+44 (0)1273 811011
paxton.support
877.438.7298
usapaxton.support
+31 (0)76 3333 999
paxton.benelux.support
+32 (0) 78485147
paxton.benelux.support
+49 (0) 251 2080 6900
paxton.gmbh.support
+33 (0)1 57 32 93 56
paxton.support
+27 (0) 21 4276691
paxton.support
8000 3570 3783
paxton.support
+52 55 5351 3667
paxton.soporte
+57 1508 8198
paxton.soporte
+44 (0)1273 811011
paxton.support
The declaration of conformity is available on request. Contact details are
provided at: http://paxton.info/596
These products are not suitable for retail sale. All warranties are invalid if
these products are not installed by a competent person.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes
or modications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist.
Product compliance and limitations
North America:-
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70),
local codes, and the authorities having jurisdiction.
FCC Compliance
Enviromental Protection
Important note - Products not certied in Canada: 353-110 (PROXIMITY reader P50),
373-120 (PROXIMITY reader - P75, Screw connector), 353-115, 375-120 (PROXIMITY
keypad - K75, Screw connector), 371-120 (TOUCHLOCK keypad - K75, Screw
connector), 372-120 (TOUCHLOCK stainless steel keypad - K75, Screw connector), 353-
467 (Net2 PROXIMITY Mifare reader - P50)
Products not certied in the US: 353-115
Conformité et limitations du produit
Ce dispositif est conforme au(x) standards RSS de l’industrie Canadienne sans-licence. Le
fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne doit pas créer
d’interférences nuisibles et (2) ce dispositif doit accepter toute interférence reçue, y compris
des interférences qui peuvent causer un fonctionnement non souhaité.
Les méthodes de câblage doivent être en accord avec le code nation électrique (ANSI/
NFPA70), codes locaux et les autorités ayant la juridiction.
7 8
