Pelican M6 LITHIUM 2320 User manual

PELICANTM
All trademarks and logos displayed herein are registered and unregistered
trademarks of Pelican Products, Inc. and others.
Part #2323-311-000 © 2005 Pelican Products AP/05
PELICAN
Y o u break it, we replace it... forever.
LITHIUM
CAT. #2320
PIéCES DE RECHANGE
CAT. # DESCRIPTION
2324 Lamp Module
CARACTéRISTIQUES
AMPOULE : xénon hautement pressurisé
AUTONOMIE
DE LA PILE : plus d’une heure
PILES : (2) deux piles au lithium de 3 V
(CR-123A, DL-123A ou
modèle équivalent)
RENVOI SOUS GARANTIE
Renvoyez toutes les pièces à réparer ou à remplacer
directement au service après-vente (Customer
Service Department) de Pelican Products (en port
payé). Veuillez appeler au préalable pour obtenir
un numéro d’autorisation.
En vertu de la garantie, Pelican Products
remplacera ou réparera tout produit cassé ou
défectueux. À la réception du produit, Pelican
Products vous avisera des éventuels frais de
manutention ou de port de retour.
AUTRES PIÈCES -
APPELEZ LE SERVICE APRÈS-VENTE
Si votre détaillant local ne vend pas de pièces
accessoires, vous pouvez les commander directement
auprès de Pelican Products. Veuillez envoyer un
chèque ou un mandat en dollars américains, ou
commander par téléphone avec une carte MasterCard
ou Visa (demandez le service après-vente). NOUS
N’ACCEPTONS PAS LES COMMANDES CONTRE
REMBOURSEMENT. Les résidents de Californie
sont redevables d’une taxe sur les ventes de
8,25 %. Le délai de livraison est de 2 à 3 semaines
environ. Les frais de port et de manutention sont
à la charge de Pelican Products. LE PORT N’EST
PAYÉ QUE POUR LES ENVOIS À L’INTÉRIEUR DU
TERRITOIRE AMÉRICAIN.
Garantie inconditionnelle d’excellence
à vie de Pelican
Si, pour une raison quelconque, vous n’êtes pas satisfait de
la qualité ou de la performance de la TORCHE ÉLECTRIQUE
PELICAN, PELICAN PRODUCTS se fera un plaisir de remplacer
le produit ou de vous rembourser votre achat (à votre choix)
dans les 30 jours suivant l’achat auprès du détaillant d’origine.
PELICAN PRODUCTS continuera de garantir la torche électrique
à vie contre la casse ou les défauts de fabrication. La garantie
ne couvre ni l’ampoule ni les piles. Les joints toriques doivent
être graissés (et remplacés s’ils sont endommagés) selon le
mode d’emploi du produit. (Remplacez les joints toriques
annuellement ou plus tôt s’ils sont endommagés.) Toute
responsabilité, expresse ou implicite, est limitée au remplace-
ment de la torche. Cette garantie est annulée uniquement dans
le cas où la TORCHE ÉLECTRIQUE PELICAN aurait été soumise
à un usage abusif, au-delà d’une utilisation normale.
La garantie ci-dessus ne couvre pas les dégâts causés par des
morsures de requin, des attaques d’ours ni par des enfants de
moins de 5 ans.
M6
INSTRUCTION
MANUAL
THE WORLD’S BRIGHTEST
COMPACT XENON FLASHLIGHT
BUILT FOR POLICE, MILITARY,
SECURITY FORCES, EMERGENCY
SERVICES AND OTHER
PROFESSIONALS.
INTRODUCTION
This compact flashlight produces an ultra
bright light beam by using a Xenon bulb
powered by (2) two 3 volt CR-123A lithium
batteries. The M6 flashlight is designed for
easy use with one hand operation and has
a dual-switch mode for constant-on and
momentary-on. The M6 flashlight body is
made by high precision CNC machines from
aircraft-grade aluminum alloy for the most
durable construction. The M6 flashlight is
water resistant.
TO INSERT BATTERIES
WARNING: Always replace both batteries at
the same time. Do no mix brands or old and
new batteries. Lithium batteries can explode
if these rules are not followed.
1. Remove the tail cap by turning
counter-clockwise.
2. Install (2) two CR-123A lithium batteries
with + terminal facing to the head
assembly.
3. Replace the tail cap onto the
flashlight by turning clockwise.
OPERATION
1. CONSTANT-ON ---- Press the tail
button to turn ON.
