Philips HF3463/01 User manual

HF3463

2

3
1

4

HF3463
ENGLISH 6
DANSK 16
DEUTSCH 25
ESPAÑOL 35
SUOMI 45
FRANÇAIS 54
ITALIANO 64
NEDERLANDS 74
NORSK 84
PORTUGUÊS 93
 103
SVENSKA 114
TÜRKÇE 123

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
The Philips Wake-up Light helps you wake up more pleasantly.The light intensity of the lamp
gradually increases to the set level in the 30 minutes before the set wake-up time.The light increases
the production of energy hormones and prepares your body for waking up in a very natural way. It
also makes you feel more energetic.To make waking up an even more pleasant experience, you can
use natural wake-up sounds or the FM radio.The appliance can also be used as a reading lamp.
Light and the biological clock
Exposure to light regulates the biological clock that controls the body’s sleep-wake rhythm.The level
of the hormone melatonin rises in the evening, preparing our body for sleep.The light in the
morning stimulates the production of the hormone cortisol, which makes us awake and alert.
Optimally, the sleep-wake rhythm is in sync with the rhythm of our daily life.This is often not the
case in modern life, as we often have to wake up when it is still dark.
The effects of theWake-up Light
The Philips Wake-up Light gently prepares your body for waking up during the last half hour of
sleep. In the early morning hours our eyes are more sensitive to light than when we are awake.
During that period the relatively low light levels of a simulated natural sunrise elevate the cortisol
level shortly after awakening. People who use the Wake-up Light wake up more easily, have a better
overall mood in the morning and feel more energetic. Starting the day with the Wake-Up Light may
have a positive effect on your productivity and concentration. Because the sensitivity to light differs
per person, you can set the light intensity of your Wake-up Light to a level that matches your light
sensitivity for an optimal start of the day.
For more information about the Wake-up Light, see www.philips.com.
General description (Fig. 1)
ABase
BVents
CLamp housing
DTop control panel
1 SNOOZE/SCREEN BRIGHTNESS CONTROL button
2 @& button (light on/off)
3 3button (light and sound on/off)
4 #button (sound off)
E100W lamp
FLamp replacement hatch
GBottom control panel
1 Light adjustment wheel @(turn to set light intensity)
2 ALARM button
3 RADIO button
4 QUICK CHECK button
5 Volume control wheel $(turn to set volume)
HDisplay section
1 %button
2 Time indication
3 (button (to set clock time)
4 *button (to set alarm time)
5 Gentle beep symbol
6 Natural forest sound symbol
7 Radio symbol
ENGLISH

8 ^button
9 Radio frequency indication
10 Light level indication (visible when light level is adjusted)
11 Alarm time indication
12 Sound level indication (visible when sound level is adjusted)
IReset button
Important
Read this user manual carefully before you use the appliance and save it for future reference.
This appliance is double insulated according to Class II (Fig. 2).
Danger
Water and electricity are a dangerous combination. Do not use this appliance in wet
surroundings (e.g. in the bathroom or near a shower or swimming pool).
Do not let water run into the appliance or spill water onto the appliance (Fig. 3).
Warning
Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
The appliance is suitable for mains voltages of 230V and a frequency of 50Hz.
If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
Regularly remove dust from the inside of the appliance with a dry cloth, as accumulated dust
close to a powerful lamp presents a potential re hazard. See chapter ‘Cleaning and
maintenance’ for more details.
This appliance is only intended for indoor use (Fig. 4).
Caution
Do not drop the appliance or expose it to heavy shocks.
Place the appliance on a stable, level and non slippery surface.
Make sure there is at least 15cm free space around it and 40cm above it to prevent
overheating. (Fig. 5)
Do not use the appliance at room temperatures lower than 10°C or higher than 35°C.
Make sure the vents in the base and on top of the appliance remain open during use.
Let the appliance cool down for approx. 15 minutes before you clean or store it.
Never use the appliance when the lamp housing is damaged, broken or missing.
Consult your doctor before you start using the appliance if you have suffered from or are
suffering from a serious depression.
Do not use this appliance as a means to reduce your hours of sleep.The purpose of this
appliance is to help you wake up more easily. It does not diminish your need for sleep.
Always replace the lamp with a Philips 100W E27 SOFTONE softwhite 230V T55 lamp. Do not
use an energy saving lamp or an electronic energy saving lamp.
The appliance has no on/off switch.To disconnect the appliance from the mains, remove the
plug from the wall socket.
This appliance is only intended for household use, including similar use like in hotels.
General
The appliance has been tted with an automatic protection against overheating. If the appliance
is insufciently cooled (e.g. because the vents are covered), the appliance switches off
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7

