Paslode 4200/50 S16 User manual

MODEL 4200/50 S16
MODEL 4200/50 S14-15
STAPLERS
IMPORTANT!
DO NOT DESTROY
Always refer to safety and maintenance
manual #403606 for detailed information
on this tool. It is the customer's responsi-
bility to have all operators and service
personnel read and understand this
information.
TOOLSCHEMATICAND PARTS
P

PARTS LEGEND
1404229 2 Socket Head Capscrew, 1/4-20 x 2-1/4"
3091447 4 Washer
4402979 4 Spacer, Diffuser
5402978 1 Cap, Diffuser
*6 500011 1 Cap
*7 402955 1 Gasket, Cap
8402959 1 Spring, Main Valve
9500322 1 Retaining Ring
*10 402962 1 "O" Ring, Upper Valve Piston
11 402941 1 Upper Valve Piston
*12 092729 1 "O" Ring, Lower Valve Piston
*13 004163 1 "O" Ring, Lower Valve Piston
*14 402974 1 "O" Ring, Lower Valve Piston
15 500321 1 Lower Valve Piston
16 405211 1 Seal, Main Valve
*17 402963 1 "O" Ring, Main Valve Post
18 402944 1 Post, Main Valve
▲19 070502 1 Round Head Machine Screw, #8-32 x 5/8"
20 400196 1 Gripco Nut
21 095412 2 Washer, Driver Blade
*22 091967 1 "O" Ring, Piston
23 500009 1 Piston
▲*24 095777 1 Driver Blade
25 402954 1 Seal, Sleeve
26 406011 1 Sleeve
*27 401952 1 "O" Ring, Sleeve
*28 402728 1 "O" Ring, Sleeve
*29 403762 1 Bumper
30 500010 1 Sleeve, Bumper
31 402079 1 Pin, Trigger
32 404938 2 Logo, Housing
33 402926 1 Housing
34 091622 1 Reducing Pipe Bushing, 1/4" x 3/8"
35 097748 1 Spring, Valve Pin
36 097746 1 Valve Pin
37 401958 1 Valve Body
38 026133 2 Roll Pin, 1/8" Dia. x 1" Lg.
*39 092174 1 "O" Ring, Valve Body
40 405144 1 Trigger
41 404325 1 Stop Nut
42 095778 1 Seal
43 094295 1 "O" Ring
45 500690 1 Nameplate (4200/50 S16)
096893 1 Nameplate (4200/50 S14-15)
*46 091208 1 "O" Ring Housing
47 402983 1 Flange, Nose
48 095417 4 Lock Washer, 5/16"
4200/50 S16, 402980
4200/50 S14-15, 500000
49 009016 4 Socket Head Capscrew, 5/16-18 x 1"
50 004502 2 Socket Head Capscrew, #10-32 x 5/8"
51 004238 4 Lock Washer, #10
52 092037 2 Lock Nut, #10-32
▲53 004224 5 Socket Head Capscrew, #10-32 x 3/8"
54 402984 1 Rail Bracket
*55 402738 2 Spring
56 402629 2 Hardened Washer
57 402981 1 Intermediate Work Contacting Element
58 402736 1 Flat Washer, #10
59 403207 1 Lower Work Contacting Element
60 402792 1 Upper Work Contacting Element
61 403204 1 Front Guide (4200/50 S16)
404287 1 Front Guide (4200/50 S14-15)
▲62 404232 3 Socket Head Capscrew, #8-32x13/16"
63 403205 1 Back Plate (4200/50 S16)
404288 1 Back Plate (4200/50 S14-15)
64 404698 2 Roll Pin Assembly
65 402730 1 Pivot Pin, Front Guide
66 405079 1 Spring, Front Latch
67 403206 1 Latch, Front Guide
68 092176 1 Roll Pin, 5/32" Dia. x 1-3/8" Lg.
**69 403514 1 Warning Label
70 402780 1 Pivoting Rail Cover Assembly
71 403427 1 Rail and Rail Cover Assembly
72 402731 2 Logo, Magazine
73 402740 1 Roll Pin, 3/32" Dia. x 7/16" Lg.
74 070545 1 Lock Washer, #6
▲75 091568 1 Binding Head Screw, #6-32 x 1/4"
*76 091532 1 Negator
77 091534 1 Drum, Negator
78 402743 1 Pin, Negator Drum
79 402799 1 Spring, Follower Latch
80 402798 1 Button, Follower Latch
81 402797 1 Bushing, Follower Latch
82 402796 1 Follower
83 402668 1 Retaining Ring
84 091591 1 "O" Ring
85 401940 1 End Plug
87 405147 1 Lever, Trigger
88 005849 1 Roll Pin
89 500488 1 Grip.Handle
90 403716 2 Socket Head Capscrew 10-32 x 5/16"
91 402734 1 Spring
92 406010 1 Flange,Sleeve
93 402961 1 "O" Ring, Fange Sleeve
*Denotes normal wear items.
** Make sure warning label (403514) is properly affixed.
Replace if necessary. Label available at no charge through
the Service Dept.
▲Apply Loctite 242 (Blue) Part No. 093500
➔Denotes new change.