2. LIGHT-OFF ---- Press the tail button
to turn OFF.
3. MOMENTARY ---- Gently depress the tail
button for momentary operation.
STORING
If the M6 flashlight will not be used for a
short time, turn the tail cap counter-clock-
wise until the rubber push button switch
does not function.
LAMP MODULE
REPLACEMENT
1. Be sure the tail cap is in the OFF position.
2. Grip the faceted head with one hand and
unscrew the circular lens bezel with the
other hand.
3. Remove the old lamp module and insert
the new assembly.
4. Replace the circular bezel and tighten.
5. Check to ensure that the faceted head is
screwed down tight.
TO CHANGE BATTERIES
1. Remove the tail cap by turning counter-
clockwise until it comes off the rear of
the M6 flashlight.
2. Remove the (2) two used batteries from
the M6 flashlight.
3. Install the (2) two new CR123A or
DL-123A with + terminal facing to the
head assembly.
4. Replace the tail cap by turning clockwise.
GENERAL CARE AND
MAINTENANCE
1. Clean o-rings with a soft clean cloth to
insure that sealing area is free of dirt
that could destroy the o-ring seal.
2. Apply a light coat of clear silicone grease
on the o-rings occasionally if turning
action becomes too difficult.
3. Remove the tail cap and wipe the rear
threads of the M6 flashlight body and
inside of the tail cap with a soft clean
cloth occasionally to avoid intermittent
flashlight operation.
WARNING
Always replace both batteries at the same
time. Do not mix brands or old and new
batteries. Lithium batteries can explode
or cause burns if shorted, disassembled,
recharged or exposed to fire or high
temperatures. Please handle with care.
O-RING MAINTENANCE
Check closely for cuts, scratches, or other-
wise damaged O-ring or mating lens lip
surface. Remove any dirt or foreign matter
from O-ring sealing surfaces. Keep threads,
O-ring groove and inside lip of lens lubri-
cated with silicone grease. See Warranty
information for replacement of O-ring.
CAUTION
To prevent the M6 flashlight coming on
accidentally when the flashlight is stored,
remove the battery or turn the tail cap
counter-clockwise until the rubber push
button switch does not function. If the M6
flashlight is turned on while it is in a container,
the flashlight can overheat and damage the
flashlight or the material of the surrounding area.
REPLACEMENT PARTS
CAT. # DESCRIPTION
2324 Lamp Module
SPECIFICATIONS
BULB: High Pressure Xenon
BATTERY LIFE: Approximately 1 hour
BATTERY: (2) Two 3 volt CR-123A,
DL-123A or other equivalent
lithium batteries
WARRANTY RETURN POLICY
Send all items for repair or replacement
directly to Pelican Products Customer Service
Department (Postage Paid). Please call for
authorization number.
Per our guarantee, Pelican Products will
replace or repair any broken or defective
products. Upon receipt of goods, Pelican
Products will notify you of any handling and
return postage charges.
OTHER PARTS ---
CALL CUSTOMER SERVICE DEPT.
If your local retailer does not stock accessory
parts, you may order them directly from Pelican
Products. Send check or money order in U.S.
dollars, or order by phone using MasterCard
or Visa (ask for customer service). SORRY NO
C.O.D.’S. California residents add 81/4% sales
tax. Allow 2-3 weeks delivery time. Pelican
Products pays postage and handling charges.
POSTAGE PAID FOR U.S. ZIP CODE AREAS
ONLY.
Pelican Unconditional Lifetime
Guarantee of Excellence
If for any reason you are not satisfied with the
quality or performance of any PELICAN product, we
will gladly replace the product or refund your money
(at your option) within 30 days of purchase through
the original retailer/dealer. PELICAN PRODUCTS will
continue to guarantee the product directly for a
lifetime against breakage or defects in workmanship.
Lifetime guarantee does not cover the lamp or batter-
ies. The o-rings must be kept greased (and replaced if
damaged) per product instructions. This guarantee
is void only if the PELICAN product has been abused
beyond normal and sensible wear and tear.
THE ABOVE GUARANTEE DOES NOT COVER
SHARKBITE, BEAR ATTACK OR CHILDREN UNDER 5.
23215 Early Ave. • Torrance, CA 90505 USA
Tel [phone] • FAX [phone] • www.pelican.com
PELICANTM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4 • Tel [phone]
FAX [phone]
PELI TM PRODUCTS, S.A.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel [phone] • FAX [phone] • www.peli.com

PELICANTM
All trademarks and logos displayed herein are registered and unregistered
trademarks of Pelican Products, Inc. and others.