automatically. Remove the cause of overheating, unplug the appliance and let it cool down for
approx. 20 minutes.Then switch the appliance back on by plugging it in again.
This appliance allows you to choose the light intensity level you want to wake up to (see section
‘Setting the light intensity level’ in chapter ‘Using the appliance’).
If you often wake up too early or with a headache, reduce the light level.
If you share a bedroom with someone else, this person may unintentionally wake up from the
light of the appliance, even though this person is further removed from the appliance.This
phenomenon is the result of differences in light sensitivity between people.
If you start having trouble waking up again, this is possibly due to a decrease in the lamp’s light
output that occurs after some time. In that case, you can increase the light level or replace the
lamp.
If the appliance is used in an industrial area and/or near a power station, it may occur that, under
certain circumstances, the lamp goes off after it has come on.This does not have an adverse or
harmful effect on the safe functioning of the appliance the next time it is used.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Preparing for use
Screwthelampintotheappliancebeforeyouusetheapplianceforthersttime.
Installation
1 Beforerstuse,openthehatchinthebackoftheappliance(seechapter‘Replacement’)and
screwthelampintothelampholder.
Note: You nd the lamp in a cardboard box inside the appliance.
2 Placetheapplianceat40-50cmfromyourhead,forexampleonabedsidetable(Fig.6).
3 Putthepluginthewallsocket.
Thetimeonthedisplaystartsashingandarrowsappearaboveandbelowthetimeto
indicatethattheclocktimehastobeset(Fig.7).
Note: If the display does not light up after you have plugged in the appliance, press the reset button on
the bottom of the appliance.
Setting the clock time
1 Use the ^andthe%buttonstosetthetime.
2 Holdthebuttondownlongertoputthetimeforwardorbackwardmorequickly.
Note: After you have set the time for the rst time, you have to press the ‘set time’ button before you can
adjust the time again. The time on the display starts ashing and arrows appear above and below the
time to indicate that the clock time can be set.
3 Whenyouhavesetthecorrecttime,pressthe‘settime’buttontoconrmthetime(Fig.8).
Thetimeonthedisplaystopsashingandthearrowsdisappear.
Note: If you do not conrm the time, the ashing stops and the arrows disappear after 10 seconds. This
indicates that the time has been set.
The appliance is now ready for use.
-
-
-
-
-
,
,
ENGLISH8

Using the appliance
Setting the alarm
When you set the alarm, you choose the light intensity level, the type of sound and the sound level.
The alarm is set when the light ring round the ALARM button is on.The light intensity slowly
increases to the chosen level during the last 30 minutes before the set alarm time.The sound slowly
increases in 90 seconds to the chosen level after the set alarm time.
Setting the alarm time
1 Pressthealarmtimebutton(*)tosetthealarm.(Fig.9)
Thealarmtimestartsashingandtwoarrowsappearaboveandbelowthealarm
time(Fig.10).
2 Use the %andthe^buttonstosetthealarmtime,i.e.thetimeatwhichyouwishtoget
up.(Fig.11)
3 Pressthebuttonlongertoputthetimeforwardorbackwardmorequickly.
4 Pressthealarmtimebutton(*)againtoconrmthealarmtime.(Fig.9)
Thearrowsdisappearandthealarmtimestopsashing.
Note: If you do not conrm the alarm time, the ashing stops after 10 seconds. This means that the
alarm time has been set.
Setting the sound and the sound level
1 PresstheALARMbutton(Fig.12).
ThelightringroundtheALARMbuttongoeson(Fig.13).
Therstsoundsymbol(radio)ashesfor3secondsandthesoundcanbeheard.
2 PresstheALARMbuttonagainifyouwanttoselectanotherwake-upsound.Whenyouhave
foundthesoundyouwanttouse,donotpresstheALARMbuttonagain(Fig.12).
After3seconds,thesymbolofthesoundselectedstopsashingtoindicatethatithasbeen
selected.
Thealarmhasbeensetandcontinuestoworkuntilyouswitchoffthealarmfunction.When
youdothis,thesoundsymboldisappearsfromthedisplayandthelightringroundthe
ALARMbuttongoesout.Seealsosection‘Switchingthealarmonoroff’.
3 Turnthevolumecontrolwheel$tosetthesoundlevel.(Fig.14)
The $appearsonthedisplay.(Fig.15)
4 Ifyouwantnosoundatwake-uptime,selectlevel0.
Setting the light intensity level
1 Usethelightadjustmentwheel@tosetthelightintensitylevel.(Fig.16)
The @appearsonthedisplay.
Tip: When you use the appliance for the rst time, set the light intensity to 20. The moment you wake up,
check which light intensity level the appliance has reached by slightly turning the light adjustment wheel
@. When you do this, the current alarm light intensity level appears on the display. Set the alarm light
intensity to this level for the next day.
2 Ifyoudonotwantthelighttogoonatwake-uptime,selectlightintensitylevel0.
Quick alarm check
1 PresstheQUICKCHECKbuttontostartanacceleratedwake-upalarmtest(Fig.17).
ThelightringroundtheQUICKCHECKbuttongoeson(Fig.18).
,
,
,
,
,
,
,
,
,
ENGLISH 9

