PETKIT PURA MAX User manual

USER MANUAL
PETKIT PURA MAX SELF-CLEANING CAT LITTER BOX
V1.0-08/2023
Please read the User Manual carefully before using
the product and keep it properly.

TABLE OF CONTENTS
Product List
Product Description
Product Installation
How to Use
Cleaning and Maintenance
Video Guide
Basic Specifications
A Message to Our Valued Customers
User Safety Guide
3
4
5
8
17
23
24
24
25

PRODUCT LIST
01
-3-
RETURN TO
CONTENTS
Main Unit
*Please ensure that all accessories are present before installation and use.
Power Adapter
Odor Eliminator N50 User Manual Cat Litter Remover
Trash Bag
Accessories
USER MANUAL

-4-
RETURN TO
CONTENTS
*Note: In order to provide the best experience possible, we periodically update our products with various
improvements. The actual product may vary from its illustrations on packaging. For any inconsistencies,
please refer to the actual product.
PRODUCT DESCRIPTION
02
Side Cover
Proximity
Sensor
Magnetic
Side Cover
Cylinder
Litter Sier
Waste
Container
Container Lock
OLED Display
Power Port
OK Button
Menu Button

PRODUCT INSTALLATION
03
-5-
RETURN TO
CONTENTS
3.1 Installing Waste Container
①Open the latch to the right and pull out the waste container; open its lid to take out
accessories.
②Spread the trash bag evenly and press it into the bottom of the waste container, and
close the lid of the container.
*Note: The trash bag need to be fastened by the two sides of the lid (as shown in Fig. 1).
Unlocked
Fig. 1

③Take out the Odor Eliminator N50 and
put it into the groove and press the silicone
lid to firmly closed.
⑤Take out the power adapter, insert it into the power port on the back of the main unit,
and then plug in.
-6-
RETURN TO
CONTENTS
④Re-install the waste container to the
main unit and close the latch.
Locked
OPEN

3.3 Pouring Cat Litter
①Aer plugging in and starting up,
shortly press to switch to
“Maintenance Mode”. Shortly press
to activate the mode.
②Pour in cat litter when the cylinder
opening faces up and stays still, and
shortly press to exit “Maintenance
Mode”.
③ Double click and the device
automatically levels off the cat litter.
-7-
RETURN TO
CONTENTS
维护模式
抚平猫砂
Ensure that the amount of cat litter does
not exceed the MAX line. The length of the
cat litter selected must be shorter than
1.2cm, and the diameter less than 3mm.

HOW TO USE
04
-8-
RETURN TO
CONTENTS
4.1 Operating Main Unit
OLED display
· Long press : Turn on/o
· Short press: Switch functions and the
screen will display the selected function.
· Short press: Execute the selected
function.
立即清理
Begin self-cleaning
立即除臭
Spray deodorization
抚平猫砂
Level the cat litter
in the cylinder (use when
daily adding cat litter)
复位
Reset the cylinder back
to original position
配置网络
Connect to Wi-Fi
(use when binding the
device to the App)
Apply to add
and clean cat litter
维护模式
Button usage
Function Description

增加重量
kg
今日如厕
猫在厕所内
未安装净味器
4.2 Display Indication
-9-
RETURN TO
CONTENTS
Status Indication
Fault Indication
Network
status
Light status
Please check the installation
of odor purifier
Please turn the cylinder
knob on the back of the main
unit to the locked position.
The device will automatically
pause and alert when a cat
approaches or enters the litter
box during operation.
Total cat toileting
times of the day
Real-time weight of
the cat in the litter box
Check detailed fault in the App.
猫在厕所内 设备故障， 请在
启动失败， 请检

-10-
RETURN TO
CONTENTS
4.3 App Binding and Activating
①Download and install the App:
②Add the device
Open the downloaded “PETKIT” App and navigate to the home page; Tap the “+” button
in the top right corner to add the device. Select “PETKIT PURA MAX SELF-CLEANING CAT
LITTER BOX”.
Download “PETKIT” App on the App Store
or Android Store
Available on
Android stores
TM
Download on the
App Store
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.
Device
电量：100%
0h 8h 16h 24h
小佩智能猫牌
进食次数
5
下次出粮时间：19:30
智能双子星喂食
器
0h 8h 16h 24h
9:41
Hello, PETKIT

-11-
RETURN TO
CONTENTS
③Start connection
Tap the Menu button on the device and switch to “Configure network”. Tap the OK button
to initiate connection. The screen will display “Connecting...”, and the App will start
connecting to the device. Please wait until the configuration is successful.
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.