Part #2323-311-000 © 2005 Pelican Products AP/05
PELICAN
Y o u break it, we replace it... forever.
LITHIUM
CAT. #2320
PIéCES DE RECHANGE
CAT. # DESCRIPTION
2324 Lamp Module
CARACTéRISTIQUES
AMPOULE : xénon hautement pressurisé
AUTONOMIE
DE LA PILE : plus d’une heure
PILES : (2) deux piles au lithium de 3 V
(CR-123A, DL-123A ou
modèle équivalent)
RENVOI SOUS GARANTIE
Renvoyez toutes les pièces à réparer ou à remplacer
directement au service après-vente (Customer
Service Department) de Pelican Products (en port
payé). Veuillez appeler au préalable pour obtenir
un numéro d’autorisation.
En vertu de la garantie, Pelican Products
remplacera ou réparera tout produit cassé ou
défectueux. À la réception du produit, Pelican
Products vous avisera des éventuels frais de
manutention ou de port de retour.
AUTRES PIÈCES -
APPELEZ LE SERVICE APRÈS-VENTE
Si votre détaillant local ne vend pas de pièces
accessoires, vous pouvez les commander directement
auprès de Pelican Products. Veuillez envoyer un
chèque ou un mandat en dollars américains, ou
commander par téléphone avec une carte MasterCard
ou Visa (demandez le service après-vente). NOUS
N’ACCEPTONS PAS LES COMMANDES CONTRE
REMBOURSEMENT. Les résidents de Californie
sont redevables d’une taxe sur les ventes de
8,25 %. Le délai de livraison est de 2 à 3 semaines
environ. Les frais de port et de manutention sont
à la charge de Pelican Products. LE PORT N’EST
PAYÉ QUE POUR LES ENVOIS À L’INTÉRIEUR DU
TERRITOIRE AMÉRICAIN.
Garantie inconditionnelle d’excellence
à vie de Pelican
Si, pour une raison quelconque, vous n’êtes pas satisfait de
la qualité ou de la performance de la TORCHE ÉLECTRIQUE
PELICAN, PELICAN PRODUCTS se fera un plaisir de remplacer
le produit ou de vous rembourser votre achat (à votre choix)
dans les 30 jours suivant l’achat auprès du détaillant d’origine.
PELICAN PRODUCTS continuera de garantir la torche électrique
à vie contre la casse ou les défauts de fabrication. La garantie
ne couvre ni l’ampoule ni les piles. Les joints toriques doivent
être graissés (et remplacés s’ils sont endommagés) selon le
mode d’emploi du produit. (Remplacez les joints toriques
annuellement ou plus tôt s’ils sont endommagés.) Toute
responsabilité, expresse ou implicite, est limitée au remplace-
ment de la torche. Cette garantie est annulée uniquement dans
le cas où la TORCHE ÉLECTRIQUE PELICAN aurait été soumise
à un usage abusif, au-delà d’une utilisation normale.
La garantie ci-dessus ne couvre pas les dégâts causés par des
morsures de requin, des attaques d’ours ni par des enfants de
moins de 5 ans.
M6
INSTRUCTION
MANUAL
THE WORLD’S BRIGHTEST
COMPACT XENON FLASHLIGHT
BUILT FOR POLICE, MILITARY,
SECURITY FORCES, EMERGENCY
SERVICES AND OTHER
PROFESSIONALS.
INTRODUCTION
This compact flashlight produces an ultra
bright light beam by using a Xenon bulb
powered by (2) two 3 volt CR-123A lithium
batteries. The M6 flashlight is designed for
easy use with one hand operation and has
a dual-switch mode for constant-on and
momentary-on. The M6 flashlight body is
made by high precision CNC machines from
aircraft-grade aluminum alloy for the most
durable construction. The M6 flashlight is
water resistant.
TO INSERT BATTERIES
WARNING: Always replace both batteries at
the same time. Do no mix brands or old and
new batteries. Lithium batteries can explode
if these rules are not followed.
1. Remove the tail cap by turning
counter-clockwise.
2. Install (2) two CR-123A lithium batteries
with + terminal facing to the head
assembly.
3. Replace the tail cap onto the
flashlight by turning clockwise.
OPERATION
1. CONSTANT-ON ---- Press the tail
button to turn ON.