Duringtherst50secondsofthetest,youseearapidincreaseofthelightintensitytothe
selectedlevel.Duringthelast40seconds,youheartheselectedsoundgraduallyincreaseto
theselectedlevel.
2 PresstheQUICKCHECKbuttonagaintostopthetest(Fig.17).
ThelightringroundtheQUICKCHECKbuttongoesout.
Note: The appliance continues to run the accelerated wake-up alarm test until you press the QUICK
CHECK button again.
Switching the alarm on or off
The light ring round the ALARM button is on when the alarm is on. At the set time, the wake-up
sound is played and the lamp has reached the selected light intensity level.
1 Press the 3buttontoswitchoffthelightandthewake-upsound.(Fig.19)
ThelightringroundtheALARMbuttoncontinuestoburn.Thealarmfunctionisstillactive
andthewake-upalarmwillgooffatthesettimeandwiththesetsoundandlightintensity
thenextday(Fig.13).
2 Press the #buttonifyouwanttoswitchoffthesoundwhenthealarmgoesoff.(Fig.20)
3 Press the @&buttonifyouwanttoswitchoffthelampwhenthealarmgoesoff.(Fig.21)
4 Ifyouwanttoswitchoffthealarmfunctionaltogether,presstheALARMbuttononeor
moretimesuntilthereisnosoundsymbolonthedisplayandthelightringroundthe
ALARMbuttongoesout.
Snoozing
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoswitchoffthesoundfor9
minuteswhenthealarmhasgoneoff(Fig.22).
The lamp continues to burn at the selected intensity level.After 9 minutes, the wake-up sound is
automatically played again.
2 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttonlongertodimthelight.
Note: You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS
CONTROL button again.
Note: You can only use the snooze function within 15 minutes after the alarm starts to go off. After those
15 minutes, the button no longer functions as SNOOZE button and only functions as
SCREEN BRIGHTNESS CONTROL button.
Adjusting the light intensity during the wake-up phase
1 Turnthelightadjustmentwheel@toselectahigherorlowerlightintensity.(Fig.16)
The lamp burns at the selected intensity during the rest of the wake-up phase.
Adjusting the brightness of the display
1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoadjustthebrightnessof
thedisplay(Fig.22).
Press the button again to set the brightness to another level.There are three levels.
Note: This button cannot be used to adjust the display brightness when the alarm goes off and during
snoozing.
3button
1 Whenthealarmgoesoffatthesetwake-uptime,pressthe3button to switch off the
wake-upalarmlightandsound.
,
,
,
ENGLISH10

Note: The alarm function remains active and the light ring round the alarm button continues to burn.
2 Whenyouhaveswitchedonthereadinglampand/ortheradio,pressthe3button to switch
offthereadinglampand/ortheradio.
When you press the 3button again, only the light goes on.
Note: When the alarm function is active, pressing the 3 button does not affect the alarm settings.
Reading lamp
1 Press the @&buttontoswitchthelamponoroff.(Fig.21)
2 Turnthelightadjustmentwheel@upwardsordownwardstoincreaseordecreasethelight
intensitylevel.(Fig.16)
Thelightlevelindicationonthedisplay@showsthelightintensitylevel(00to20).(Fig.23)
Tip: We advise you to set the light intensity to 20 (maximum level) for reading. If this light level is not
strong enough, switch on an extra lamp.
Note: The light intensity level you select is automatically set as the light intensity level for the alarm as
well.
Ifnecessary,donotforgettosetthelightintensitylevelbacktothewake-uplevel!
Radio
1 PresstheRADIObuttontoswitchontheradio(Fig.24).
Thelightringroundthebuttongoeson(Fig.25).
2 Use the %andthe^buttonstoselectthefrequencyofyourfavoritestation.(Fig.26)
You can choose FM stations.
Note: To scan radio frequencies automatically, press and hold the the % or the ^button for approx. 2
seconds.
3 PresstheRADIObuttontoswitchofftheradio(Fig.24).
Power failure
To make sure the alarm goes off at the set time after a short power failure, the appliance has been
provided with a backup system.This system has a self-charging battery that does not have to be
replaced.The system remembers the time for a few minutes.
Afteralongpowerfailure,thedisplayshowsanincorrectclocktimeandthealarmtimeis
00.00.Setthecorrectclocktime(seechapter‘Preparingforuse’)andthecorrectalarmtime
(seechapter‘Usingtheappliance’)(Fig.7).
Reset
1 Iftheappliancedoesnotrespondwell,removetheplugfromthewallsocketandthen
reinsertit.Ifthisdoesnothelp,presstheresetbuttononthebottomoftheapplianceto
resetthedisplaytothefactorydefaultsettings(Fig.27).
Cleaning and maintenance
Alwaysunplugtheapplianceandletitcooldownforapprox.15minutesbeforeyoustart
cleaningit.
Neverusescouringpads,abrasivecleaningagentsoraggressiveliquidssuchaspetroloracetone
tocleantheappliance.
Regularlyremovedustfromtheinsideoftheappliancewithadrycloth,asaccumulateddust
closetoapowerfullamppresentsapotentialrehazard.
,
,
,
ENGLISH 11

