Paxton Ins-30160 User manual

20/06/2011
Ins-30160 PROXIMITY metal HIDTM reader Paxton
Readers mounted together
Mounted on metal surface
Suitability
Security-sensitive doors
Wet environments
Fitting
Cable extensions
Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Wiring
10V DC 14V DC
140 mA
115 kHz 135 KHz
- 35 °C + 66 °C
IPX7
76 mm 76 mm 27 mm
40 mm 20 mm
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
Voltage
Carrier frequency
Specications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Cable length
Read Range Token Keyfob
Waterproof
Min Max
3 metres
This product is not suitable for retail sale. All warranties are
invalid if this product is not installed by a competent person.
Token type and conguration
The reader will recognise 125 kHz HIDTM proximity tokens in format to produce a Wiegand output (26 to 50 bit) or
EM4100 tokens to produce an ABA Track2 Clock and Data output.
The reader scans the rst token presented after power up and will match the reader mode to the format discovered.
If no token is read within 3 minutes of powering up, the reader will default to HIDTM. If you require EM4100
operation, power cycle the reader and present an EM4100 token within 3 minutes.
Once in HIDTM or EM4100 mode, the reader will remain in that format.
Connection to a Net2
ACU reader port
+12V DC
Red LED
Amber LED
Green LED
Clock/data1
Data/data0
Not required
0V
Hands Free Token
Not Compatible
If used with Net2, the ACU reader port must be congured to read the correct data format.
Where Wiegand cards are used, you must set the correct data format (e.g. Wiegand 26 bits) in the ACU
reader port conguration or create a custom wiegand lter in the Net2 Server Conguration Utility. For further
information see: AN1010 - Conguring custom Wiegand formats < http://paxton.info/990 >
Outdoor Use

Ins-30160 PROXIMITY metal HIDTM reader Paxton
Readers mounted together
Mounted on metal surface
Suitability
Security-sensitive doors
Wet environments
Fitting
Cable extensions
Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Wiring
10V DC 14V DC
140 mA
115 kHz 135 KHz
- 35 °C + 66 °C
IPX7
76 mm 76 mm 27 mm
40 mm 20 mm
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
Voltage
Carrier frequency
Specications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Cable length
Read Range Token Keyfob
Waterproof
Min Max
3 metres
This product is not suitable for retail sale. All warranties are
invalid if this product is not installed by a competent person.
Token type and conguration
The reader will recognise 125 kHz HIDTM proximity tokens in format to produce a Wiegand output (26 to 50 bit) or
EM4100 tokens to produce an ABA Track2 Clock and Data output.
The reader scans the rst token presented after power up and will match the reader mode to the format discovered.
If no token is read within 3 minutes of powering up, the reader will default to HIDTM. If you require EM4100
operation, power cycle the reader and present an EM4100 token within 3 minutes.
Once in HIDTM or EM4100 mode, the reader will remain in that format.
Connection to a Net2
ACU reader port
+12V DC
Red LED
Amber LED
Green LED
Clock/data1
Data/data0
Not required
0V
Hands Free Token
Not Compatible
If used with Net2, the ACU reader port must be congured to read the correct data format.
Where Wiegand cards are used, you must set the correct data format (e.g. Wiegand 26 bits) in the ACU
reader port conguration or create a custom wiegand lter in the Net2 Server Conguration Utility. For further
information see: AN1010 - Conguring custom Wiegand formats < http://paxton.info/990 >
Outdoor Use