2. LIGHT-OFF ---- Press the tail button
to turn OFF.
3. MOMENTARY ---- Gently depress the tail
button for momentary operation.
STORING
If the M6 flashlight will not be used for a
short time, turn the tail cap counter-clock-
wise until the rubber push button switch
does not function.
LAMP MODULE
REPLACEMENT
1. Be sure the tail cap is in the OFF position.
2. Grip the faceted head with one hand and
unscrew the circular lens bezel with the
other hand.
3. Remove the old lamp module and insert
the new assembly.
4. Replace the circular bezel and tighten.
5. Check to ensure that the faceted head is
screwed down tight.
TO CHANGE BATTERIES
1. Remove the tail cap by turning counter-
clockwise until it comes off the rear of
the M6 flashlight.
2. Remove the (2) two used batteries from
the M6 flashlight.
3. Install the (2) two new CR123A or
DL-123A with + terminal facing to the
head assembly.
4. Replace the tail cap by turning clockwise.
GENERAL CARE AND
MAINTENANCE
1. Clean o-rings with a soft clean cloth to
insure that sealing area is free of dirt
that could destroy the o-ring seal.
2. Apply a light coat of clear silicone grease
on the o-rings occasionally if turning
action becomes too difficult.
3. Remove the tail cap and wipe the rear
threads of the M6 flashlight body and
inside of the tail cap with a soft clean
cloth occasionally to avoid intermittent
flashlight operation.
WARNING
Always replace both batteries at the same
time. Do not mix brands or old and new
batteries. Lithium batteries can explode
or cause burns if shorted, disassembled,
recharged or exposed to fire or high
temperatures. Please handle with care.
O-RING MAINTENANCE
Check closely for cuts, scratches, or other-
wise damaged O-ring or mating lens lip
surface. Remove any dirt or foreign matter
from O-ring sealing surfaces. Keep threads,
O-ring groove and inside lip of lens lubri-
cated with silicone grease. See Warranty
information for replacement of O-ring.
CAUTION
To prevent the M6 flashlight coming on
accidentally when the flashlight is stored,
remove the battery or turn the tail cap
counter-clockwise until the rubber push
button switch does not function. If the M6
flashlight is turned on while it is in a container,
the flashlight can overheat and damage the
flashlight or the material of the surrounding area.
REPLACEMENT PARTS
CAT. # DESCRIPTION
2324 Lamp Module
SPECIFICATIONS
BULB: High Pressure Xenon
BATTERY LIFE: Approximately 1 hour
BATTERY: (2) Two 3 volt CR-123A,
DL-123A or other equivalent
lithium batteries
WARRANTY RETURN POLICY
Send all items for repair or replacement
directly to Pelican Products Customer Service
Department (Postage Paid). Please call for
authorization number.
Per our guarantee, Pelican Products will
replace or repair any broken or defective
products. Upon receipt of goods, Pelican
Products will notify you of any handling and
return postage charges.
OTHER PARTS ---
CALL CUSTOMER SERVICE DEPT.
If your local retailer does not stock accessory
parts, you may order them directly from Pelican
Products. Send check or money order in U.S.
dollars, or order by phone using MasterCard
or Visa (ask for customer service). SORRY NO
C.O.D.’S. California residents add 81/4% sales
tax. Allow 2-3 weeks delivery time. Pelican
Products pays postage and handling charges.
POSTAGE PAID FOR U.S. ZIP CODE AREAS
ONLY.
Pelican Unconditional Lifetime
Guarantee of Excellence
If for any reason you are not satisfied with the
quality or performance of any PELICAN product, we
will gladly replace the product or refund your money
(at your option) within 30 days of purchase through
the original retailer/dealer. PELICAN PRODUCTS will
continue to guarantee the product directly for a
lifetime against breakage or defects in workmanship.
Lifetime guarantee does not cover the lamp or batter-
ies. The o-rings must be kept greased (and replaced if
damaged) per product instructions. This guarantee
is void only if the PELICAN product has been abused
beyond normal and sensible wear and tear.
THE ABOVE GUARANTEE DOES NOT COVER
SHARKBITE, BEAR ATTACK OR CHILDREN UNDER 5.
23215 Early Ave. • Torrance, CA 90505 USA
Tel [phone] • FAX [phone] • www.pelican.com
PELICANTM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4 • Tel [phone]
FAX [phone]
PELI TM PRODUCTS, S.A.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel [phone] • FAX [phone] • www.peli.com

PELICANTM
All trademarks and logos displayed herein are registered and unregistered
trademarks of Pelican Products, Inc. and others.
