Pentair FLECK 125 User manual

COMPONENTS
A) Pentair® Fleck 125 In-And-Out Valve
B) Bypass
C) Connector
B
A
B
1
3
4
4
3
2
1
2
TITLE
SIZE
SCALE
SHEET 1 OF 1
DWG NO.
REV
Pentair Residential
Filtration, LLC
CHECKED
APPROVED
APPROVALS
DATE
THIRD ANGLE
PROJECTION
DRAWN
B
1:2
REVISIONS
DATE
APP'D
DESCRIPTION
REV.
PCO
ZONE
A
DO NOT SCALE DRAWING. DIMS. ARE IN INCHES [mm]
INTERPRET DIMS AND TOLERANCES PER ASME Y14.5M -2009
UNLESS OTHERWISE SPECIFIED:
ALL FINISHED MACHINED SURFACES 125 OR BETTER.
TOLERANCES:
ANGLES : 1
1 PLACE .X: .015 [0.38]
2 PLACE .XX:
.01 [0.3]
3 PLACE .XXX: .005 [0.13]
BR42887
THIS DOCUMENT IS SOLELY THE PROPERTY OF PENTAIR
RESIDENTIAL FILTRATION, LLC. REPRODUCTION, USE
DISCLOSURE, OR TRANSMISSION OF THIS DOCUMENT OR
DETAILS CONTAINED HEREIN, IN PART OR IN WHOLE, IS
PROHIBITED WITHOUT THE WRITTEN CONSENT OF PENTAIR
RESIDENTIAL FILTRATION, LLC ENGINEERING. THIS
DOCUMENT AND ANY COPIES SHALL BE RETURNED TO
PENTAIR RESIDENTIAL FILTRATION, LLC UPON REQUEST.
COMPONENTS / ASSEMBLIES TO BE COMPLIANT AND COMPATIBLE WITH EUROPEAN UNION DIRECTIVE 2011/65/EEC (RoHS2) & REGULATION (EC)1907/2006 (REACH) REQUIREMENTS
B
A
B
1
3
4
4
3
2
1
2
TITLE
SIZE
SCALE
SHEET 1 OF 1
DWG NO.
REV
Pentair Residential
Filtration, LLC
CHECKED
APPROVED
APPROVALS
DATE
THIRD ANGLE
PROJECTION
DRAWN
B
1:2
REVISIONS
DATE
APP'D
DESCRIPTION
REV.
PCO
ZONE
A
DO NOT SCALE DRAWING. DIMS. ARE IN INCHES [mm]
INTERPRET DIMS AND TOLERANCES PER ASME Y14.5M -2009
UNLESS OTHERWISE SPECIFIED:
ALL FINISHED MACHINED SURFACES 125 OR BETTER.
TOLERANCES:
ANGLES : 1
1 PLACE .X: .015 [0.38]
2 PLACE .XX:
.01 [0.3]
3 PLACE .XXX: .005 [0.13]
BR42887
THIS DOCUMENT IS SOLELY THE PROPERTY OF PENTAIR
RESIDENTIAL FILTRATION, LLC. REPRODUCTION, USE
DISCLOSURE, OR TRANSMISSION OF THIS DOCUMENT OR
DETAILS CONTAINED HEREIN, IN PART OR IN WHOLE, IS
PROHIBITED WITHOUT THE WRITTEN CONSENT OF PENTAIR
RESIDENTIAL FILTRATION, LLC ENGINEERING. THIS
DOCUMENT AND ANY COPIES SHALL BE RETURNED TO
PENTAIR RESIDENTIAL FILTRATION, LLC UPON REQUEST.
COMPONENTS / ASSEMBLIES TO BE COMPLIANT AND COMPATIBLE WITH EUROPEAN UNION DIRECTIVE 2011/65/EEC (RoHS2) & REGULATION (EC)1907/2006 (REACH) REQUIREMENTS
B
A
B
1
3
4
4
3
2
1
2
TITLE
SIZE
SCALE
SHEET 1 OF 1
DWG NO.
REV
Pentair Residential
Filtration, LLC
CHECKED
APPROVED
APPROVALS
DATE
THIRD ANGLE
PROJECTION
DRAWN
B
1:2
REVISIONS
DATE
APP'D
DESCRIPTION
REV.
PCO
ZONE
A
DO NOT SCALE DRAWING. DIMS. ARE IN INCHES [mm]
INTERPRET DIMS AND TOLERANCES PER ASME Y14.5M -2009
UNLESS OTHERWISE SPECIFIED:
ALL FINISHED MACHINED SURFACES 125 OR BETTER.
