Philips HD3137/03 User manual

HD3137
Enregistrez votre produit et obtenez de l’assistance sur le site
www.philips.com/welcome
Des
questions ?
Contactez
Philips
User manual 1 Mode d’emploi 17
Toujours là pour vous aider

English
3
EN
Contents
1 Your multicooker 4
2 What’s in the box 4
3 Overview 4
Controls overview 5
Functions overview 5
4 Using the multicooker 6
Before rst use 6
Preparations before cooking 6
Cooking rice/pasta 7
Making jam 8
Making risotto 8
Boiling 9
Making yogurt 9
Reheating 10
Baking 10
Steaming 11
Stewing/Slow cooking 11
Frying 12
Roasting 12
Manual 12
Keep-warm mode 13
Adjusting the cooking time and temperature 13
Preset time for delayed cooking 14
5 Cleaning and Maintenance 15
Interior 15
Exterior 15
Accessories 15
6 Environment 15
7 Guarantee and service 15
8 Specications 15
9 Troubleshooting 16

4EN
3 Overview
a Detachable
steam vent cap
g Heating element
b Top lid h Power socket
c Inner pot i Cooker handle
d Lid release
button
j Water level
indications
e Control panel k Sealing ring
f Main body
e
f
a
b
c
g
h
i
k
j
d
1 Your multicooker
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that Philips
offers, register your product at
www.philips.com/welcome.
2 What’s in the box
Multicooker main unit
Power cord
2 pcs silicone gloves
Measuring cup
Spatula
Soup ladle
Steam basket
User manual
Recipe
Safety leaet
Warranty card
http://www.philips.com/welcome
User manual
http://www.philips.com/welcome
Recipe
http://www.philips.com/welcome
Safety leaflet
http://www.philips.com/welcome
Warranty

English
5
EN
l Cooking functions q Decrease button
m Keep-warm
button
r Cooking time
button
n Menu button s Temperature
button
o Preset button t Start/Cancel button
p Increase button u Display screen
Controls overview
m
l
n
o r
s
t
u
p q
Functions overview
Functions Default
cooking time
Adjustable
cooking time
Preset time Default cooking
temperature
Rice/pasta
(Riz/pâtes) 40 min /1-24 hr 130-140°C
Jam
(Conture) 10 min 5 min - 2 hr 1-24 hr 90-100°C
Risotto
(Risotto) 35 min /1-24 hr 130-140°C
Boil
(Bouillir) 1 hr 20 min-4 hr 1-24 hr 100°C
Yogurt
( Yaour t) 8 hr 6-12 hr 1-24 hr 40±3°C
Reheat
(Réchauffer) 25 min 5-60 min /85°C
Bake
(Four) 45 min 20 min - 2 hr / 130°C
Steam
(Vapeur) 20 min 5 min - 2 hr 1-24 hr 100°C
Stew
(Mijoter) 1 hr 20 min - 10 hr 1-24 hr 90°C
Fry
(Frire) 15 min 5-60 min /145-150°C
Slow cook
(Slow cook) 5 hr 1-15 hr 1-24 hr 80°C
Roast
(Rissoler) 1 hr / 1-24 hr 130°C
Manual
(Manuel) 2 hr 5 min - 10 hr 1-24 hr 100°C
Note
• The cooking temperature for the baking and manual functions is adjustable. You can select temperature
for the baking function between 40°C to 160°C, and select temperature for the manual function between
30°C to 160°C The step is 10°C.
• After the cooking has started, you can press and hold the start/cancel button (On/Off) to deactivate the
cooking process and the multicooker will enter the standby mode.

6EN
4 Add water to the level indicated on the
scale inside the inner pot and smooth the
rice surface.
Different dishes:
5 Press the lid release button to open the lid.
6 Wipe the outside of the inner pot dry, then
put the inner pot in the multicooker. Check
if the inner pot is in proper contact with
the heating element.
4 Using the multicooker
Beforerstuse
1 Take out all the accessories from the inner
pot. Remove the packaging material of the
inner pot.
2 Clean the parts of the multicooker
thoroughly before using it for the rst time
(see chapter ‘Cleaning and Maintenance’).
Note
• Make sure all parts are completely dry before
you start using the multicooker.
Preparations before cooking
Before using the multicooker, you need to do
the following steps:
Rice:
1 Measure the rice using the measuring cup
provided.
2 Wash the rice thoroughly.
3 Put the pre-washed rice in the inner pot.