Part #2323-311-000 © 2005 Pelican Products AP/05
PELICAN
Y o u break it, we replace it... forever.
LITHIUM
CAT. #2320
PIéCES DE RECHANGE
CAT. # DESCRIPTION
2324 Lamp Module
CARACTéRISTIQUES
AMPOULE : xénon hautement pressurisé
AUTONOMIE
DE LA PILE : plus d’une heure
PILES : (2) deux piles au lithium de 3 V
(CR-123A, DL-123A ou
modèle équivalent)
RENVOI SOUS GARANTIE
Renvoyez toutes les pièces à réparer ou à remplacer
directement au service après-vente (Customer
Service Department) de Pelican Products (en port
payé). Veuillez appeler au préalable pour obtenir
un numéro d’autorisation.
En vertu de la garantie, Pelican Products
remplacera ou réparera tout produit cassé ou
défectueux. À la réception du produit, Pelican
Products vous avisera des éventuels frais de
manutention ou de port de retour.
AUTRES PIÈCES -
APPELEZ LE SERVICE APRÈS-VENTE
Si votre détaillant local ne vend pas de pièces
accessoires, vous pouvez les commander directement
auprès de Pelican Products. Veuillez envoyer un
chèque ou un mandat en dollars américains, ou
commander par téléphone avec une carte MasterCard
ou Visa (demandez le service après-vente). NOUS
N’ACCEPTONS PAS LES COMMANDES CONTRE
REMBOURSEMENT. Les résidents de Californie
sont redevables d’une taxe sur les ventes de
8,25 %. Le délai de livraison est de 2 à 3 semaines
environ. Les frais de port et de manutention sont
à la charge de Pelican Products. LE PORT N’EST
PAYÉ QUE POUR LES ENVOIS À L’INTÉRIEUR DU
TERRITOIRE AMÉRICAIN.
Garantie inconditionnelle d’excellence
à vie de Pelican
Si, pour une raison quelconque, vous n’êtes pas satisfait de
la qualité ou de la performance de la TORCHE ÉLECTRIQUE
PELICAN, PELICAN PRODUCTS se fera un plaisir de remplacer
le produit ou de vous rembourser votre achat (à votre choix)
dans les 30 jours suivant l’achat auprès du détaillant d’origine.
PELICAN PRODUCTS continuera de garantir la torche électrique
à vie contre la casse ou les défauts de fabrication. La garantie
ne couvre ni l’ampoule ni les piles. Les joints toriques doivent
être graissés (et remplacés s’ils sont endommagés) selon le
mode d’emploi du produit. (Remplacez les joints toriques
annuellement ou plus tôt s’ils sont endommagés.) Toute
responsabilité, expresse ou implicite, est limitée au remplace-
ment de la torche. Cette garantie est annulée uniquement dans
le cas où la TORCHE ÉLECTRIQUE PELICAN aurait été soumise
à un usage abusif, au-delà d’une utilisation normale.
La garantie ci-dessus ne couvre pas les dégâts causés par des
morsures de requin, des attaques d’ours ni par des enfants de
moins de 5 ans.
M6
INSTRUCTION
MANUAL
THE WORLD’S BRIGHTEST
COMPACT XENON FLASHLIGHT
BUILT FOR POLICE, MILITARY,
SECURITY FORCES, EMERGENCY
SERVICES AND OTHER
PROFESSIONALS.
INTRODUCTION
This compact flashlight produces an ultra
bright light beam by using a Xenon bulb
powered by (2) two 3 volt CR-123A lithium
batteries. The M6 flashlight is designed for
easy use with one hand operation and has
a dual-switch mode for constant-on and
momentary-on. The M6 flashlight body is
made by high precision CNC machines from
aircraft-grade aluminum alloy for the most
durable construction. The M6 flashlight is
water resistant.
TO INSERT BATTERIES
WARNING: Always replace both batteries at
the same time. Do no mix brands or old and
new batteries. Lithium batteries can explode
if these rules are not followed.
1. Remove the tail cap by turning
counter-clockwise.
2. Install (2) two CR-123A lithium batteries
with + terminal facing to the head
assembly.
3. Replace the tail cap onto the
flashlight by turning clockwise.
OPERATION
1. CONSTANT-ON ---- Press the tail
button to turn ON.
2. LIGHT-OFF ---- Press the tail button
to turn OFF.
