Philips DUS804CS-UP User manual

ULTRASONIC
www.lighting.philips.com/dynalite
Multifunction Sensor
Installation Instructions
Instructions d’installation
Installationsanweisungen
Instrucciones de instalación
Istruzioni per l’installazione
Installatie-instructies
インストー ル 手 順
安装指示
58 mm (2.3 in)
10 mm (0.4 in)
32 mm (1.3 in)
90 mm (3.5 in)
80 mm (3.2 in)
Devices must be installed by a
qualied electrician in accordance with
all national and local electrical and
construction codes and regulations.
Les appareils doivent être installés par un
électricien diplômé conformément à tous les
codes et réglementations électriques et de
construction nationaux et locaux.
Die Geräte sind von einem qualizierten Elektriker
in Übereinstimmung mit allen geltenden
Vorschriften zu installieren.
Los dispositivos deben ser instalados por un
electricista calicado y cumpliendo todas las
normas y regulaciones, tanto nacionales como
locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un
elettricista qualicato in conformità con le norme
locali e nazionali vigenti in materia di costruzioni
edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht
door een gekwaliceerde elektricien en in
overeenstemming met alle nationale en
plaatselijke elektriciteits- en bouwvoorschriften.
装置を取り付ける際は、資格のある電気技師に依頼し、
国および地域の電気および建設に関するすべての法令に
従 ってくだ さい 。
根据国家/地区及当地的电气与建筑规范和法规，该设
备必须由有资质的电工进行安装。
.
50° C (122° F)
-5° C (23° F)
≤
90%
1
IEC Pollution Degree II
ULTRASONIC
2.1 - 4.0 m (6.9 - 13.1 ft)
16 m (52.5 ft)*
8 m (26.2 ft)*
4 m (13.1 ft)*
12 m (39.3 ft)*
> 2 m (6.5 ft)
25˚ C (77˚ F)*
2.4 m (7.9 ft)*
DUS804CS-UP
2

Philips Dynalite
www.lighting.philips.com/dynalite
© 2017 Philips Lighting. All rights reserved.
60°
5
9 10
6
PE IR
DyNet RS-485
30 mm (1.2 in)
51 mm
(2.0 in)
3 - 25 mm
(0.12 - 0.98 in)
64 mm (2.5 in)
DyNet RS-485
SHLD
GND
≤ 20 mm (0.8 in)
D+
D-
+12 V
≤ 2 A
12 V 80 mA
30 mm (1.2 in)
51 mm
(2.0 in)
3 - 25 mm
(0.12 - 0.98 in)
64 mm (2.5 in)
DyNet RS-485 SHLD
GND
≤ 20 mm (0.8 in)
D+
D-
+12 V
≤ 2 A
12 V 80 mA
30 mm (1.2 in)
51 mm
(2.0 in)
3 - 25 mm
(0.12 - 0.98 in)
64 mm (2.5 in)
DyNet RS-485 SHLD
GND
≤ 20 mm (0.8 in)
D+
D-
+12 V
≤ 2 A
12 V 80 mA
7 8A 8B
Installation of a home and building automation and control system shall comply with HD 60364-4-41. The temperature limits and current-carrying capacities for
the communication wires specied in HD 384.5.523 shall not be exceeded.
Do not connect inputs to mains.
IEC Overvoltage Category III
2.1 - 4.0 m (6.9 - 13.1 ft)
7.6 m (24.9 ft)*
2.4 m (7.9 ft)*
5.4 m (17.7 ft)*
> 2 m (6.5 ft)
25˚ C (77˚ F)*
120°
IEC Pollution Degree II
PIRPIR
3A 3B 4