Performance PL 101GG User manual

IMPORTANT :
being scratched.
Do not tighten screws/bolts until the unit is completely assembled.
Check to be sure that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
DESK SHELL
KLIX CAM INSTRUCTIONS
Please follow these instructions for easy assembly.
Thank you for purchasing the Performance Desk Shell.
Top Panel
A B
Back Panel Right Side Panel
Left Side Panel
C D
PL 101GG
1
Adjustable
Glide
4 Pcs
2 3 4
Housing
Cap (Long)
6 Pcs
65
6 Hole
L-Bracket
5 Pcs
Screw
#6 x 58"
30 Pcs
Housing
Cap (Short)
7 Pcs
Cam Lock
13 Pcs
Klix Cam
13 Pcs
7
M4 x 65
Allen-Key
1 Pc
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into
Klix Cam. Turn Klix Cam to
lock.
3

Turn Top Panel (A) upside down and insert Cam Lock
pins (1) into top panel and into side panels (C,D).
Insert Klix Cams (2) in Side Panels (C,D) and back
panel (B). Attach Back Panel (B) to side panels (C,D)
and Top Panel (A). Turn Klix Cam to tighten.
Attach those
Back Panel(B)
and left right
Side
Panel(C,D) to
Top Panel as
same as Box 1.
Attach L-Bracket(5) to Top
Panel(A), Back Panel(B) and
Side Panel(C,D) as shown by
tighten Screws(6) securely.
XD
X
A
X6
X
5
B
X
X
C
2
Attach Housing Cap(3) to each
Klix Cam(2) by pushing the
neck thought the center of the
Klix Cam.
D
B
TOP
1
C
PL 101GG
DESK SHELL
Screw Adjustable Glides(4)
into bottom of Side Panel.
43
3
4