Philips SE888 User manual

Quick start guide
SE888/CD680/CD685

Caution
• Use only the supplied batteries and power adapter.
What’s in the box
Handset
Charger Power adapter
Quick start guide
Guarantee
Connect the charger
Power
socket
Power
adapter
Extra handset
charger
Connect each end of the power adapter to:
• the DC input jack at the bottom of the extra handset
charger.
• the power socket on the wall.
NoteChargethebatteriesfor8hoursbeforerstuse.
1Get started

Congure your handset
1 The batteries are pre-installed in the handset. Pull the battery
tape off from the battery door before charging.
2 Whenusingyourphoneforthersttime,youseeawelcome
message (country dependent).
3 Selectyourcountry,thenpress [OK] toconrm.
4 Set the date and time.
• Ifthetimeisin12-hourformat,press*key to select [AM] or
[PM] .

Charge your handset
Charge
8 hours
Place the handset on the charger to charge the handset.When
thehandsetisplacedcorrectlyonthecharger,youhearadocking
sound.
»The handset starts charging.
NoteChargethebatteriesfor8hoursbeforerstuse.
Check the battery level
Whenthehandsetisoffthebasestation/charger,thebars
indicatethebatterylevel(full,mediumandlow).
Whenthehandsetisonthebasestation/charger,thebars
ashuntilchargingcompletes.
Theemptybatteryiconashesandyouhearanalerttone.
The battery is low and needs recharging.

You can register additional handsets to the base station.
The base station can register up to 5 handsets.
Auto registration
1 Place the unregistered handset on the base station.
»The handset detects the base station and start to
register automatically.
»Registration is complete in less than 2 minutes.The
base automatically assigns a handset number to the
handset.
Manual registration
1 Select [Menu] > ,thenpress [OK] .
2 Select [Register] ,thenpress [OK] toconrm.
3 Press and hold on the base station for 5 seconds
untilyouhearaconrmationbeep.
4 Enter the system PIN. Press [Clear] to make
corrections.
5 Press [OK] toconrmthePIN.
»Registration is completed in less than 2 minutes.The
base automatically assigns a handset number to the
handset.
Note
• If the PIN is incorrect or no base is found within a
certainperiod,yourhandsetdisplaysanotication
message. Repeat the above procedure if registration
fails.
• The preset PIN is 0000. No change can be made on it.
2Register the handsets

Need help?
Forfurtherinformation,downloadtheusermanualofyourphoneatwww.philips.com/support
Welcome to Philips
Register your product at www.philips.com/welcome
Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved. QSG_SE888_EN_V1.0
WK11315
0168