5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
You can use the SET+GO function only
when the DURATION is set.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This function
has no effect on the operation of the oven.
You can set the MINUTE MINDER at any
time and also when the appliance is off.
1. Touch . and "00" flash in the dis-
play.
2. Use or to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch or the MINUTE MINDER
starts automatically after five seconds.
4. When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and flash in the display.
5. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END functions
can be used at the same time, if the oven is
to be activated and deactivated automati-
cally later. In this case, first set the DURA-
TION and then the END function (re-
fer to "Setting the DURATION" and "Setting
the END" ).
When the Time delay function is activated,
the display shows a static symbol of the
oven function, with a dot and . The
dot shows which clock function is on in the
Clock / residual heat display.
AUTOMATIC PROGRAMMES
Warning! Refer to the Safety chapters.
There are 20 automatic programmes
and recipes. Use an automatic pro-
gramme or recipe when you do not
have the knowledge or experience on
how to prepare a dish. You can find the
list of the recipes for the automatic pro-
grammes in the "Helpful hints and tips"
chapter.
There are two types of automatic
programmes:
• Automatic recipes
• Automatic programmes with weight input
You can find the recipes for the auto-
matic programmes specified for this
appliance on our website. To find the
proper Recipe Book check the PNC
number on the rating plate on the front
frame of the appliance cavity.
Automatic recipes
Setting an automatic recipe:
1. Activate the appliance.
2. Touch . The display shows the num-
ber of the automatic programme (P1 –
P20).
3. Touch or to choose the auto-
matic recipe.
4. Touch or the automatic recipe acti-
vates automatically after five seconds.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol flashes. The appliance deac-
tivates.
6. Touch a sensor field or open the door
to stop the acoustic signal.
Automatic programmes with
weight input
If you set the weight of the meat, the appli-
ance calculates the roasting time.
1. Activate the appliance.
2. Touch .
3. Touch or to set the weight pro-
gramme (refer to the "Recipe book").
The display shows: the cooking time,
the duration symbol , a default
weight, a unit of measurement (kg, g).
4. Touch or the settings save auto-
matically after five seconds.
5. The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
11