English
7
EN
3 Press the start button (On/Off) to start
cooking.
4 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
5 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Note
• If the voltage is unstable at the area you live, it
is possible that the multicooker overows.
• After the cooking is nished, stir the rice and
loosen it immediately to release excessive
moisture for uffy rice.
• Depending on the cooking conditions, the
bottom portion of the rice may become
slightly browned.
7 Close the lid of the multicooker, and put
the plug in the power socket.
Note
• For details about the ratio of rice and water,
see the recipe.
• The level marked inside the inner pot is just
an indication. You can always adjust the water
level for different types of rice and your own
preference.
• Make sure that the outside of the inner pot
is clean and dry, and that there is no foreign
residue on the heating element or the
magnetic switch.
Cooking rice/pasta
1 Follow the steps in “Preparations before
cooking”.
2 Press the menu button (Menu) until the
rice/pasta cooking function (Riz/pâtes) is
selected.

8EN
Making jam
1 Put food and ingredients into the inner pot.
2 Follow steps 6 and 7 in “Preparations
before cooking”.
3 Press the menu button (Menu) until the
jam function (Conture) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
6 The multicooker will be in keep warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Making risotto
1 Put food and ingredients into the inner pot.
2 Follow steps 6 and 7 in “Preparations
before cooking”.
3 Press the menu button (Menu) until the
risotto function (Risotto) is selected.
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
6 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.

English
9
EN
Boiling
1 Put food and ingredients in the inner pot.
2 Follow steps 6 and 7 in “Preparations
before cooking”.
3 Press the menu button (Menu) until the
boiling function (Bouillir) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is nished, you will
hear a few beeps and the selected cooking
function light will be off.
6 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Making yogurt
1 Whisk the ingredients for the yogurt well
and put them in a glass container.
2 Put the glass container in the inner pot.
Make sure that the container is sealed.
3 Pour some water in the inner pot. Make
sure that half of the container is immersed
in water.
4 Follow steps 6 and 7 in “Preparations
before cooking”.
5 Press the menu button (Menu) until the
yogurt function (Yaourt) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
6 Press the start button (On/Off) to start
cooking.
7 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
» The multicooker will enter the standby
mode automatically.

10 EN
» The keep-warm indicator (Chaud) lights
up.
Baking
1 Put food and ingredients in the inner pot.
2 Follow step 6 in “Preparations before
cooking”.
3 Put the plug in the power socket.
Note
• When baking cake, keep the lid closed during
cooking. Baking cake at 130°C and by 45
minutes usually delivers best cooking result.
• It’s recommended to open lid during cooking
when the temperature is above 130°C.
4 Press the menu button (Menu) until the
baking function (Four) is selected.
» To set a different cooking time and
temperature, refer to chapter “Adjusting
the cooking time and temperature”.
5 Press the start button (On/Off) to start
cooking.
6 When the baking is nished, you will hear
4 beeps and the selected function light will
be off.
7 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Note
• When removing the inner pot from the
multicooker, use a kitchen glove or a cloth, as
the inner pot will be very hot.
Reheating
1 Loosen the cooled food and evenly
distribute it in the inner pot.
2 Pour some water onto the food to prevent
it from becoming too dry. The quantity of
the water depends on the amount of food.
3 Follow steps 6 and 7 in “Preparations
before cooking”.
4 Press the menu button (Menu) until the
reheating function (Réchauffer) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
5 Press the start button (On/Off) to start
cooking.
6 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
7 The multicooker will be in keep warm
mode automatically.

English
11
EN
9 The multicooker will be in keep warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
10 Open the lid and carefully take out the
steamed food from the plate or steam
basket.
Note
• The quantity of water depends on the amount
of food in the steam tray. Do not immerse the
steam tray in water.
• Use a kitchen glove or a cloth, as the plate and
steam tray will be very hot..
Stewing/Slow cooking
1 Put food and ingredients in the inner pot.
2 Follow steps 6 and 7 in “Preparations
before cooking”.
3 Press the menu button (Menu) until the
stewing function (Mijoter) or the slow
cooking function (Slow cook) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is nished, you will
hear a few beeps and the selected cooking
function light will be off.
6 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Steaming
1 Pour some water into the inner pot.
2 Put food to be steamed on a plate or in the
steam tray.
3 If you are using a separate plate, put it into
the steam tray.
4 Put the steam tray into the inner pot.
5 Follow steps 6 and 7 in “Preparations
before cooking”.
6 Press the menu button (Menu) until the
steaming function (Vapeur) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
7 Press the start button (On/Off) to start
cooking.
8 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.

