Pentair FLECK 3150 NXT User guide

FLECK
3150 NXT
INSTALLER
MANUAL
WATER PURIFICATION

Installer Manual Fleck 3150 - NXT - Table of contents
2 / 122 Ref. MKT-IM-010 / B - 28.05.2018
Table of contents
1. Generalities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1. Scope of the documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
1.2. Release management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3. Manufacturer identifier, product . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.4. Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5. Abbreviations used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.6. Norms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.6.1. Applicable norms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.6.2. Available certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.7. Procedure for technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.8. Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.9. Limitation of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.10. Scan & Service application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1. Safety pictograms definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2. Serial label location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3. Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3.1. Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.3.2. Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4. Hygiene and sanitization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4.1. Sanitary issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4.2. Hygiene measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.1.1. Performance flow rate characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2. Outline drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3. Components description and location . . . . . . . . . . . . . . . . . . . . . . . 17
3.4. System regeneration cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.4.1. DF regeneration cycle (5-cycles operation) . . . . . . . . . . . . . . . . . . . . . . 18
3.4.2. UF regeneration cycle (5-cycles operation) . . . . . . . . . . . . . . . . . . . . . . 20
3.4.3. Filter cycle (3-cycles operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.5. Injector block position for DF and UF configurations . . . . . . . . . . . 23

