peerless-AV DS-S560-B2X2 User manual

12015-06-12 #:126-9066-6 (2020-01-14)
ENG
DS-S560-B2X2
46" - 60"
(117 - 152 cm)
800 lb
(363 kg)
MAX

22015-06-12 #:126-9066-6 (2020-01-14)
ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete
installation. Before installing make sure the supporting surface will support the combined load of the equipment
and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product
may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to
safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support
please call customer care at 1-800-865-2112.
WARNING
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
Display center.
ENG
3/8"
(10mm)
3/8"
(10mm)
ENG

32015-06-12 #:126-9066-6 (2020-01-14)
Parts List
Part #
Description Qty
Apedestal 2 147-T1426
Bcolumn 2 146-T1131
Ccover 2 145-T1809
Dvertical support bracket 4 145-T1806
Eleft adaptor bracket 8 146-1609
Fright adaptor bracket 8 146-1608
Gouter support bracket 4 146-T1290
Hdual cross support 4 146-T1905
Icord bracket 4 146-T1321
JM8 x 16mm socket button screw 64 520-9527
KM8 square nut 16 530-1066
Lcover clip 8 590-0317
MM5 x 10mm type-f, socket pin screw 16 520-1164
Nknob 4 560-1160
O1/4" power bit 1 560-0263
P5mm allen wrench 1 560-9640
Qnylon shoulder washer 32 590-2233
RM6 x 12mm socket pin screw 32 520-1050
S4mm allen wrench 1 560-9646
TM6 x 35mm screw 8 520-0717
Urawl bolt #6913 8 5M9-381-H03
Parts (Before beginning, make sure you have all parts shown below).
C (2)
cover
B (2)
column
D (4)
vertical support
bracket
A (2)
pedestal F (8)
right adaptor
bracket
E (8)
left adaptor
bracket
ENG

42015-06-12 #:126-9066-6 (2020-01-14)
I (4)
cord
bracket
H (4)
dual cross
support
J (64)
M8 x 16mm
K (16)
M8 square nut
L (8)
cover clip
M (16)
M5 x 10mm
O (1)
1/4" power
bit
P (1)
5mm allen
wrench
nylon shoulder
washer
Q (32)
M6 x 12mm
R (32)
4mm allen
wrench
S (1)
rawl bolt
U (8)
M6 x 35mm
T (8)
G (4)
outer support bracket
N (4)
knob

52015-06-12 #:126-9066-6 (2020-01-14)
1
x2
T (4)
A
B

62015-06-12 #:126-9066-6 (2020-01-14)
2-1
2-2
J (8)
K (4)
D
G
1/8"
(3mm)
1/8"
(3mm)
TIGHTEN
CONNECTING
HARDWARE
DISPLAY
HEIGHT
x4
P
P

72015-06-12 #:126-9066-6 (2020-01-14)
3-1 3-2
x2 x2
I (2)
N (2)
TIGHTEN
CONNECTING
HARDWARE
TOP VIEW
IN
L (4)
C

82015-06-12 #:126-9066-6 (2020-01-14)
4
ENG - When installing Peerless mounts on a concrete oor, the oor must be at least 8" thick with a minimum
compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster,
drywall, or other nishing material.
WARNING

92015-06-12 #:126-9066-6 (2020-01-14)
4
U (8)
4-1
Align base. Mark mounting holes.
ENG
4-3
Align base. Install using concrete anchors
provided.
ENG
3/8"
(10mm)
55.00"
(1397mm)
ENG Maximum 35 ft • lb (47 N.M.).
55.00"
(1397mm)
4-2
Drill mounting holes into
supporting surface
(3" (76mm) minimum
depth required).
ENG
3/8"
(10mm)
3"
(76mm)
3/8"
(10mm)

10 2015-06-12 #:126-9066-6 (2020-01-14)
5-1
H (2)
Cross supports must center on columns.
ENG
Tighten.
ENG Tighten. ENG
TIGHTEN
CONNECTING
HARDWARE
P