Philips G5 solution User manual

G5 Solution
Wearable biosensor
Instructions
for use
989803199491

2
Introduction 3
Intended use 3
Product description 4
General warnings
and precautions 8
Warnings 8
Precautions 9
Use environment 9
Radiofrequency
interference 10
Security and privacy
recommendations 10
Product operation 12
Product setup 12
Preparing skin and
applying biosensor 12
Connecting to the
G5 application 14
Disconnecting the biosensor
and saving patient data 16
Biosensor interface 18
G5 application interface 19
Heart rate transmission
conguration 19
Notications 19
Reviewing data 22
Maintenance 23
Cleaning and disinfection 23
Storage 23
Troubleshooting 24
Specications 26
Symbols 26
Manufacturer’s
information 27
Open source software 27
Regulatory and safety
specications 27
EMC and radio regulatory
compliance 28
FCC compliance statement 29
Safety and
performance tests 30
Biosensor specications 34
Software application
specications 35
Contents

3
Introduction
Intended use
Philips wearable biosensor-G5 solution is a single-location, chest-
worn heart rate monitor. The wearable biosensor-G5 solution includes
a wearable biosensor-G5 and software application. The wearable
biosensor-G5 is a single-use device measuring heart rate by continuously
acquiring surface electrical waveforms related to cardiac excitations
and measuring beat-to-beat intervals when a patient is stationary or
ambulatory. The biosensor functions by capturing and then sending
physiological data wirelessly to the software application. The biosensor’s
frequency of data collection and transmission is congurable.
The software application is a single-patient use device, intended as
an accessory to the biosensor to display and store physiological and
operational data. The software application receives and displays data
from the biosensor providing a user interface and exportable le for
retrospective review and analysis. The application allows conguring the
biosensor frequency of data collection and transmission.
Indications for use
The Philips wearable biosensor-G5 is indicated for single patient use
whenever heart rate measurement is needed in non-critical hospital
settings. The Philips wearable biosensor-G5 solution is used as a higher
resolution heart rate log by nurses or physicians retroactively as an aid
in making non-critical or non-life threatening therapeutic decisions. The
biosensor is intended for patients who are 18 years of age or older.
Note
Before using this product to obtain heart rate, carefully read the instructions
for use and the quick start guide on the G5 biosensor package.

4
Product description
Biosensor
Philips wearable biosensor-G5 solution is a patient heart rate sensing
system – comprised of a Philips wearable biosensor-G5 and a software
application G5 application – which gathers, stores and displays a
patient’s heart rate. The biosensor G5 is designed to connect with the G5
application to let clinicians review and export patient heart rate. Heart
rate measurements are sent to a compatible device using a USB cable for
oine review and analysis.
Philips wearable biosensor-G5 is a wireless, single-use, single-location
chest-worn device that acquires surface electrical waveforms related to
cardiac excitations, and measures beat-to-beat intervals. The biosensor
calculates patient heart rate based upon a combination of patient’s
single-vector ECG and their motion data. The biosensor has two days of
wear life, after which it turns o automatically.
Biosensor top cover
Biosensor label
LED light
ON button
Release liner 1
Release liner 2
Biosensor ID on the back
of the release liner
Electrodes