Installer Manual Fleck 3150 - NXT - Table of contents
Ref. MKT-IM-010 / B - 28.05.2018 3 / 122
4. System sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
4.1. Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1.1. Injector/DLFC/BLFC-Valve configuration . . . . . . . . . . . . . . . . . . . . . . . 24
4.2. Sizing a softener (single unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2.1. Parameters to be considered. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2.2. Determining the required volume of resin . . . . . . . . . . . . . . . . . . . . . . 25
4.2.3. Resin exchange capacity and capacity of the unit . . . . . . . . . . . . . . . . 26
4.2.4. Valve configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.2.5. Cycle time calculation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.3. Salt amount definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.4. 1800 Injector flow rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
5.1. Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.2. Safety notices for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.3. Installation environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.3.1. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.3.2. Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.3.3. Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.3.4. Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.4. Integration constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.5. Valve connection to piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.5.1. Top-mounted valve installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.5.2. Side-mounted valve installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.6. Block diagram and configuration example . . . . . . . . . . . . . . . . . . 40
5.7. System types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.7.1. Single valve (System #4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.7.2. Multiple valves with lockout (System #5) . . . . . . . . . . . . . . . . . . . . . . . 42
5.7.3. Multiple valves with consecutive regenerations (System #6) . . . . . . . 43
5.7.4. Duplex alternating (System #7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.7.5. Multiple valves, alternating (System #9). . . . . . . . . . . . . . . . . . . . . . . . 44
5.7.6. Multiple valves, demand (System #14) . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.8. Valve connection to piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5.9. Electrical connections) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5.9.1. Connections for multiple valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.10. Bypassing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.11. Drain line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.12. Overflow line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.13. Brine line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Installer Manual Fleck 3150 - NXT - Table of contents
4 / 122 Ref. MKT-IM-010 / B - 28.05.2018
6. Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.1. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.1.1. During service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.2. Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
6.3. Setting the time of the day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.4. Basic programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.4.1. Language setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6.4.2. Inlet water hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.4.3. Regeneration days override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.4.4. Regeneration start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.5. Master programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6.5.1. Master programming mode chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6.5.2. Entering master programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6.5.3. Language setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6.5.4. System type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
6.5.5. Valve address in the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
6.5.6. System size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
6.5.7. Regeneration type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
6.5.8. Valve type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.5.9. Regeneration flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.5.10. Remote started regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.5.11. Display format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.5.12. System capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.5.13. Safety coefficient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.5.14. Inlet water hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.5.15. Trip points setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.5.16. Regeneration days override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.5.17. Regeneration start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.5.18. Programming regeneration cycle times. . . . . . . . . . . . . . . . . . . . . . . . . 67
6.5.19. Auxiliary relay / Chemical pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
6.5.20. Flow meter selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
6.5.21. Parameters saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6. Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.1. Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.2. Current flow rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.3. Peak flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.4. Totalizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
6.6.5. Hours between last two regenerations. . . . . . . . . . . . . . . . . . . . . . . . . . 72
6.6.6. Hours since last regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
6.6.7. Volume remaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.8. Valve position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.9. Software version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.7. Resetting the controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6.7.1. Partial reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6.7.2. Hard reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Installer Manual Fleck 3150 - NXT - Table of contents
Ref. MKT-IM-010 / B - 28.05.2018 5 / 122
7. Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
7.1. Water filling, draining and waterproofness inspection . . . . . . . . . 75
7.1.1. Activating a single valve system (System #4) . . . . . . . . . . . . . . . . . . . . 75
7.1.2. Activating a multiple valves system (Systems #5, #6, #7, #9 and 
#14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.2. Sanitization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.2.1. Disinfection of water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.2.2. Sodium or calcium hypochlorite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.2.3. Electro chlorination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
8. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
8.1. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
8.1.1. During service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
8.1.2. During regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
8.1.3. LED status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
8.2. Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.3. Manual regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.3.1. Manual delayed regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.3.2. Immediate regeneration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.4. To advance regeneration cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.5. Operation during a power failure . . . . . . . . . . . . . . . . . . . . . . . . . . 79
9. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
9.1. Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.1.1. Use original spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.1.2. Use original approved lubricants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.1.3. Maintenance instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.2. Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.2.1. First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
9.2.2. Motor replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
9.2.3. Power head, piston and/or seal and spacer kit disassembly/
replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
9.2.4. Injector and BLFC cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
9.2.5. Cams replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
9.2.6. Micro-switches replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
9.2.7. Valve on tank assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
10. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
10.1. Error detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
10.2. Programming error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
10.3. Examples of error displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Installer Manual Fleck 3150 - NXT - Table of contents
6 / 122 Ref. MKT-IM-010 / B - 28.05.2018
11. Spare parts and options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
11.1. Valve parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
11.2. Power head 3150 parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
11.3. Injector parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
11.4. Safety brine valves list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
11.5. Air checks list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
11.6. Distribution systems parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
11.6.1. Thread 4", tank 21" to 36", top mounted valve, slots0.2 mm . . . . . . . 101
11.6.2. Flanged 6", tank 21" to 36", top mounted valve, slots 0.2 mm . . . . . . 102
11.6.3. Threaded 4", tank 21" to 36", side mounted valve, top distribution
system, elbow 63 mm, external glue connection . . . . . . . . . . . . . . . . 103
11.6.4. Threaded 4", tank 21" to 36", side mounted valve, bottom 
distribution system, elbow 63 mm, external glue connection . . . . . . 104
11.6.5. Threaded 4", tank 21" to 36", side mounted valve, top distribution
system, straight 63 mm, external glue connection . . . . . . . . . . . . . . . 105
11.6.6. Threaded 4", tank 21" to 36", side mounted valve, bottom 
distribution system, straight 63 mm, external glue connection . . . . 106
11.6.7. Flanged 6", tank 21" to 36", side mounted valve, top distribution 
system, external flange 65 mm connection . . . . . . . . . . . . . . . . . . . . . 107
11.6.8. Flanged 6", tank 21" to 36", side mounted valve, bottom 
distribution system, external flange 65 mm connection . . . . . . . . . . 108
11.6.9. Flanged 6", tank 42" to 63", side mounted valve, top distribution 
system, external flange 80 mm connection . . . . . . . . . . . . . . . . . . . . . 110
11.6.10. Flanged 6", tank 42" to 63", side mounted valve, bottom 
distribution system, external flange 80 mm connection . . . . . . . . . . 112
11.6.11. Hot water, flanged 6", tank 42" to 63", side mounted valve, top and
bottom distribution system, external flange 80 mm connection, 
slots 0.2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
11.6.12. Hot water, flanged 6", tank 21" to 36", side mounted valve, top and
bottom distribution system, external flange 65 mm connection, 
slots 0.2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
11.7. DLFC parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
11.8. Meters parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
11.9. Kit meter & Meter cables list . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
11.10. Other components list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
12. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Installer Manual Fleck 3150 - NXT - Generalities
Ref. MKT-IM-010 / B - 28.05.2018 7 / 122
1. Generalities
1.1. Scope of the documentation
The documentation provides the necessary information for appropriate use of the product. It informs
the user to ensure efficient execution of the installation, operation or maintenance procedures.
The content of this document is based on the information available at the time of publication. The
original version of the document was written in English.
For safety and environmental protection reasons, the safety instructions given in this documentation
must be strictly followed.
This manual is a reference and will not include every system installation situation. The person
installing this equipment should have:
• training in the Fleck series, NXT controllers and water softener installation;
• knowledge of water conditioning and how to determine proper controller settings;
• basic plumbing skills.
This document is available in other languages on https://www.pentairaquaeurope.com/product-
finder/product-type/control-valves.
1.2. Release management
1.3. Manufacturer identifier, product
Manufacturer: Pentair International LLC
Avenue de Sevelin 18
1004 Lausanne
Switzerland
Product: Fleck 3150 - NXT
1.4. Intended use
The device is intended for industry environment use only and it is purpose-built for water treatment.
Revision Date Authors Description
A09.12.2016 BRY/PBO First edition.
B28.05.2018 BRY/FIM Address change, Bleam information and valve on
tank assembly.