1 Cleantheoutsideoftheappliancewithadampcloth.
2 Cleantheinsideoftheappliancewithadrycloth.
Openthelampreplacementhatchbyrstpushingtheribatthebottominwards(1)and
thenupwardswithsomeforce(2)(Fig.28).
Tiltthelampreplacementhatchoutwardsasfarasitgoes(Fig.29).
Donotletwaterrunintotheapplianceorspillwaterontotheappliance(Fig.3).
Replacement
Except for the lamp, the appliance does not contain any serviceable parts.
The lamp has to be replaced when it stops burning or when the light output decreases (also see
chapter ‘Important’). You must replace the lamp with a Philips 100W E27 SOFTONE softwhite 230V
T55 lamp. Only this lamp provides the correct light intensity.
Replacing the lamp
1 Unplugtheappliance.
2 Lettheappliancecooldownforapprox.15minutes.
3 Toopenthelampreplacementhatch,rstpushtheribatthebottominwards(1)andthen
slidethehatchupwardswithsomeforce(2)(Fig.28).
4 Tiltthelampreplacementhatchoutwardsasfarasitgoes(Fig.29).
5 Unscrewtheoldlamp(1)andremoveitfromthelampholder(2)(Fig.30).
6 Screwanewlampinthelampholder.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 31).
Guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Guarantee restrictions
The international guarantee does not cover the lamp.
,
,
,
-
ENGLISH12


Rated voltage 230V
Rated frequency 50Hz
Rated input 100W
Insulation class II
Ingress of water IPX0
Operating conditions Temperature from +10°C to +35°C
Relative humidity from 30% to 90%
Storage conditions Temperature from -20°C to +50°C
Relative humidity from 30% to 90% (no
condensation)
Circuit diagrams, parts lists and other technical descriptions will be provided on request.
Take measures to prevent the occurrence of electromagnetic interference or other types of
interference between this appliance and other appliances.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Solution
The appliance does
not work. Perhaps you have not inserted the plug properly into the wall socket. Put the plug properly into the wall socket.
Perhaps there is a power failure. Check if the power supply works by
connecting another appliance.
Perhaps the mains cord is damaged. If the mains cord is damaged, you
must have it replaced by Philips, a service centre authorised by Philips or
similarly qualied persons in order to avoid a hazard.
Perhaps the appliance overheated and the overheating protection
switched off the appliance. Remove the cause of overheating (e.g. a
towel that blocks one or more vents) and unplug the appliance.Wait
approx. 20 minutes and then put the plug back into the wall socket.
The appliance
becomes hot during
use.
This is normal, as the appliance is heated up by the light of the lamp.
The appliance does
not respond when I
try to set different
functions.
Press the Reset button in the bottom of the appliance or remove the
plug from the wall socket and reinsert it.The appliance is then reset to
the factory default settings.
The light does not go
on when the alarm
goes off.
Perhaps you set the light intensity level too low.Turn the light intensity
wheel @to a higher light intensity level.
ENGLISH 13