-12-
RETURN TO
CONTENTS
④Read usage guide
To ensure the safety of your pet and the correct usage of this product, please read the
usage guide carefully to use the product properly aer successfully connecting it to the
App for the first time.
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.

-13-
RETURN TO
CONTENTS
4.4 Smart Control via App
①Viewing device status
Click “PETKIT PURA MAX” on the device list on the home page to enter the device’s home
page and take a look at its working status, toileting times of the day as well as remaining
cat litter.
Reminder of
remaining
cat litter
Reminder of the
odor eliminator’s
service life
Reminder of waste
container status
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.

-14-
RETURN TO
CONTENTS
②Basic function description
Smart settings: Safety and cleaning functions can be set.
Odor removal now: Click it to deodorize.
Light: Click it to turn on the light to check the conditions of your fur
baby or the inside of the cylinder.
*PETKIT AIR PURIFIER SMART SPRAY needs to be purchased separately.
Clean now: Click it to clean the litter box aer your fur baby finishes
toileting.
Maintenance mode: Click it to enter the maintenance mode to leave
the cylinder opening facing up and staying still
to clean the device and add cat litter with ease.
Empty cat litter: Click it to empty the remaining cat litter in the
cylinder aer installing the cat litter remover.

4.5 Using Odor Removal Device
Click “Bind Smart Spray” on the home page, or click “SUPER ODOR REMOVAL” in settings
to bind PETKIT AIR PURIFIER SMART SPRAY (optional choice).
-15-
RETURN TO
CONTENTS
①Odor removal: Odor removal is automatically performed aer your fur baby toilets to
keep air fresh.
②Light: Light is turned on via app to check the conditions of your fur baby or the inside of
the cylinder.
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.

4.6 Other Functions’ Description
①Kitten mode:
This mode needs to be turned on if you have kittens or pregnant cats at home. When this
mode is on, the device will not clean itself periodically or automatically. Waste is collected
by clicking “Clean now”.
-16-
RETURN TO
CONTENTS
②Rotation without interruption
When this function is o, the device will stop working if it senses any cat is approaching.
When the opening of the cylinder is facing down, other cats may enter the litter box,
resulting in their secretions leaking into the bottom of the device, which makes it harder
to clean.
*When this function is on, the device will not stop working if it senses any cat is approaching,
which may reduce the possibility of cat entering and its secretions leaking into the bottom
of the device.
Note: To enhance user experience, occasional soware
upgrades may occur so that the app interface may vary.
Please refer to the actual product.

CLEANING AND MAINTENANCE
05
5.1 Emptying Cat Litter
For your cats' health, the cylinder needs regular disassembly to clean.
-17-
Before cleaning, please empty the remaining cat litter in the cylinder.
①Press the fasteners of the cat litter remover into corresponding holes of the litter sier.
Upon hearing “Click”, the installation is done.
②Tap “Empty cat litter” on the home page
of the device to empty remaining cat litter.
③When emptying the remaining litter is
done, pinch A (as shown in the figure) to
pull down the remover.
RETURN TO
CONTENTS
Click!
倾倒猫砂
A

-18-
RETURN TO
CONTENTS
5.2 Disassembling Cylinder
①Li upward to remove the side cover. ②Disassemble lock components
③Li upward to take down the cylinder
*Note: Please be sure to turn o or plug o
the device before removing the cylinder.

-19-
RETURN TO
CONTENTS
5.3 Disassembling Litter Sier
①Open the side cover and grasp the litter
sier (as shown in Fig. 1) .
②Press it inward (as shown in Fig.2) .
Fig. 1 Fig. 2
③Make the sier slightly bent and pull it out when it is o the buckle.
*Note: Please be sure to turn o or plug o
the device before removing the cylinder.

-20-
RETURN TO
CONTENTS
① Wash the cylinder and litter sier, which is suggested to add moderate amounts of
detergent and rinse them thoroughly.
② Use a wet towel to wipe the surface and interior of the main unit, ensuring the sensor
remains clean.
5.4 Cleaning Main Unit
Proximity Sensor
*Note: Aer cleaning, all parts should be reassembled only when they are
completely dry. The main unit should only be wiped clean. It is prohibited to
rinse or immerse it in water or it may be damaged!