PARTS OFFERED AS ASSEMBLIES
500176 Piston Assembly
Includes
20 400196 1 Gripco Nut
21 095412 2 Washer, Driver Blade
22 091967 1 "O" Ring, Piston
23 500009 1 Piston
24 096050 1 Driver Blade
500237 Cap Assembly
Includes
4091363 1 Flexloc Thin Nut, #8-32
5401955 1 Flat Washer, #8
6500011 1 Cap
9500322 1 Retaining Ring
10 402962 1 "O" Ring, Upper Valve Piston
11 402941 1 Upper Valve Piston
12 092729 1 "O" Ring, Lower Valve Piston
13 004163 1 "O" Ring, Lower Valve Piston
14 402974 1 "O" Ring, Lower Valve Piston
15 500321 1 Lower Valve Piston
16 405211 1 Seal, Main Valve
17 402963 1 "O" Ring, Main Valve Post
18 402944 1 Post, Main Valve
19 070502 1 Button Head Socket Cap Screw
#8-32 x 5/8"
405212 Main Valve Assembly
Includes
9500322 1 Retaining Ring
10 402962 1 "O" Ring, Upper Valve Piston
11 402941 1 Upper Valve Piston
12 092729 1 "O" Ring, Lower Valve Piston
13 004163 1 "O" Ring, Lower Valve Piston
14 402974 1 "O" Ring, Lower Valve Piston
15 500321 1 Lower Valve Piston
16 405211 1 Seal, Main Valve
SAFETY INSTRUCTIONS
WEAR EYE AND HEARING PROTECTION
Always wear hearing protection and eye
protection devices, including side shields
when operating or working in the vicinity
of a tool.
DO NOT EXCEED MAXIMUM
RECOMMENDED AIR PRESSURE
Operate the tool using only the recom-
mended air pressure. Do not exceed the
maximum air pressure marked on the tool.
Be sure the air pressure gauge is operating
properly and check it at least twice a day.
60
0
120
60
0
120
.100
.090
.080
.070
.060
.050
.040
60
70 80 90 100 110 120
.077
AIR CONSUMPTION CHART
AIR PRESSURE - PSIG
AIR CONSUMPTION - SCSCF/FASTENER
402408 Trigger Assembly
Includes
40 405144 1 Trigger
87 405147 1 Lever
88 005849 1 Roll Pin
Never use any bottled air or gases
such as oxygen to operate the tool
since they could cause the tool to
explode.

4200/50 S16
402980
4200/50 S14-15
500000
WARNING
All parts must be periodically inspected
and replaced if worn or broken. Failure to
do this can affect the tool’s operation and
present a safety hazard.

Remote Fire Valve
This valve via a positive air signal allows a machine
mounted tool to be operated from an automatic air
valve or foot pedal system.
Lubricants and Loctite
Loctite 242 (Blue) 1 oz. Part No. 093500
Lubricating Oil 16 oz. Part No. 403720
Lubricating Oil with Antifreeze Part No. 219090
Chemplex 710 Lubricant 1 lb. Part No. 403734
Degreaser Cleaner
Ideal Cleaner for all Paslode Tools Part No. 219086
Safety Glasses
Clear Part No. 402510
Tinted Part No. 402512
Universal Belt Hook
Attaches to cap of tool enabling you to carry tool on belt holder Part No. 219017
Belt Hook Holder
Attaches to work belt and carries tool using the above belt hook Part No. 219028
Large Carrying Case Part No. 219034
ACCESSORIES
Sequential Operating Kit
This special attachment is designed for
sequential operation (stops "contact" firing).
The operator must depress and hold the work
contacting element against the work surface
before pulling the trigger. This sequence
must be repeated each time the tool drives a
fastener. Part No. 406006
Part No. 1X0713
An Illinois Tool Works Company
888 Forest Edge Drive
Vernon Hills, Il 60061
Printed in U.S.A.
© 2002, Illinois Tool Works Inc. 400597-13
11/02
P