Installer Manual Fleck 3150 - NXT - Generalities
8 / 122 Ref. MKT-IM-010 / B - 28.05.2018
1.5. Abbreviations used
Assy......................................................... Assembly
BLFC ....................................................... Brine Line Flow Controller
BV............................................................ Brine Valve
DF............................................................ Down Flow
DLFC ....................................................... Drain Line Flow Controller
HW........................................................... Hot Water
Inj ............................................................ Injector
QC............................................................ Quick Connect
Regen...................................................... Regeneration
S&S ......................................................... Seals & Spacers
SBV.......................................................... Safety Brine Valve
SM ........................................................... Side mounted
TC ............................................................ Time Clock
TM ........................................................... Top mounted
UF............................................................ Up Flow
1.6. Norms
1.6.1. Applicable norms
Comply with the following guidelines:
• 2006/42/EC: Machinery Directive;
• 2014/35/UE: Low Voltage Directive;
• 2014/30/UE: Electromagnetic compatibility;
• 2011/65/UE: Restriction of use of certain hazardous substances in electrical and electronic
equipment (RoHS);
• UNI EN ISO9001 (certificate no. 95.022 SSG ICS).
Meets the following technical standards:
• EN 55014-1;
• EN 55014-2;
• EN 61000-6-1;
• EN 61000-6-2;
• EN 61000-6-3;
• EN 61000-6-4;
• EN 61010-1.
1.6.2. Available certificates
•CE;
•DM174;
•ACS.
Access to all certifications:

Installer Manual Fleck 3150 - NXT - Generalities
Ref. MKT-IM-010 / B - 28.05.2018 9 / 122
1.7. Procedure for technical support
Procedure to follow for any technical support request:
ACollect the required information for a technical assistance request.
→ Product identification (see 2.2. Serial label location, page 11 and 9.1. Recommendations,
page 80);
→ Description of the device problem.
BPlease refer to the "Troubleshooting" chapter, page 90. If the problem persists contact your
supplier.
1.8. Copyright
© 2018 Pentair International Sàrl All rights reserved.
1.9. Limitation of liability
Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer
warranty that may be invoked by Pentair’s direct customers. Users should contact the vendor of this
product for applicable conditions and in case of a potential warranty claim.
Any warranty provided by Pentair regarding the product will become invalid in case of:
• improper installation, improper programming, improper use, improper operation and/or
maintenance leading to any kind of product damages;
• improper or unauthorized intervention on the controller or components;
• incorrect, improper or wrong connection/assembly of systems or products with this product and
vice versa;
• use of a non-compatible lubricant, grease or chemicals of any type and not listed by the
manufacturer as compatible for the product;
• failure due to wrong configuration and/or sizing.
Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair
products, as well as for process/production processes which are installed and connected around or
even related to the installation. Disturbances, failures, direct or indirect damages that are caused by
such equipment or processes are also excluded from the warranty. Pentair shall not accept any
liability for any loss or damage to profits, revenues, use, production, or contracts, or for any indirect,
special or consequential loss or damage whatsoever. Please refer to the Pentair List Price for more
information about terms and conditions applicable to this product.

Installer Manual Fleck 3150 - NXT - Generalities
10 / 122 Ref. MKT-IM-010 / B - 28.05.2018
1.10. Scan & Service application
Scan & Service mobile application is the ideal support for the maintenance person in his daily
business. A simple scan of an identification (ID) label (1) present on the valve with a smartphone gives
an instantaneously access to all updated information related to the product, such as:
• valve’s and tanks detailed configuration;
•manuals;
• spare parts lists;
• troubleshooting recommendations;
• multi-lingual videos, detailing how to best service a part;
• informations about new products, latest technologies, novelties about the Blue Network
program, etc....
No. Operation
ADownload the application "Scan & Service" from or in a
smartphone (4).
BOpen the application "Scan & Service".
CScan the bleam (3) stuck on the valve (2).
DNavigate to find information.