Problem Solution
Perhaps you switched off the alarm function by pressing the ALARM
button.
Perhaps the lamp is defective. Replace the lamp (see chapter
‘Replacement’).
The lamp does not
work. Perhaps you did not screw in the lamp before rst use. Screw in the lamp (see chapter ‘Replacement’)
Perhaps you set the light intensity level too low.Turn the light intensity
wheel @to a higher light intensity level.
Perhaps the lamp is defective. Replace the lamp (see chapter
‘Replacement’).
I cannot switch on the
lamp again
immediately after I
switched it off.
You have to wait 3 seconds for the lamp to dim. During this time, the 3
button does not work.
I do not hear a sound
when the alarm goes
off.
Perhaps you set the sound level too low.Turn the volume control wheel
$to a higher sound level.
Perhaps you switched off the alarm function by pressing the ALARM
button.
If you selected the radio as alarm sound, the radio may be defective.
Press the radio button after you switch off the alarm to check if the
radio works. If it does not work, contact the Philips Consumer Care
Centre in your country.
The radio does not
work. Perhaps the external antenna is not properly positioned. Change the position of the external antenna.
The radio produces a
crackling sound. Perhaps the broadcast signal is weak. Search for the correct signal (see chapter ‘Using the appliance’).
The alarm went off
yesterday, but it did
not go off today.
Perhaps you switched off the alarm function by pressing the ALARM
button. Set the alarm for the next day and switch off the wake-up
alarm sound and light the next day by pressing the 3button (see
chapter ‘Using the appliance’).
Perhaps you set the sound and/or light level to a too low setting. Set a
higher sound and/or light level.
Perhaps there has been a power failure that outlasted the capacity of the
backup system.After a long power failure, the display shows an incorrect
clock time and the alarm time is 00.00. Set the correct clock time (see
chapter ‘Preparing for use’) and the correct alarm time (see chapter
‘Using the appliance’).
The light wakes me
too early/too late. Perhaps the light intensity level you have set is not appropriate for you. Try a lower light intensity level if you wake up too early or a higher light
intensity level if you wake up too late. If light intensity level 20 is not high
enough, move the appliance closer to the bed.
ENGLISH14

Problem Solution
Perhaps you woke up too late because the appliance is at a lower level
than your head. Make sure the appliance is located at such a height that
the light is not blocked by your bed, duvet or pillow. Also make sure the
appliance is not placed too far away.
The SNOOZE button
does not function. The snooze function can only be used within 15 minutes after the alarm starts to go off. After those 15 minutes, the button no longer functions
as SNOOZE button and only functions as SCREEN BRIGHTNESS
CONTROL button.
ENGLISH 15

16
Introduktion
Tillykke med dit køb og velkommen til Philips! For at få fuldt udbytte af den støtte, Philips tilbyder,
skal du registrere dit produkt på www.philips.com/welcome.
Med Philips Wake-up Light får du en mere behagelig opvågning. Lampens lysintensitet stiger gradvist
til det indstillede niveau i løbet af 30 minutter før det indstillede vækketidspunkt. Lyset fremmer
produktionen af energihormoner og forbereder din krop på at vågne på en meget naturlig måde.
Det får dig også til at føle dig mere energifyldt. Du kan gøre opvågningen endnu mere behagelig ved
at bruge naturlige vækkelyde eller FM-radio.Apparatet kan også bruges som læselampe.
Lys og det biologiske ur
Lys regulerer det biologiske ur, der kontrollerer kroppens søvn/vågen-rytme. Niveauet af hormonet
melatonin stiger om aftenen og forbereder vores krop på søvn. Lyset om morgenen stimulerer
udskillelsen af hormonet cortisol, der gør os vågne og friske. Det optimale er en søvn/vågen-rytme,
der er synkron med vores dagligdag. Dette er dog ofte ikke tilfældet med moderne livsførelse, hvor
vi ofte er nødt til vågne op, mens det stadig er mørkt.
Virkningerne ved Wake-up Light
Philips Wake-up Light forbereder blidt din krop på at vågne op i løbet af den sidste halve times søvn.
I de tidlige morgentimer er øjnene mere følsomme over for skarpt lys, end når vi er vågne. I den
periode øger det forholdsvist lave lysniveau fra simuleret daggry cortisolniveauet, kort efter du er
vågnet. Personer, der bruger Wake-up Light, vågner nemmere op, er generelt i bedre humør om
morgenen og har mere energi. Når du begynder dagen med Wake-up Light, oplever du muligvis
også en positiv indvirkning på din produktivitet og koncentration. Eftersom lysfølsomheden er
forskellig fra person til person, kan du indstille lysintensiteten på Wake-up Light til et niveau, der
passer til din egen lysfølsomhed, så du får en optimal start på dagen.
Du nder ere oplysninger om Wake-up Light på www.philips.com.

