Pepperl+Fuchs WILSEN.sonic.level User manual

Manual for
WILSEN.sonic.level
WS-UCC*-F406-B1 -B41*
Manual

With regard to the supply of products, the current issue of the following document is applicable: The
General Terms of Delivery for Products and Services of the Electrical ndustry, published by the Central
Association of the Electrical ndustry (Zentralverband Elektrotechnik und Elektroindustrie (ZVE ) e.V.)
in its most recent version as well as the supplementary clause: "Expanded reservation of proprietor-
ship"
Worldwide
Pepperl+Fuchs Group
Lilienthalstr. 200
68307 Mannheim
Germany
Phone: [phone] - 0
E-mail: [e-mail]
North American Headquarters
Pepperl+Fuchs nc.
1600 Enterprise Parkway
Twinsburg, Ohio 44087
USA
Phone: [phone]
E-mail: [e-mail]
Asia Headquarters
Pepperl+Fuchs Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Phone: [phone]
E-mail: [e-mail]
https://www.pepperl-fuchs.com

3
Manual for W LSEN.sonic.level WS-UCC*-F406-B15-B41*
Contents
2021-03
1 Introduction................................................................................................................ 4
1.1 Content of this Document............................................................................. 4
1.2 Target Group, Personnel ............................................................................... 4
1.3 Symbols Used ................................................................................................ 4
1.4 Intended Use ..................................................................................................
1. General Safety Information...........................................................................
1.6 Declaration of Conformity............................................................................. 6
2 System Description ................................................................................................... 7
3 Integration into a LoRa Network .............................................................................. 8
4 Establishing a Connection to the Device .............................................................. 10
Mounting................................................................................................................... 14
.1 Installation Conditions ................................................................................ 14
.2 Mounting Instructions ................................................................................. 14
6 Measurement Data Acquisition and Data Transfer of the WILSEN.sonic.level.. 17
7 Parameterization/Information with the WILSEN app............................................ 18
7.1 Menu Structures ......................................................................................... 18
7.2 App Settings Menu ...................................................................................... 19
7.3 Ultrasonic Sensor Submenu....................................................................... 19
7.4 GPS Configuration Submenu ..................................................................... 2
7. LoRaWAN Configuration Submenu............................................................ 26
7.6 Device Configuration Submenu ................................................................. 28
7.7 Device Information Submenu ..................................................................... 30
8 Servicing................................................................................................................... 33
9 Replacing the Battery.............................................................................................. 34
10 Cleaning.................................................................................................................... 36
11 Repair........................................................................................................................ 37
12 Disposal.................................................................................................................... 38

2021-03
4
Manual for W LSEN.sonic.level WS-UCC*-F406-B15-B41*
ntroduction
1 Introduction
1.1 Content of this Document
This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:
•Product identification
•Delivery, transport, and storage
•Mounting and installation
•Commissioning and operation
•Maintenance and repair
•Troubleshooting
•Dismounting
•Disposal
The documentation comprises the following parts:
•This document
•Datasheet
n addition, the documentation may comprise the following parts, if applicable:
•EU-type examination certificate
•EU declaration of conformity
•Attestation of conformity
•Certificates
•Control drawings
•nstruction manual
•Other documents
1.2 Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-
ing lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation, com-
missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
Note
For full information on the product, refer to the further documentation on the nternet at
www.pepperl-fuchs.com.

Manual for W LSEN.sonic.level WS-UCC*-F406-B15-B41*
ntroduction
2021-03
5
1.3 Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions. t is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop-
erty damage.
Depending on the risk level, the warning messages are displayed in descending order as fol-
lows:
Informative Symbols
Action
This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.
1.4 Intended Use
The W LSEN.sonic.level wireless ultrasonic sensor is used to remotely monitor fill levels in con-
tainers, tanks, and silos. t is part of Pepperl+Fuchs' W LSEN (wireless sensor) oT sensor
product family, which wirelessly transmits data directly to the internet.
The fill level is measured at regular intervals and transmitted to the internet via a radio interface.
The measurement and transmission frequency can be parameterized via a Bluetooth interface
and by using an app for mobile end devices.
The wireless sensor also features a GPS geolocation function. Temperature and battery control
functions are used to monitor the status of the sensor.
Only use recommended original accessories.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Note
This symbol brings important information to your attention.
Note
The device must not be used in explosion-hazardous areas.