, the iPhone has priority:
you only be able to acc
ess and play the Iphone
contents
While navigating through the menus or when the
screensaver is active, press the
button to
get back to the music player.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
19
Using the
remote
control
during music
files
playback
•Pausing during playback
When playing music file, press the button to momentarily stop
playback.
Press the button again to resume playback of the music track.
•Fast rewinding / fast forwarding the current
track
When playing a music file, hold down the and
buttons to fast rewind or forward
the current
track.
•Selecting music files
When playing a music file, press the and buttons to change to
the previous or next track by pressing the respectively.
During the music files playback, press the
button to access
the content of the selected source. Then, you can
navigate and change the music file you’re listening
to using the jog wheel.
The Next/Previous tracks function
s are not
available if the Parrot MKi9200
is connected
to the audio player via the Jack connector.
•Adjusting the volume
When playing a music file, use the jog wheel to
adjust the volume.
The volume for calls and the volume for the
streaming audio function work separately.
•Accessing to the audio effects menu
When playing a music file, hold down the button for 2 seconds to
access to the audio effects menu.
For more information about the audio settings
of
the Parrot MKi9200, refer to the Modifying
the
audio settings section.
All manuals and user guides at all-guides.com

Parrot MKi9200 –
User guide
20
Modifying the display
settings
Adjusting
the
brightness
You can adapt the screen brightness of the Parrot
MKi9200. To do so, press the jog wheel and select
Settings > Brightness then select Night Mode or
Day
Mode.
Changing the
wallpaper
You can change the wallpaper of the Parrot MKi9200 by
selecting one of the wallpapers proposed by default.
You can also customize it by sending a photo directly
to the kit.
•Selecting a wallpaper proposed by default
1. Press the jog wheel and select
Settings > Display
> Wallpaper
then use the jog wheel to choose in
the list wallpaper you want to display.
2. Press the jog wheel to validate.
•Customizing the wallpaper
1. Make sure the Parrot MKi9200 is set so that it is
visible by allBluetooth devices. To do so, press the
jog wheel and select Settings > Bluetooth >
Visibility.Then, make sure this option is selected.
If it is not the case, select it by pressing the jog
wheel.
2. Press the jog wheel then select Settings > Display
> Wallpaper > Customize > Add.
> « Waiting for a picture » is displayed
on the
Parrot MKi9200.
3. From your Bluetooth peripheral, send via Bluetooth
the image you want to display on the Parrot MKi9200.
►Refer to your device documentation for more
information about sending photos via Bluetooth.
To delete an image sent as wallpaper on your
Parrot MKi9200, press the jog wheel then select
Settings > Display > Wallpaper > Customize
>
Delete.
All manuals and user guides at all-guides.com