PB TEEN Wingback Task Chair User manual

Wingback Task Chair
PRE-ASSEMBLY:
Please read all instruction before beginning assembly. The illustrations provided allow for easier
assembly when used in conjunction with the assembly instructions.
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this
will avoid damaging any parts during assembly. The shipping box provides and ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
For your safety and ease, adult assembly by two people is recommended.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting
assembly.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.
HARDWARE ENCLOSED:
(A) Bolt – 4 pcs (B) Spring Washer – 4pcs (C) Washer – 4pcs (D) Allen Key – 1pc

PARTS ENCLOSED:
(E) Seat – 1pc (F) Post – 1pc (G) Chair Base – 1pc (H) Caster – 5pcs (I) Plate – 1pc
ASSEMBLY INSTRUCTIONS:
1. Insert five Casters (H) into Chair Base (G) by pressing firmly.
2. Insert Post (F) into Chair Base (G) by pressing firmly.
3. Attach Plate (I) to seat (E) with a combination of Bolt (A) Spring washer (B) Washer (C).
4. Insert assembled Seat onto top of Post (F)
Step 1 Step 2 Step 3
1 of 1
www.pbteen.com