Philips HF3465 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Wake-up Light
HF3465
10/09
PRODUCT INFORMATION
- Except for the lamp, the appliance does not contain any
serviceable parts.
Safety
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- No specific issues.
ASSEMBLY & DISASSEMBLY ADVICE
- No specific issues.
OPTIONAL (accessories)
- No specific issues.

HF3465
REPAIR INSTRUCTION
Lamp replacement
The lamp has to be replaced when it stops burning or when
the light output decreases. You must replace the lamp with a
Philips Halogen lamp, 100W, 12V, GY6.35.
4222 036 17921 Lamp GY6.35, 100 Watt, 12 Volt
Only this lamp provides the correct light intensity.
Note: This appliance has been designed to be used with self-
shielded lamps only.
1. Unplug the appliance before you replace the lamp.
2. Let the appliance cool down for approx. 15 minutes.
3. Unlock the top cover of the
appliance by pressing it
and turning it anticlock-
wise, until the symbol
on the top cover is aligned
with the symbol on the
lamp housing.
4. Remove the top cover.
5. Remove the old lamp from
the lamp holder.
6. Insert the pins of the new
lamp into the lamp holder.
Do not touch the lamp
with your fingers. Use a
cloth or paper towel when
you place the lamp.
7. Place the top cover back onto the appliance.
8. Lock the top cover by
turning it clockwise until
the symbol on the top
cover and the symbol
on the lamp housing are
aligned.
= changed