3. MOMENTARY ---- Gently depress the tail
button for momentary operation.
STORING
If the M6 flashlight will not be used for a
short time, turn the tail cap counter-clock-
wise until the rubber push button switch
does not function.
LAMP MODULE
REPLACEMENT
1. Be sure the tail cap is in the OFF position.
2. Grip the faceted head with one hand and
unscrew the circular lens bezel with the
other hand.
3. Remove the old lamp module and insert
the new assembly.
4. Replace the circular bezel and tighten.
5. Check to ensure that the faceted head is
screwed down tight.
TO CHANGE BATTERIES
1. Remove the tail cap by turning counter-
clockwise until it comes off the rear of
the M6 flashlight.
2. Remove the (2) two used batteries from
the M6 flashlight.
3. Install the (2) two new CR123A or
DL-123A with + terminal facing to the
head assembly.
4. Replace the tail cap by turning clockwise.
GENERAL CARE AND
MAINTENANCE
1. Clean o-rings with a soft clean cloth to
insure that sealing area is free of dirt
that could destroy the o-ring seal.
2. Apply a light coat of clear silicone grease
on the o-rings occasionally if turning
action becomes too difficult.
3. Remove the tail cap and wipe the rear
threads of the M6 flashlight body and
inside of the tail cap with a soft clean
cloth occasionally to avoid intermittent
flashlight operation.
WARNING
Always replace both batteries at the same
time. Do not mix brands or old and new
batteries. Lithium batteries can explode
or cause burns if shorted, disassembled,
recharged or exposed to fire or high
temperatures. Please handle with care.
O-RING MAINTENANCE
Check closely for cuts, scratches, or other-
wise damaged O-ring or mating lens lip
surface. Remove any dirt or foreign matter
from O-ring sealing surfaces. Keep threads,
O-ring groove and inside lip of lens lubri-
cated with silicone grease. See Warranty
information for replacement of O-ring.
CAUTION
To prevent the M6 flashlight coming on
accidentally when the flashlight is stored,
remove the battery or turn the tail cap
counter-clockwise until the rubber push
button switch does not function. If the M6
flashlight is turned on while it is in a container,
the flashlight can overheat and damage the
flashlight or the material of the surrounding area.
REPLACEMENT PARTS
CAT. # DESCRIPTION
2324 Lamp Module
SPECIFICATIONS
BULB: High Pressure Xenon
BATTERY LIFE: Approximately 1 hour
BATTERY: (2) Two 3 volt CR-123A,
DL-123A or other equivalent
lithium batteries
WARRANTY RETURN POLICY
Send all items for repair or replacement
directly to Pelican Products Customer Service
Department (Postage Paid). Please call for
authorization number.
Per our guarantee, Pelican Products will
replace or repair any broken or defective
products. Upon receipt of goods, Pelican
Products will notify you of any handling and
return postage charges.
OTHER PARTS ---
CALL CUSTOMER SERVICE DEPT.
If your local retailer does not stock accessory
parts, you may order them directly from Pelican
Products. Send check or money order in U.S.
dollars, or order by phone using MasterCard
or Visa (ask for customer service). SORRY NO
C.O.D.’S. California residents add 81/4% sales
tax. Allow 2-3 weeks delivery time. Pelican
Products pays postage and handling charges.
POSTAGE PAID FOR U.S. ZIP CODE AREAS
ONLY.
Pelican Unconditional Lifetime
Guarantee of Excellence
If for any reason you are not satisfied with the
quality or performance of any PELICAN product, we
will gladly replace the product or refund your money
(at your option) within 30 days of purchase through
the original retailer/dealer. PELICAN PRODUCTS will
continue to guarantee the product directly for a
lifetime against breakage or defects in workmanship.
Lifetime guarantee does not cover the lamp or batter-
ies. The o-rings must be kept greased (and replaced if
damaged) per product instructions. This guarantee
is void only if the PELICAN product has been abused
beyond normal and sensible wear and tear.
THE ABOVE GUARANTEE DOES NOT COVER
SHARKBITE, BEAR ATTACK OR CHILDREN UNDER 5.
23215 Early Ave. • Torrance, CA 90505 USA
Tel [phone] • FAX [phone] • www.pelican.com
PELICANTM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4 • Tel [phone]
FAX [phone]
PELI TM PRODUCTS, S.A.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel [phone] • FAX [phone] • www.peli.com

PELICANTM
All trademarks and logos displayed herein are registered and unregistered
trademarks of Pelican Products, Inc. and others.
