
Copyright © 2020, Fast ČR, a. s. Revision 02/2020
EN - 8
2. INSTALLATION AND PREPARATION FOR USE
WARNING: This appliance must be installed by an authorised service person or qualied technician,
according to the instructions in this guide and in compliance with the current local regulations.
• Incorrectinstallationmaycauseharmanddamage,forwhichthemanufactureracceptsnoresponsibility
and the warranty will not be valid.
• Priortoinstallation,ensurethatthelocaldistributionconditions(electricityvoltageandfrequency)andthe
adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on
the label.
• Thelaws,ordinances,directivesand standards inforcein thecountryof use aretobefollowed(safety
regulations, proper recycling in accordance with the regulations, etc.).
2.1 Installation instructions
General instructions
• Afterremovingthepackagingmaterialfromtheapplianceanditsaccessories,ensurethattheappliance
is not damaged. If you suspect any damage, do not use it and contact an authorised service person or
qualied technician immediately.
• Makesurethattherearenoammableorcombustiblematerialsintheclosevicinity,suchascurtains,oil,
cloth etc. which may catch re.
• Theworktopandfurnituresurroundingtheappliancemustbemadeofmaterialsresistanttotemperatures
above 100°C.
• Theapplianceshould notbe installed directly above a dishwasher,fridge,freezer,washing machine or
clothes dryer.
2.2 Installation of the Oven
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate
dimensions. The dimensions for hob and oven installation are given below.
A (mm) 557 min./max. F (mm) 560/580
B (mm) 550 min. G (mm) 555
C (mm) 595 min. H/I (mm) 600/590
D (mm) 575 min. J/K (mm) 5/10
E (mm) 574