12 EN
Roasting
1 Put food and ingredients into the inner pot.
2 Follow step 6 in “Preparations before
cooking”.
3 Put the plug in the power socket.
4 Press the menu button (Menu) until the
roasting function (Rissoler) is selected.
5 Press the start button (On/Off) to start
cooking.
6 There are 2 stages of roasting. For the rst
stage, cooking time is about 35 minutes,
you will hear 5 beeps to remind to turn the
food.
7 Press the menu button (Menu) to continue
the second stage, if it beeps for 5 minutes
without operation, the multicooker will
enter into keep warm mode until end of
the cooking time.
Manual
You may use the manual mode to cook food
with more control over the cooking time and
temperature.
1 Put food and ingredients into the inner pot.
2 Follow steps 6 and 7 in “Preparations
before cooking”.
3 Press the menu button (Menu) until the
manual function (Manuel) is selected.
Frying
1 Put food and ingredients into the inner pot.
2 Follow step 6 in “Preparations before
cooking”.
3 Put the plug in the power socket.
4 Press the menu button (Menu) until the
frying function (Frire) is selected.
» To set a different cooking time, refer to
chapter “Adjusting the cooking time and
temperature”.
5 Press the start button (On/Off) to start
cooking.
6 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
7 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Note
• Do not close the top lid when cooking in the
fry mode.

English
13
EN
Adjusting the cooking time and
temperature
You can adjust the cooking time for all
functions except the rice/pasta , roast, and
risotto functions; and you can adjust the
cooking temperature for baking and manual
functions. Refer to the “Functions overview”
table for the time and temperature regulation
of each function.
After you have selected the desired cooking
function using the menu button, the default
cooking time will be displayed on the screen.
1 To set a different cooking time, press the
cooking time button (Temps de cuisson),
and the default cooking time starts ashing
on the display.
2 Press the increase (+) or the decrease (-)
button to set the hour unit.
3 After the hour unit is set, wait for a few
seconds before the hour unit is conrmed,
and the minute unit starts ashing on the
display.
4 Press the increase (+) or the decrease (-)
button to set the minute unit.
» To set a different cooking time and
temperature, refer to chapter “Adjusting
the cooking time and temperature”.
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is nished, you will hear
4 beeps and the selected cooking function
light will be off.
6 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Note
• If you cook food at a temperature below 70°C,
please turn off the keep-warm mode before
start cooking.
• In manual (Manuel) mode, when cooking at
a temperature higher than 130°C, the top lid
must be opened during cooking.
Keep-warm mode
The multicooker provides you with easy
control over the keep-warm mode.
• After you have selected the cooking
function using the menu button (Menu),
if you press the start button (On/Off)
directly, the keep-warm indicator will
light up. After the cooking is nished, the
multicooker will switch to keep-warm mode
directly.
• After you have selected the cooking
function using the menu button (Menu), if
you press the keep-warm button rst, and
then the start button (On/Off), the keep-
warm indicator will be off. After the cooking
is nished, the multicooker will be in standby
mode.
Note
• In standby mode, you can press the keep-
warm button (Chaud) to enter keep-warm
mode.
• In keep-warm mode, you can press the keep-
warm button (Chaud) to enter standby mode.

14 EN
4 Preset the increase button (+) and the
decrease button (-) to set the desired
preset time.
5 Press the start button (On/Off) to conrm
the preset timer.
6 The cooking will be nished when the
preset time has elapsed. You will hear 4
beeps and the selected cooking function
light will be off.
7 The multicooker will be in keep-warm
mode automatically.
» The keep- warm indicator (Chaud)
lights up.
Note
• The preset function is not available in bake
(Four), fry (Frire), and reheat (Réchauffer)
mode.
• The preset button is not responsive in standby
mode.
5 To set a different cooking temperature,
press the temperature button (Temp) , and
the default temperature starts ashing on
the display.
6 Press the increase (+) or the decrease
(-) button to set the desired cooking
temperature.
Preset time for delayed cooking
You can preset the delayed cooking time for all
cooking modes except the reheating, baking,
and frying modes.
1 Follow steps 6 and 7 in “Preparations
before cooking”.
2 Press the menu button (Menu) until your
preferred cooking function is selected.
3 Press the preset time button
(Départ différé), and the default preset
time starts ashing on the display.