Part #2323-311-000 © 2005 Pelican Products AP/05
PELICAN
Y o u break it, we replace it... forever.
LITHIUM
CAT. #2320
PIéCES DE RECHANGE
CAT. # DESCRIPTION
2324 Lamp Module
CARACTéRISTIQUES
AMPOULE : xénon hautement pressurisé
AUTONOMIE
DE LA PILE : plus d’une heure
PILES : (2) deux piles au lithium de 3 V
(CR-123A, DL-123A ou
modèle équivalent)
RENVOI SOUS GARANTIE
Renvoyez toutes les pièces à réparer ou à remplacer
directement au service après-vente (Customer
Service Department) de Pelican Products (en port
payé). Veuillez appeler au préalable pour obtenir
un numéro d’autorisation.
En vertu de la garantie, Pelican Products
remplacera ou réparera tout produit cassé ou
défectueux. À la réception du produit, Pelican
Products vous avisera des éventuels frais de
manutention ou de port de retour.
AUTRES PIÈCES -
APPELEZ LE SERVICE APRÈS-VENTE
Si votre détaillant local ne vend pas de pièces
accessoires, vous pouvez les commander directement
auprès de Pelican Products. Veuillez envoyer un
chèque ou un mandat en dollars américains, ou
commander par téléphone avec une carte MasterCard
ou Visa (demandez le service après-vente). NOUS
N’ACCEPTONS PAS LES COMMANDES CONTRE
REMBOURSEMENT. Les résidents de Californie
sont redevables d’une taxe sur les ventes de
8,25 %. Le délai de livraison est de 2 à 3 semaines
environ. Les frais de port et de manutention sont
à la charge de Pelican Products. LE PORT N’EST
PAYÉ QUE POUR LES ENVOIS À L’INTÉRIEUR DU
TERRITOIRE AMÉRICAIN.
Garantie inconditionnelle d’excellence
à vie de Pelican
Si, pour une raison quelconque, vous n’êtes pas satisfait de
la qualité ou de la performance de la TORCHE ÉLECTRIQUE
PELICAN, PELICAN PRODUCTS se fera un plaisir de remplacer
le produit ou de vous rembourser votre achat (à votre choix)
dans les 30 jours suivant l’achat auprès du détaillant d’origine.
PELICAN PRODUCTS continuera de garantir la torche électrique
à vie contre la casse ou les défauts de fabrication. La garantie
ne couvre ni l’ampoule ni les piles. Les joints toriques doivent
être graissés (et remplacés s’ils sont endommagés) selon le
mode d’emploi du produit. (Remplacez les joints toriques
annuellement ou plus tôt s’ils sont endommagés.) Toute
responsabilité, expresse ou implicite, est limitée au remplace-
ment de la torche. Cette garantie est annulée uniquement dans
le cas où la TORCHE ÉLECTRIQUE PELICAN aurait été soumise
à un usage abusif, au-delà d’une utilisation normale.
La garantie ci-dessus ne couvre pas les dégâts causés par des
morsures de requin, des attaques d’ours ni par des enfants de
moins de 5 ans.
M6
INSTRUCTION
MANUAL
THE WORLD’S BRIGHTEST
COMPACT XENON FLASHLIGHT
BUILT FOR POLICE, MILITARY,
SECURITY FORCES, EMERGENCY
SERVICES AND OTHER
PROFESSIONALS.
INTRODUCTION
This compact flashlight produces an ultra
bright light beam by using a Xenon bulb
powered by (2) two 3 volt CR-123A lithium
batteries. The M6 flashlight is designed for
easy use with one hand operation and has
a dual-switch mode for constant-on and
momentary-on. The M6 flashlight body is
made by high precision CNC machines from
aircraft-grade aluminum alloy for the most
durable construction. The M6 flashlight is
water resistant.
TO INSERT BATTERIES
WARNING: Always replace both batteries at
the same time. Do no mix brands or old and
new batteries. Lithium batteries can explode
if these rules are not followed.
1. Remove the tail cap by turning
counter-clockwise.
2. Install (2) two CR-123A lithium batteries
with + terminal facing to the head
assembly.
3. Replace the tail cap onto the
flashlight by turning clockwise.
OPERATION
1. CONSTANT-ON ---- Press the tail
button to turn ON.
2. LIGHT-OFF ---- Press the tail button
to turn OFF.