TOLERANCES:
ANGLES : 1
1 PLACE .X: .015 [0.38]
2 PLACE .XX: .01 [0.3]
3 PLACE .XXX: .005 [0.13]
BR42887
THIS DOCUMENT IS SOLELY THE PROPERTY OF PENTAIR
RESIDENTIAL FILTRATION, LLC. REPRODUCTION, USE
DISCLOSURE, OR TRANSMISSION OF THIS DOCUMENT OR
DETAILS CONTAINED HEREIN, IN PART OR IN WHOLE, IS
PROHIBITED WITHOUT THE WRITTEN CONSENT OF PENTAIR
RESIDENTIAL FILTRATION, LLC ENGINEERING. THIS
DOCUMENT AND ANY COPIES SHALL BE RETURNED TO
PENTAIR RESIDENTIAL FILTRATION, LLC UPON REQUEST.
COMPONENTS / ASSEMBLIES TO BE COMPLIANT AND COMPATIBLE WITH EUROPEAN UNION DIRECTIVE 2011/65/EEC (RoHS2) & REGULATION (EC)1907/2006 (REACH) REQUIREMENTS
A B C
PRODUCT SPECIFICATIONS AND OPERATION
Specication Description
Minimum Pressure 20 PSI
Maximum Pressure 125 PSI
Minimum Water Temperature 34°F (1°C)
Maximum Water Temperature 110°F (43°C)
Minimum Ambient Temperature 34°F (1°C)
Maximum Ambient Temperature 125°F (52°C)
Flow Rate 62134-01 62134-02
Downow Upow Downow Upow
Continuous
(15 psid drop)
54.9 GPM
[12.5 m3/hr]
47.4 GPM
[10.8 m3/hr]
62.3 GPM
[14.2 m3/hr]
62.6 GPM
[14.2 m3/hr]
Peak
(25 psid drop)
70.9 GPM
[16.1 m3/hr]
61.2 GPM
[13.9 m3/hr]
80.4 GPM
[18.3 m3/hr]
80.7 GPM
[18.3 m3/hr]
Cv
(Flow at 1 psi drop) 14.2 12.2 16.1 16.2
FLECK® 125 IN-AND-OUT VALVE
Installation Instructions
B
A
B
1
3
4
4
3
2
1
2
TITLE
SIZE
SCALE
SHEET 1 OF 1
DWG NO.
REV
Pentair Residential
Filtration, LLC
CHECKED
APPROVED
APPROVALS
DATE
THIRD ANGLE
PROJECTION
DRAWN
B
1:24
REVISIONS
DATE
APP'D
DESCRIPTION
REV.
PCO
ZONE
A
DO NOT SCALE DRAWING. DIMS. ARE IN INCHES [mm]
INTERPRET DIMS AND TOLERANCES PER ASME Y14.5M -2009
UNLESS OTHERWISE SPECIFIED:
ALL FINISHED MACHINED SURFACES 125 OR BETTER.
TOLERANCES:
ANGLES : 1
1 PLACE .X: .015 [0.38]
2 PLACE .XX: .01 [0.3]
3 PLACE .XXX: .005 [0.13]
BR42887
THIS DOCUMENT IS SOLELY THE PROPERTY OF PENTAIR
RESIDENTIAL FILTRATION, LLC. REPRODUCTION, USE
DISCLOSURE, OR TRANSMISSION OF THIS DOCUMENT OR
DETAILS CONTAINED HEREIN, IN PART OR IN WHOLE, IS
PROHIBITED WITHOUT THE WRITTEN CONSENT OF PENTAIR
RESIDENTIAL FILTRATION, LLC ENGINEERING. THIS
DOCUMENT AND ANY COPIES SHALL BE RETURNED TO
PENTAIR RESIDENTIAL FILTRATION, LLC UPON REQUEST.
COMPONENTS / ASSEMBLIES TO BE COMPLIANT AND COMPATIBLE WITH EUROPEAN UNION DIRECTIVE 2011/65/EEC (RoHS2) & REGULATION (EC)1907/2006 (REACH) REQUIREMENTS
TOP VIEW

4006337 MY22
13845 Bishops Dr. | Suite 200 | Brookeld, WI 53005 | United States
P: 262.238.4400 | Customer Service: 800.279.9404 | [e-mail] | pentair.com
All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered
trademarks and logos are the property of their respective owners.
© 2022 Pentair. All rights reserved.
BYPASS OPERATION
1. Valve is in service when blue handles are turned parallel to inlet and out.
2. Valve is in bypass when both handles are turned clockwise and are perpendicular to inlet and outlet ports.
3.Todepressurizeadownowsystem:
a. Turn blue handle of supply side clockwise to be perpendicular to port.
 b.Openadownstreamwatertap/faucettorelievepressure.
c. Turn blue handle on treated water side clockwise so it is perpendicular to the port.
 d.RemovetheFleck125In-and-OutValvebyslowlyunthreadingthecouplingnuts.
