PHILIPS Respironics BiPAP Synchrony User manual

BiPAP Synchrony
Set-up guide
© 2011 Koninklijke Philips Electronics N.V. All rights are reserved.
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue
any product at any time without notice or obligation and will not be liable for any consequences
resulting from the use of this publication.
Broudy AE 1/31/11 MCI 4103823 PN 1081154
Please visit www.philips.com/respironics
Reusable Gray
Foam Filter
(required)
Disposable Ultra-fine
Filter (optional)
Filter Cap
Jumper
Cord
Power Supply
AC Extention Cable
Power cord
Breathing
Circuit Connection
Circuit
Tubing
Patient Interface
Bacteria
Filter (Optional)
Integrated Leak
Philips Healthcare is part of
Royal Philips Electronics
How to reach us
www.philips.com/healthcare
[e-mail]
Asia
[phone]
Europe, Middle East, Africa
[phone]
Latin America
[phone]
North America
[phone]
800 285 5585 (toll free, US only)
Philips Respironics
1010 Murry Ridge Lane
Murrysville, PA 15668
Customer Service
[phone]
800 345 6443 (toll free, US only)
Philips Respironics International
Headquarters
[phone]
Philips Respironics Asia Pacific
[phone]
Philips Respironics Australia
[phone]
Philips Respironics China
[phone]
Philips Respironics Deutschland
[phone]
Philips Respironics France
[phone]
Philips Respironics Italy
[phone]
Philips Respironics Sweden
[phone]
Philips Respironics Switzerland
[phone]
Philips Respironics United
Kingdom
[phone]
www.philips.com/respironics
Respironics, Synchrony, BiPAP, Bi-Flex,AVAPS are trademarks of Respironics, Inc. and its affiliates

Setting ventilation
> If appears on the screen, the machine is unlocked;
go directly to frames and .
Icons
Press
on/off
button
Alarm
Reset
Button
Press
to navigate
through the
monitoring
screens
Press &
to change the setting
Press & to
navigate through the
different setting screens
(modes, IPAP, EPAP, etc)
Press
to go back
to the main
screen
1. To reach the mode screen, press .
2. To change the ventilation mode, press or .
3. To reach AVAPS screen, press .
4. To set AVAPS feature, press or .
5. To reach IPAP screen, press .
6. To change IPAP setting, press or .
7. To reach the EPAP screen, then the breath rate, the
inspiratory time... etc, repeat this key combination.
> To come back to the main screen at any time: Press
> To start ventilation: Press on/off button
Some definitions
> To unlock the machine,
1) Hold and together for more than 2 seconds.
2) To keep the machine unlocked, press several times to reach the unlock screen, “ ” and
“0” flash on the screen:
and set to 1 by pressing .
IPAP Inspiratory pressure
EPAP PEEP = Positive End Expiratory
Pressure
PS Pressure support = IPAP – EPAP
Ti Inspiratory time
CPAP Continuous pressure mode
S Spontaneous mode
S/T Spontaneous mode with back
up rate
T Pressure control mode
Leak Monitoring leak
PC Spontaneous mode with back
up rate and fixed inspiratory
time at each breath
AVAPS Average Volume Assured
Pressure Support function
RR Respiratory rate
BPM Breath per minute
Vte Exhaled tidal volume estimation
MinVentExhaled minute ventilation
estimation
S/T mode Pressure
IPAP
S
PS
60 sec. /BPM t
ST
EPAP
Ti
Patient Ti
Machine Ti
Patient
Alarm on
Patient apnea alarm
Patient disconnection alarm
Rise time
Inspiratory time
Humidifier on
Machine unlocked
Bi-Flex parameter
SmartCard
Pressure Ramp
Backlight
Patient time meter
Maximum IPAP setting
Minimum IPAP setting