3. MOMENTARY ---- Gently depress the tail
button for momentary operation.
STORING
If the M6 flashlight will not be used for a
short time, turn the tail cap counter-clock-
wise until the rubber push button switch
does not function.
LAMP MODULE
REPLACEMENT
1. Be sure the tail cap is in the OFF position.
2. Grip the faceted head with one hand and
unscrew the circular lens bezel with the
other hand.
3. Remove the old lamp module and insert
the new assembly.
4. Replace the circular bezel and tighten.
5. Check to ensure that the faceted head is
screwed down tight.
TO CHANGE BATTERIES
1. Remove the tail cap by turning counter-
clockwise until it comes off the rear of
the M6 flashlight.
2. Remove the (2) two used batteries from
the M6 flashlight.
3. Install the (2) two new CR123A or
DL-123A with + terminal facing to the
head assembly.
4. Replace the tail cap by turning clockwise.
GENERAL CARE AND
MAINTENANCE
1. Clean o-rings with a soft clean cloth to
insure that sealing area is free of dirt
that could destroy the o-ring seal.
2. Apply a light coat of clear silicone grease
on the o-rings occasionally if turning
action becomes too difficult.
3. Remove the tail cap and wipe the rear
threads of the M6 flashlight body and
inside of the tail cap with a soft clean
cloth occasionally to avoid intermittent
flashlight operation.
WARNING
Always replace both batteries at the same
time. Do not mix brands or old and new
batteries. Lithium batteries can explode
or cause burns if shorted, disassembled,
recharged or exposed to fire or high
temperatures. Please handle with care.
O-RING MAINTENANCE
Check closely for cuts, scratches, or other-
wise damaged O-ring or mating lens lip
surface. Remove any dirt or foreign matter
from O-ring sealing surfaces. Keep threads,
O-ring groove and inside lip of lens lubri-
cated with silicone grease. See Warranty
information for replacement of O-ring.
CAUTION
To prevent the M6 flashlight coming on
accidentally when the flashlight is stored,
remove the battery or turn the tail cap
counter-clockwise until the rubber push
button switch does not function. If the M6
flashlight is turned on while it is in a container,
the flashlight can overheat and damage the
flashlight or the material of the surrounding area.
REPLACEMENT PARTS
CAT. # DESCRIPTION
2324 Lamp Module
SPECIFICATIONS
BULB: High Pressure Xenon
BATTERY LIFE: Approximately 1 hour
BATTERY: (2) Two 3 volt CR-123A,
DL-123A or other equivalent
lithium batteries
WARRANTY RETURN POLICY
Send all items for repair or replacement
directly to Pelican Products Customer Service
Department (Postage Paid). Please call for
authorization number.
Per our guarantee, Pelican Products will
replace or repair any broken or defective
products. Upon receipt of goods, Pelican
Products will notify you of any handling and
return postage charges.
OTHER PARTS ---
CALL CUSTOMER SERVICE DEPT.
If your local retailer does not stock accessory
parts, you may order them directly from Pelican
Products. Send check or money order in U.S.
dollars, or order by phone using MasterCard
or Visa (ask for customer service). SORRY NO
C.O.D.’S. California residents add 81/4% sales
tax. Allow 2-3 weeks delivery time. Pelican
Products pays postage and handling charges.
POSTAGE PAID FOR U.S. ZIP CODE AREAS
ONLY.
Pelican Unconditional Lifetime
Guarantee of Excellence
If for any reason you are not satisfied with the
quality or performance of any PELICAN product, we
will gladly replace the product or refund your money
(at your option) within 30 days of purchase through
the original retailer/dealer. PELICAN PRODUCTS will
continue to guarantee the product directly for a
lifetime against breakage or defects in workmanship.
Lifetime guarantee does not cover the lamp or batter-
ies. The o-rings must be kept greased (and replaced if
damaged) per product instructions. This guarantee
is void only if the PELICAN product has been abused
beyond normal and sensible wear and tear.
THE ABOVE GUARANTEE DOES NOT COVER
SHARKBITE, BEAR ATTACK OR CHILDREN UNDER 5.
23215 Early Ave. • Torrance, CA 90505 USA
Tel [phone] • FAX [phone] • www.pelican.com
PELICANTM CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4 • Tel [phone]
FAX [phone]
PELI TM PRODUCTS, S.A.
c/ Casp, 33-B Pral. • 08010 • Barcelona, Spain
Tel [phone] • FAX [phone] • www.peli.com