Pepperl+Fuchs KT-SRT-FF User manual

Starter Kit for FOUNDATION Fieldbus
H1 Infrastructure
KT-SRT-FF
<Complete hardware for connection of FOUNDATION Fieldbus H1
field devices to the host system of your choice
<Output: 25 ... 28 V/360 mA
<Connection of 6 field devices with individual short-circuit
protection
<High-power trunk for high device count and long cable lengths
Starter Kit for FOUNDATION Fieldbus H1 Infrastructure
®
Function
The starter kit for FOUNDATION Fieldbus H1 includes all hardware components in order to power and connect field devices to a host system. The
starter kit is designed to conveniently build out-of-the-box test environments. The test environment can be supplied by regular 90 … 253 V AC
power.
The fieldbus power supply provides up to 360 mA current load on the bus. A Segment Protector can connect up to 6 field devices to the host with
individual short circuit current limitation. The system can be expanded at any time with extra components from the FieldConnex® system.
Note: The host system, field devices, cables and wiring are not included. The starter kit is limited to 1 per customer and location.
Connection
Host Trunk
90 ... 253 V AC
24 V DC
T
-S+ -S+
-+S -+S
Spur Spur Spur
Spur Spur Spur
-S+
-+S
-S+
I
I
I
I
I
I
Technical Data
General specifications
Design / Mounting Cabinet installation
Connections
Field devices 6 , any FF field device
Supply voltage 90 ... 253 V AC
Fieldbus interface
Number of segments 1
Rated voltage UN25 ... 28 V DC
Rated current IN360 ... 10 mA
Terminating resistor integrated
1
Release date: 2021-01-- 12 Date of
Release date: 2021-01-12 Date of issue: 2021-01-12 Filename: 202383_eng.pdf
Germany: [phone]Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [email protected]
[email protected].com

Technical Data
Fieldbus distribution
Number of outputs 6
Rated output voltage max. 31 V DC
Rated output current max. 43 mA
Short-circuit current max. 58 mA
Terminator external
General information
Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and
instructions have to be observed where applicable. For information see www.pepperl-
fuchs.com.
Assembly
Matching System Components
KLD2-FBPS-1.25.360
KT-SRT-FF
Release date: 2021-01-12 Date of issue: 2021-01-12 Filename: 202383_eng.pdf
2
Germany: [phone]Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [email protected]
[email protected].com

Release date: 2021-01-12 Date of issue: 2021-01-12 Filename: 202383_eng.pdf
KT-SRT-FF
3
Germany: [phone]Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [email protected].com
[email protected].com
Starter Kit for FOUNDATION Fieldbus H1 Infrastructure
Assembly
7
1
10
9
8
6
5
4
3
2
11
Description:
1 Trunk output, pins 1S, 2-, 3+
2 Segment Protector R2-SP-IC
3Terminator
4 Trunk connector, T-connector
5Spurconnectors
6 Bulk power supply connector fieldbus power supply, pins 8+, 9-
7 Connector supply voltage 90 ... 253 V AC, pins 14, 15
8 Output 24 V DC, pins 7+, 8-
9 Power supply KFA6-STR-1.24.500
10 Fieldbus power supply KLD2-FBPS-1.25.360
11 Connector host, pins 4S, 5-, 6+
For details on individual components included in this kit refer to the respective datasheets.