English
15
EN
5 Cleaning and
Maintenance
Note
• Unplug the multicooker before starting to
clean it.
• Wait until the multicooker has cooled down
sufciently before cleaning it.
Interior
Inside of the top lid and the main body:
• Wipe with wrung out and damp cloth.
• Make sure to remove all the food residues
stuck to the multicooker.
Heating element:
• Wipe with wrung out and damp cloth.
• Remove food residues with wrung out and
damp cloth.
Exterior
Surface of the top lid and outside of the main
body:
• Wipe with a cloth damped with soap
water.
• Only use soft and dry cloth to wipe the
control panel.
• Make sure to remove all the food residues
around the control panel.
Accessories
Spatula, soup ladle, inner pot, steam basket,
and steam vent cap:
• Soak in hot water and clean with sponge.
6 Environment
Do not throw away the appliance
with normal household waste at the
end of its life, but hand it in at an
ofcial collection point for recycling.
By doing this, you can help to preserve the
environment.
7 Guarantee and service
If you need service or information, or if you
have a problem, visit the Philips website
at www.philips.com or contact the Philips
Customer Care Center in your country. You
can nd its phone number in the worldwide
guarantee leaet. If there is no Customer
Care Center in your country, go to your local
Philips dealer.
8 Specifications
Model Number HD3137
Rated power output 980W
Rated capacity 5.0L

16 EN
9 Troubleshooting
If you encounter problems when using this multicooker, check the following points before requesting
service. If you cannot solve the problem, contact the Philips Consumer Care Center in your country.
Problem Solution
The light on the button
does not go on.
There is a connection problem. Check if the power cord is connected
to the multicooker properly and if the plug is inserted rmly into the
power outlet.
The light is defective. Take the appliance to your Philips dealer or a
service center authorized by Philips.
The display does not
function.
The multicooker is not connected to the power supply. If there is no
power supply, the power failure backup function does not work and
the display does not function.
The battery for the display runs out of power. Take the appliance to
your Philips dealer or a service center authorized by Philips to have
the battery replaced.
The rice is not cooked. There is not enough water. Add water according to the scale on the
inside of the inner pot.
You did not press the start button (On/Off).
Make sure that there is no foreign residue on the heating element and
the outside of the inner pot before switching the multicooker on.
The heating element is damaged, or the inner pot is deformed. Take
the multicooker to your Philips dealer or a service center authorized
by Philips.
The rice is too dry and not
well cooked.
Add more water to the rice, and cook for a bit longer.
The multicooker does not
switch to the keep-warm
mode automatically.
You might have pressed the keep-warm button (Chaud) before
pressing the start button (On/Off). In this case the multicooker will
be in standby mode after the cooking is nished.
The temperature control is defective. Take the appliance to your
Philips dealer or a service center authorized by Philips.
The rice is scorched. You have not rinse the rice properly. Rinse the rice until the water
runs clear.
Water spills out of the
multicooker during cooking.
Make sure that you add water to the level indicated on the scale inside
the inner pot that corresponds to the number of cups of rice used.
I cannot get to the desired
cooking function.
Press the menu button (Menu) repeatedly to select the desired
function as shown by the indicator.
Rice smells bad after
cooking
Clean the inner pot with some washing detergent and warm water.
After cooking, make sure the steam vent cap, inner lid and inner pot is
cleaned thoroughly.
Error message (E1, E2,
E3, or E4) appears on the
display.
There has been a power failure during cooking. Take the appliance to
your Philips dealer or a service center authorized by Philips.

17
FR
Français
Contenu
1 Votre cuiseur multifonction 18
2 Contenu de l'emballage 18
3 Aperçu 18
Aperçu des commandes 19
Présentation des fonctions 19
4 Utilisation du cuiseur multifonction 20
Avant la première utilisation 20
Préparations avant cuisson 20
Cuisson de riz/pâtes 21
Conture 22
Risotto 22
Faire bouillir 23
Yaourt 23
Réchauffage 24
Cuisson au four 24
Cuisson à la vapeur 25
Faire mijoter/Slow cook 26
Frire 26
Rissoler 27
Manuel 27
Mode de maintien au chaud 28
Réglage du temps de cuisson et de la
température 28
Programmation départ différé 29
5 Nettoyage et entretien 30
Intérieur 30
Extérieur 30
Accessoires 30
6 Environnement 30
7 Garantie et service 30
8 Caractéristiques 30
9 Dépannage 31

