Paxton Net2 PaxLock User manual

The Net2 PaxLock demo case is the ideal sales tool to show customers the
true capabilities of Net2 PaxLock.
What's in the box?
Net2 PaxLock Demo Case
Quick Start Guide
• Net2 PaxLock (Paxton token, key override version)
• Demo stand with Euro prole 72mm lock case
• Net2Air bridge - USB
• Net2 desktop reader
• Net2 software - Pro DVD
• Net2 token selection
• 2 x USB cables
• 1 x security Allen key 3mm
• Robust travel case
• Euro prole locking cylinder and 3 x keys
Insert batteries into the Net2 PaxLock.
The unit will power up and run an
audible self-diagnostic check.
Step 1

The Net2 PaxLock unit is now online and ready to use.
http://www.paxton.co.uk/ suppor[email protected].uk01273 811011
Ins-30171
Firmly push the backplate in position
and secure the handle using the Allen
key provided.
Step 2
Paxton
Connect the Net2 desktop reader and
the Net2Air bridge to your PC, then
install the Net2 software. Once the
software is installed, you will see the
green and red LEDs illuminated on
the Net2Air bridge.
Step 3
Paxton
Open the Net2 software and present
your user token to the Net2 desktop
reader. This will open the Add User
interface for you to enter your details.
Step 4
Once the user details have been added,
present the user token to the Net2
PaxLock unit. The Net2 PaxLock will
now bind to the database.
You will see additional activity with the
blue LED on the Net2Air bridge and the
Net2 PaxLock will also appear within
the Doors screen of the Net2 software.
Step 5
02/02/2012