ABasisenhed
BVentilationshuller
CLampekabinet
DØvre kontrolpanel
1 SNOOZE/SCREEN BRIGHTNESS CONTROL-knap
2 @& knap (lys on/off)
3 3knap (lys og lyd on/off)
4 #knap (lyd off)
E100 W pære
FDæksel når pæren skal udskiftes
GNedre kontrolpanel
1 Hjul til lysjustering @(drej på hjulet for at indstille lysstyrken)
2 ALARM knap
3 RADIO-knap
4 QUICK CHECK knap
5 Lydstyrkehjul $(drej på hjulet for at indstille lydstyrken)
HDisplay-sektion
1 %knap
2 Timer indikation
3 (knap (til indstilling af klokkeslæt)
4 *knap (til indstilling af vækketidspunkt)
5 Symbol for behageligt bip-signal
6 Symbol for lyden af skov
7 Radiosymbol
DANSK

8 ^knap
9 Indikator for radiofrekvens
10 Indikator for lysniveau (synlig, når lysniveauet justeres)
11 Indikator for vækketidspunkt
12 Indikator for lydniveau (synlig, når lydniveauet justeres)
IReset-knap (nulstilling)
Vigtigt
Læs denne brugsvejledning omhyggeligt igennem, inden apparatet tages i brug, og gem den til
eventuelt senere brug.
Dette apparat er dobbeltisoleret i henhold til Klasse II (g. 2).
Fare
Vand og elektricitet er en farlig kombination.Anvend aldrig apparatet i våde omgivelser (f.eks. i
badeværelset eller i nærheden af en bruser eller swimmingpool).
Sørg for, at der ikke trænger vand ind i apparatet, og at der ikke spildes vand på det (g. 3).
Advarsel
Kontrollér, om den angivne netspænding på apparatet svarer til den lokale netspænding, før du
slutter strøm til apparatet.
Apparatet kan tilsluttes en netspænding på 230V og en frekvens på 50 Hz.
Hvis netledningen beskadiges, må den kun udskiftes af Philips, et autoriseret Philips-
serviceværksted eller en tilsvarende kvaliceret fagmand for at undgå enhver risiko.
Dette apparat er ikke beregnet til at blive brugt af personer (herunder børn) med nedsatte
fysiske og mentale evner, nedsat følesans eller manglende erfaring og viden, medmindre de er
blevet vejledt eller instrueret i apparatets anvendelse af en person, der er ansvarlig for deres
sikkerhed.
Apparatet bør holdes uden for børns rækkevidde for at sikre, at de ikke kan komme til at lege
med det.
Fjern jævnligt støv fra apparatets inderside med en tør klud, da støvansamlinger tæt på en kraftig
pære kan udgøre en potentiel brandfare. Se afsnittet “Rengøring og vedligeholdelse” for
nærmere oplysninger.
Dette apparat er kun beregnet til indendørs brug (g. 4).
Forsigtig
Tab ikke apparatet, og udsæt det ikke for voldsomme stød.
Anbring apparatet på et stabilt, vandret og skridsikkert underlag.
Sørg for, at der er mindst 40 cm luft over lampen og 15 cm rundt om den for at undgå
overophedning. (g. 5)
Undlad at anvende apparatet, hvis rumtemperaturen er under 10 °C eller højere end 35 °C.
Sørg for, at ventilationshullerne i basisenheden og oven på apparatet ikke er tildækkede under
brug.
Lad apparatet køle af i ca. 15 minutter, før du rengør det eller stiller det væk.
Brug aldrig apparatet, hvis lampekabinettet er beskadiget, gået i stykker eller mangler.
Kontakt din læge, før du begynder at bruge apparatet, hvis du har lidt af eller lider af en alvorlig
depression.
Brug ikke apparatet som et middel til at reducere dit søvnbehov. Formålet med apparatet er at
lette opvågningen. Det reducerer ikke søvnbehovet.
Udskift altid pæren med en Philips 100W E27 SOFTONE softwhite 230 V T55 pære. Brug ikke
energisparepære eller en elektronisk energisparepære.
Apparatet har ingen on/off (tænd/sluk)-kontakt.Træk stikket ud af stikkontakten for at afbryde
forbindelsen til lysnettet.
Dette apparat er kun beregnet til husholdningsbrug, herunder lignende brug f.eks. på hoteller.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DANSK 17