18
FR
3 Aperçu
aCapuchon amovible
des évents à vapeur
gRésistance
chauffante
bCouvercle
supérieur
hPrise secteur
cCuve iPoignée du
cuiseur
dBouton de
déverrouillage du
couvercle
jIndications du
niveau d'eau
ePanneau de
commande
kAnneau
d'étanchéité
fCorps de l'appareil
e
f
a
b
c
g
h
i
k
j
d
1 Votre cuiseur
multifonction
Félicitations pour votre achat et bienvenue
dans le monde de Philips !
Pour proter pleinement de l'assistance
offerte par Philips, enregistrez votre produit à
l'adresse suivante : www.philips.com/welcome.
2 Contenu de
l'emballage
Unité principale du cuiseur multifonction
Cordon d'alimentation
Gants en silicone, 2 pièces
Mesure graduée
Spatule
Louche
Panier vapeur
Mode d'emploi
Recette
Livret de sécurité
Carte de garantie
http://www.philips.com/welcome
User manual
http://www.philips.com/welcome
Recipe
http://www.philips.com/welcome
Safety leaflet
http://www.philips.com/welcome
Warranty

19
FR
Français
Aperçu des commandes
m
l
n
o r
s
t
u
p q
lFonctions de
préparation
qBouton de
diminution
mBouton de maintien
au chaud
rBouton de temps
de cuisson
nBouton Menu sThermostat
oBouton de
présélection
tBouton marche/
annulation
pBouton
d'augmentation
uAfcheur
Présentation des fonctions
Fonctions
Temps de
cuisson par
défaut
Temps de
cuisson
réglable
Duréeprédénie Température de
cuisson par défaut
Riz/pâtes 40 min /1-24 h 130-140 °C
Conture 10 min 5 min - 2 h 1-24 h 90-100 °C
Risotto 35 min /1-24 h 130-140 °C
Bouillir 1 h 20 min-4 h 1-24 h 100 °C
Yaour t 8 h 6-12 h 1-24 h 40 ±3 °C
Réchauffer 25 min 5-60 min / 85 °C
Four 45 min 20 min - 2 h / 130 °C
Vapeur 20 min 5 min - 2 h 1-24 h 100 °C
Mijoter 1 h 20 min - 10 h 1-24 h 90 °C
Frire 15 min 5-60 min /145-150 °C
Slow cook 5 h 1-15 h 1-24 h 80 °C
Rissoler 1 h / 1-24 h 130 °C
Manuel 2 h 5 min - 10 h 1-24 h 100 °C
Remarque
• La température de cuisson pour les fonctions Four et Manuel est réglable. Pour la fonction Four, vous
pouvez sélectionner une température comprise entre 40 °C et 160 °C et, pour la fonction Manuel, une
température de 30 °C à 160 °C (par 10 °C).
• Après que la cuisson a démarré, vous pouvez maintenir enfoncé le bouton marche/annulation (On/Off)
pour désactiver le processus de cuisson. Le cuiseur multifonction passe alors en mode veille.

20
FR
4 Ajoutez de l'eau jusqu'au niveau indiqué
dans la cuve et étalez uniformément le riz.
Différents plats:
5 Appuyez sur le bouton de déverrouillage
pour ouvrir le couvercle.
6 Essuyez l'extérieur de la cuve, puis placez
celle-ci dans le cuiseur multifonction.
Vériez si la cuve est directement en
contact avec l'élément chauffant.
4 Utilisation du cuiseur
multifonction
Avant la première utilisation
1 Sortez tous les accessoires de la cuve.
Enlevez le matériau d'emballage de la cuve.
2 Nettoyez soigneusement les éléments du
cuiseur multifonction avant la première
utilisation (voir le chapitre « Nettoyage et
entretien »).
Remarque
• Séchez bien tous les éléments avant d'utiliser
le cuiseur multifonction.
Préparations avant cuisson
Avant d'utiliser le cuiseur multifonction, vous
devez suivre les étapes suivantes :
Riz:
1 Mesurez le riz à l'aide de la mesure graduée
fournie.
2 Lavez le riz à grande eau.
3 Placez le riz lavé dans la cuve.