4.Todepressurizeanupowsystem:
 a.Turnoffmainwatersupply.
 b.Openadownstreamwatertaptorelievepressure.
c. Turn both blue handles clockwise so they are perpendicular to the ports.
 d.Turnmainwatersupplybackon.
 e.RemovetheFleck125In-and-OutValvebyslowlyunthreadingthecouplingnuts.
As an option, a relief valve can be installed in either of the two ¼”-18 NPT ports and used to relieve pressure in the Fleck 125 In-and-Out
Valve afterthebypassvalvehasbeenputinthebypassposition.Followtheinstructionsbelow,items7and8,forpreparingthese
ports for use.
DIMENSIONAL DRAWINGS
29.6
1.17
47.8
1.88
69.7
2.74
25.4
1.00
36.8
1.45
55.8
2.20
68.6
2.70
120.7
4.75
133.2
5.24
1/4"-18 NPT FEMALE THREAD
TWO PLACES
TO OPEN, DRILL THROUGH
WITH 5/16" DRILL MAX.
36.8
1.45
47.9
1.89
25.4
1.00
69.7
2.74
68.6
2.70
138.4
5.45
36.8
1.45
55.8
2.20
145.8
5.74
1/4"-18 NPT FEMALE THREAD
TWO PLACES
TO OPEN, DRILL THROUGH
WITH 5/16" DRILL MAX.
62134-01 62134-02
B
A
B
1
3
4
4
3
2
1
2
TITLE
SIZE
SCALE
SHEET 1 OF 1
DWG NO.
REV
Pentair Residential
Filtration, LLC
CHECKED
APPROVED
APPROVALS
DATE
THIRD ANGLE
PROJECTION
DRAWN
LINE DRWG IN OUT HEAD ASSY
C
1:2
PS
5
5
C
D
D
C
REVISIONS
DATE
APP'D
DESCRIPTION
REV.
PCO
ZONE
B
A
DO NOT SCALE DRAWING. DIMS. ARE IN INCHES [mm]
INTERPRET DIMS AND TOLERANCES PER ASME Y14.5M -2009
UNLESS OTHERWISE SPECIFIED:
ALL FINISHED MACHINED SURFACES 125 OR BETTER.
TOLERANCES:
ANGLES : 1
1 PLACE .X: .015 [0.38]
2 PLACE .XX: .01 [0.3]
3 PLACE .XXX: .005 [0.13]
BR42888
09/02/2020
THIS DOCUMENT IS SOLELY THE PROPERTY OF PENTAIR
RESIDENTIAL FILTRATION, LLC. REPRODUCTION, USE
DISCLOSURE, OR TRANSMISSION OF THIS DOCUMENT OR
DETAILS CONTAINED HEREIN, IN PART OR IN WHOLE, IS
PROHIBITED WITHOUT THE WRITTEN CONSENT OF PENTAIR
RESIDENTIAL FILTRATION, LLC ENGINEERING. THIS
DOCUMENT AND ANY COPIES SHALL BE RETURNED TO
PENTAIR RESIDENTIAL FILTRATION, LLC UPON REQUEST.
COMPONENTS / ASSEMBLIES TO BE COMPLIANT AND COMPATIBLE WITH EUROPEAN UNION DIRECTIVE 2011/65/EEC (RoHS2) & REGULATION (EC)1907/2006 (REACH) REQUIREMENTS
62134LNE
1.Theinformation,specicationsandillustrationsinthemanualarebasedonthelatestinformationavailableatthetimeofrelease.
Themanufacturerreservestherighttomakechangesatanytimewithoutnotice.
2.Thisproductshouldbeinstalledbyaplumbingprofessional.
3.Thisunitisdesignedtobeinstalledonpotablewatersystemsonly.
4.CheckallapplicableplumbingandbuildingcodesforinstallationcomplianceItisestablishedthatwhendaytimewaterpressureexceeds80psi(5.5bar),
themaximumpressureratingof125psi(8.6bar)canbeexceeded.Apressureregulatormustbeinstalledonthissystemorwarrantyisvoided.
5.Donotplacetheunitindirectsunlight.Blackunitswillabsorbradiantheat,increasinginternaltemperatures.
6.Donotstrikethevalveoranyofthecomponents.
7.Donotusepetroleum-basedlubricantssuchasVaseline,oils,orhydrocarbon-basedlubricantsonanyo-rings.Useonly100%siliconelubricants.
8.Whenusingtestports:
 -Toopenports,drillthroughwithcleandrillnolargerthan5/16”priortoinstallationofFleck125In-and-OutValveontank.Useacleandrillbitfreeofoil 
anddonotuseanydrillinglubricant.
 -Besuretocleanoutanychipsordebrispriortoinstallation.
 -Donotusemorethan2wrapsofTeontapewheninstallingacomponenttotheseports.Donotusepipedope.
 -Wheninstallingcomponentintothe¼-18NPTports,donotexceed25Lb-intorque.
IMPORTANT! PLEASE READ