Ballard Designs Celeste AT602 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 5-22-2019 Page 1 of 3
PRODUCT NAME: Celeste Firescreen
ITEM NUMBER: AT602
ASSEMBLED DIMENSIONS : 30”H x 42”W x 10”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A 4
B 1
Qty. Hardware Included
Ltr.
C
D
1
2
Qty. Components
TOOLS NEEDED:
Wrench (included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
Wrench
Screen
Foot
Hex Bolt

Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
On a clean, soft, level surface invert Screen (C) and install Feet (D). Align holes in Feet with
T-nuts in base of Screen. Insert Bolt (A) and firmly tighten using Wrench (B).
(C)
(A)
(B)
(D)