Performance PL 135T User manual

PL 135T + PL35EMODSB PL 235T + PL35EMODSB
1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
+
HARDWARE
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
KLIX CAM INSTRUCTIONS
Center Panel
CBA Top Panel
for PL 135T
Side Panel
Top Panel
for PL 235T
Klix Cam
6 Pcs
Cam Lock
6 Pcs
Housing
Cap (Short)
4 Pcs
Housing
Cap (Long)
2 Pc
Adjustable
Glide
4 Pcs
Screw
#6 x 58"
24 Pcs
6 Hole
L-Bracket
4 Pcs
Cross Nut
M6 x 70mm
4 Sets
1 2 3 4 5 6 7 8
PL35EMODSB
HARDWARE PACK WITH PL35EMODSB
MODEL: PL 135T/235T
ASSEMBLY INSTRUCTIONS

2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
B
Screw Adjustable Glide (5) into
bottom of Side Panel (B).
Attach the body to Top Panel (A) by using Cam Lock
(1) and Klix Cam (2).
3
Attach Housing Cap (3 or 4) to all
Klix Cam(2) by pushing neck
thought center of cam.
4
5
or
3 4
Attach the L-Bracket (6) to Side
Panel (B) and Center Panel (C)
as shown. Tighten Screws (7)
securely.
A
Insert the Hole
Plug (9) to all hole.
2
TOP
9
B
1
C
B
6
7
8
B
C
TOP
B
Attach the two Side Panel
(B) to Center Panel (C) by
using Cross Nut (8).
9
CB
!ATTENTION !
              
                    
                     
I                     
        
ASSEMBLY INSTRUCTIONS
MODEL: PL 135T/235T