Performance PL 134GG User manual

Housing
Cap(Short)
15 Pcs
Back Panel #1
KLIX CAM INSTRUCTIONSKLIX CAM INSTRUCTIONS
Please follow these instructions for easy assembly.
Thank you for purchasing the Performance Corner Unit.
Please follow these instructions for easy assembly.
Do not tighten any screws or bolts until the unit is completely assembled.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
Do not tighten any screws or bolts until the unit is completely assembled.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
IMPORTANT !!IMPORTANT !!
being scratched.being scratched.
Check that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Check that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Top Panel
A
Cam Lock
17 Pcs
1
1
Side Panel
B C
Klix Cam
17 Pcs
2 3
Housing
Cap(Long)
2 Pcs
4
Back Panel #2
D
Adjustable
Glide
6 Pcs
56
M4 x 65
Allen-Key
1 Pc
Large Corner Desk Unit
PL 134GG
Insert the cam with the arrow
pointing towards the hole in the
edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
PAGE 1 OF 3

Attach the Side Panel (B) to
Back Panel by using Cam Lock
(1) and Klix Cam (2).
Attach the Back Panel (C) to
Back Panel (D) by using Cam
Lock (1) and Klix Cam (2).
2
B
C
1
C
B
D
D
Large Corner Desk Unit
PL 134GG
PAGE 2 OF 3

Turn over the Coner Unit to
place the Adjustable Glide (5) to
the bottom of the unit.
4
B
TOP
3
B
C
Attach the Top Panel (A) to Back
Panel and Side Panel by using
Cam Lock (1) and Klix Cam (2).
CD
A
B
Screw Adjustable Glide(5) into
bottom of the Coner Unit.
5
D
B
Large Corner Desk Unit
PL 134GG
PAGE 3 OF 3