Generelt
Apparatet er forsynet med en automatisk beskyttelse mod overophedning. Hvis apparatet ikke
afkøles tilstrækkeligt (f.eks. hvis ventilationshullerne er tildækkede), vil apparatet slukke
automatisk. Fjern årsagen til overophedningen, træk stikket ud af stikkontakten, og lad apparatet
køle af i ca. 20 minutter.Tænd derefter apparatet igen ved at sætte stikket tilbage i stikkontakten.
Apparatet giver dig mulighed for at vælge, hvilken lysstyrke du ønsker at vågne op til (se afsnittet
“Indstilling af niveau for lysintensitet” i kapitlet “Sådan bruges apparatet”).
Hvis du vågner for tidligt eller med hovedpine, skal du reducere lysniveauet.
Hvis du deler soveværelse med andre, kan vedkommende blive vækket utilsigtet, selvom han/hun
ligger længere væk fra apparatet. Dette fænomen skyldes, at mennesker ikke nødvendigvis har
samme lysfølsomhed.
Hvis du begynder at have problemer med at vågne, kan det skyldes en reduktion i pærens
lysproduktion, hvilket forekommer efter et stykke tid. I dette tilfælde kan du enten øge
lysniveauet eller udskifte pæren.
Hvis apparatet bruges i et industriområde og/eller i nærheden af et el-værk, kan det under
særlige omstændigheder ske, at pæren slukker, efter den er blevet tændt. Dette har ingen
betydning for apparatets sikkerhedsfunktion, næste gang det anvendes.
Elektromagnetiske felter (EMF)
Dette Philips-apparat overholder alle standarder for elektromagnetiske felter (EMF).Ved korrekt
anvendelse i overensstemmelse med instruktionerne i denne brugsvejleding, er apparatet sikkert at
anvende, ifølge den videnskabelige viden, der er tilgængelig i dag.
Klargøring
Skrupærenindilampen,førdutagerapparatetibrugførstegang.
Installation
1 Førproduktetanvendesførstegang,skalduåbnedæksletpåapparatetsbagside(sekapitlet
“Udskiftning”)ogskruepærenifatningen.
Bemærk: Du kan nde pæren i en papæske inden i apparatet.
2 Placérapparatet40-50cmfraditansigt,f.eks.påetnatbord(g.6).
3 Sætstikketistikkontakten.
Klokkeslættetidisplayetbegynderatblinke,ogpileneoverogunderklokkeslættetindikerer,
atdetskalindstilles(g.7).
Bemærk: Hvis displayet ikke lyser, når du har sat stikket i stikkontakten, skal du trykke på reset-knappen
i bunden af apparatet.
Indstilling af klokkeslæt
1 Brugknapperne^og%tilindstillingafklokkeslæt.
2 Holdknappennedeforhurtigerefrem-ellertilbageindstilling.
Bemærk: Når først klokkeslættet har været indstillet første gang, skal du trykke på knappen til indstilling
af tid, før klokkeslættet kan indstilles igen. Klokkeslættet i displayet begynder at blinke, og de to pile over
og under klokkeslættet indikerer, at klokkeslættet kan indstilles.
3 Nårduharindstilletdetrigtigeklokkeslæt,skaldubekræftedetvedattrykkepåknappentil
indstillingaftid(g.8).
Klokkeslættetidisplayetholderopmedatblinke,ogpileneforsvinder.
-
-
-
-
-
-
,
,
DANSK18

Bemærk: Hvis du ikke bekræfter det indstillede klokkeslæt, holder det automatisk op med at blinke, og
pilene forsvinder efter 10 sekunder. Dette betyder at tiden er indstillet.
Apparatet er nu klar til brug.
Sådan bruges apparatet
Indstilling af alarmen
Når alarmen indstilles, skal du vælge lysintensitet, lydtype og lydniveau. Alarmen er indstillet, når den
lysende ring omkring ALARM-knappen er tændt. Lysintensiteten øges langsomt til det valgte niveau i
løbet af de sidste 30 minutter før det indstillede vækketidspunkt. Lyden øges langsomt til det valgte
niveau i løbet af 90 sekunder efter det indstillede vækketidspunkt.
Indstilling af vækketidspunkt
1 Trykpåknappenforalarmtidspunkt(*)tilindstillingafvækketidspunkt.(g.9)
Alarmtidspunktetbegynderatblinke,ogtopilevisesoverogunderalarmtidspunktet(g.10).
2 Brugknapperne%og^tilatindstillealarmtidspunktet,dvs.dettidspunktduønskeratblive
vækket.(g.11)
3 Holdknappennedeforhurtigerefrem-ogtilbageindstilling.
4 Trykpåknappenforalarmtidspunkt(*)igenforatbekræftealarmtidspunktet(g.9)
Pileneforsvinder,ogalarmtidspunktetholderopmedatblinke.
Bemærk: Hvis alarmtidspunktet ikke bekræftes, holder det op med at blinke efter 10 sekunder. Det
betyder, at alarmtidspunktet er indstillet.
Indstilling af vækkelyd og lydniveau
1 TrykpåALARMknappen(g.12).
DenlysenderingomkringknappenALARMtændes(g.13).
Detførstelydsymbol(radio)blinkeritresekunder,oglydenkanhøres.
2 TrykpåALARMknappenigenforvalgafandenvækkelyd.Nårdenønskedelyderfundet,skal
derikketrykkespåALARMknappenigen(g.12).
Efter3sekunder,holdersymboletfordenvalgtelydopmedatblinke,hvilketindikerer,atdet
ervalgt.
Alarmenerindstilletogfortsættermedatværeaktiv,indtilduslukkeralarmfunktionen.Når
dugørdet,forsvinderlydsymboletfradisplayet,ogdenlysenderingomkringknappen
ALARMslukkes.Seogsåafsnittet“Sådantændesogslukkesalarmen”.
3 Drejlydstyrke-hjulet$foratindstillelydniveauet.(g.14)
$visesidisplayet.(g.15)
4 Ønskerduingenvækkelyd,vælgesniveau0.
Indstilling af niveau for lysintensitet
1 Brughjulettillysjustering@foratindstilleniveauetforlysintensitet.(g.16)
@visesidisplayet.
Tip: Når du bruger apparatet for første gang, skal du indstille lysintensitetsniveauet til 20. Det øjeblik, du
vågner op, skal du kontrollere det lysintensitetsniveau, som apparatet har nået, ved at dreje let på
lysjusteringshjulet @. Når du gør dette, vises det aktuelle lysintensitetsniveau for alarmen på displayet.
Indstil alarmens lysintensitetsniveau til dette niveau for næste dag.
2 Hvislysetikkeskalaktiveresvedvækning,vælges0.
,
,
,
,
,
,
,
,
DANSK 19

Hurtig alarm kontrol
1 TrykpåknappenQUICKCHECKforatstarteenhurtigkontrolafvækkealarmen(g.17).
DenlysenderingomkringknappenQUICKCHECKtændes(g.18).
Ideførste50sekunderaftesten,sesenhurtigforøgelseaflysintensitetentildetvalgte
niveau.Idesidste40sekunder,høresdenvalgtelyd,dergradvistøgestildetvalgteniveau.
2 TrykpåQUICKCHECKigenforatstoppetesten(g.17).
DenlysenderingomkringQUICKCHECKslukkes.
Bemærk: Apparatet fortsætter med at køre den accelererede test af vækkealarmen, indtil der igen trykkes
på knappen QUICK CHECK.
Tænd og sluk for alarmen
Den lysende ring omkring ALARM-knappen lyser, når alarmen er tændt. På det indstillede tidspunkt
afspilles vækkelyden, og pæren er nået op på det valgte lysintensitetsniveau.
1 Trykpåknappen3foratslukkelysogvækkelyd.(g.19)
LysetomkringALARMknappenfortsættermedatlyse.Alarmfunktionenerstadigaktiv,og
vækkealarmenvilgåigangnæstedagpådetindstilledetidspunktogmeddenindstilledelyd
oglysintensitet(g.13).
2 Trykpåknappen#,hvislydenskalslukkes,nåralarmengårigang.(g.20)
3 Trykpåknappen@&,hvislysetskalslukkes,nåralarmengårigang.(g.21)
4 Hvishelealarmfunktionenskalslukkes,skaldutrykkepåALARMknappenenellerere
gange,indtillydsymboletidisplayeterforsvundet,ogdenlysenderingomkringALARM
knappenerslukket.
Snooze-funktion
1 TrykpåSNOOZE/SCREENBRIGHTNESSCONTROLknappenforatdeaktiverelydeni9
minutter,efteralarmenergåetigang(g.22).
Pæren fortsætter med at lyse på det valgte lysintensitetsniveau. Efter 9 minutter afspilles
vækkelyden automatisk igen.
2 HoldSNOOZE/SCREENBRIGHTNESSCONTROLknappennedeilidtlængeretidforat
dæmpelyset.
Bemærk: Dette kan kun gøres en gang. Når knappen slippes, vil den igen fungere som SCREEN
BRIGHTNESS CONTROL.
Bemærk: Snooze-funktionen kan kun bruges i 15 minutter, efter alarmen er aktiveret. Efter de 15
minutter fungerer knappen ikke længere som SNOOZE-knap, men kun som SCREEN BRIGHTNESS
CONTROL-knap.
Justering af lysintensiteten i opvågningsfasen
1 Drejpåhjulettillysjustering@foratvælgeenhøjereellerlaverelysintensitet.(g.16)
Pæren lyser ved den valgte intensitet under resten af vækkefasen.
Sådan justeres displayets lysstyrke
1 TrykpåknappenSNOOZE/SCREENBRIGHTNESSCONTROLforatjusterelysstyrkeni
displayet(g.22).
Tryk på knappen igen for at indstille lysstyrken til et andet niveau. Der er tre niveauer.
Bemærk: Denne knap kan ikke bruges til at justere displayets lysstyrke, når alarmen er i gang, og når
snooze-funktionen bruges.
,
,
,
,
DANSK20