Philips HMP4000 User manual

www.philips.com/welcome
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
Question?
Contact
Philips
HMP4000

1EN
Contents
1 Trademark notice 3
2 Safety and notice 4
Safety 4
Compliance 5
Copyright 6
Care of the environment 6
Warranty 7
3 Basics 8
Connect 8
Switch on or off 9
Auto standby 10
Screen saver 10
Use the remote control 10
Enter text 11
4 Play 13
Play from a mass storage device 13
Search for media les 14
Select play options 14
Manage les 15
Copy or move les and folders 15
Delete les and folders 16

2EN
Rename les and folders 16
Create music playlists 16
Create photo albums 17
5 Setup 18
System 18
Audio 18
Video 19
6 EasyLink 20
7 UpdatethermwarethroughaUSBstoragedevice 21
8 Troubleshooting 22
9 Specication 23

3EN
1 Trademark notice
The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS
and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Real RMVB logo is a trademark or a registered trademark of RealNetworks, Inc.
®

4EN
2 Safety and notice
Read and understand all instructions before you use this product. If damage is
caused by failure to follow the instructions, the warranty does not apply.
Safety
This 'bolt of lightning' indicates uninsulated material within the device may cause
an electrical shock. For the safety of everyone in your household, please do not
remove the covering.
The 'exclamation mark' calls attention to features for which you should read the
enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of re or electric shock, the device should not be
exposed to rain or moisture and objects lled with liquids, such as vases, should
not be placed on the device.
CAUTION: To prevent electric shock, fully insert the plug. (For regions with
polarized plugs: To prevent electric shock, match wide blade to wide slot.)
• Only use attachments/accessories specied by the manufacturer.
• Use only power supplies listed in the user manual.
• The product shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the product (e.g. liquid lled objects,
lighted candles).
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, re or the like.
• Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.

5EN
ModicationoftheproductcouldresultinhazardousradiationofEMCor
other unsafe operation.
Warning
•Never remove the casing of this product.
•Never lubricate any part of this product.
•Never place this product on other electrical equipment.
•Keep this product away from direct sunlight, naked ames or heat.
•Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the
product from the power.
•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
Compliance
This product complies with the radio interference requirements of the European
Community.
Class II equipment symbol:
CLASS II apparatus with double insulation, and no protective earth provided.
Anychangesormodicationsmadetothisproductthatarenotexpressly
approvedbyPhilipsConsumerLifestylemayvoidtheuser’sauthoritytooperate
the equipment.
Note
•The type plate is located on the bottom of the product.

6EN
Copyright
Specications are subject to change without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves
the right to change products at any time without being obliged to adjust earlier
supplies accordingly.
Careoftheenvironment
Environmentalinformation
All unnecessary packaging has been omitted.We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, and old equipment.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that
the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. Correct disposal of your old product helps to
prevent potential negative consequences for the environment and human health.

7EN
Warranty
• Never attempt to repair the product, this could lead to the risk of injury,
damage to the product and will void your warranty.
• Use the product and accessories only as intended by the manufacturer.The
caution sign printed on the back of the product indicates risk of electric
shock.
• Never remove the cover of the product. Always contact Philips Customer
Support for service or repairs.
• Any operation expressly prohibited in this manual, or any adjustments and
assembly procedures not recommended or authorized in this manual shall
void the warranty.

8EN
3 Basics
Connect
a HDMIconnectorforaudio/videooutput
• Connects to a high-denition TV (HDTV) through an HDMI cable
b Powerconnector
• Connects to power supply through the AC power cord
To connect to a TV through AV cables
• Through AV, use the supplied AV cable to connect HMP4000 to a TV.
• Make sure that the plugs and sockets match in color.
a
b
HDMI IN
HDMI
HDMI
MAINS ~
RLVIDEO
AV

9EN
For high quality audio
• Through OPTICAL, use a ber optical cable to connect HMP4000 to the
OPTICAL or SPDIF input connector on an audio/video system.
Switchonoroff
1 On HMP4000, press on the remote control to switch on.
» The power indicator lights up white.
2 On the TV, switch to the input connector of HMP4000:
• On the remote control of your TV, use the source button to select the
input channel of HMP4000.
OPTICAL
SOURCE
TV
AV
HDMI 1
HDMI 2
HDMI 3
Side HDMI
Side AV

10 EN
3 To switch HMP4000 to standby mode, press again on the remote control.
» The power indicator lights up red.
Auto standby
From the Home screen, go to [Setup] > [System] to switch on [Automatic
Standby]
If there is no button press or media play on HMP4000 for 15 minutes, HMP4000
switches to standby mode automatically.
Screensaver
From the Home screen, go to [Setup] > [System] to switch on [ScreenSaver
Delay].
If there is no button press or media play on HMP4000 for a selected time
duration, the screen saver is activated. To exit the screen saver, press any button on
the remote control.
Use the remote control
SwitchHMP4000onortostandbymode
• Press
Navigatebetweenscreensorthroughoptions
• Return to the Home screen
, , ,
• Navigate through options
OK
• Conrm the option
• Back one level or exit
Viewoptionsmenuformediaplayorlenavigation
• Press OPTIONS
Control the play
• Start, pause, or resume the play

11EN
• Stop the play
/
• Skip to the previous/ next media le
/
• Search backwards or forwards within current le
• Press repeatedly to select a search speed
/
• Rotate a photo
INFO
• Display the information about current le during play
• Press repeatedly to select aspect ratio, or zoom in or out. To pan
through an enlarged photo, press
, , , .
SUBTITLE
• Access subtitle options
RemovetheconnectedUSBdevicesafely
• Press and hold and select the option
Manageles/foldersunderontheconnectedstoragedevices
• Press EDIT
Entertext
With the onscreen keyboard, use the remote control to enter text.
Select input modes
• Press / on the remote control.
» On the onscreen keyboard, current input mode is highlighted.
: English input in the upper case
OK
$%& DEF (#

12 EN
: English input in the lower case
: symbols
Entertext
1 On the remote control, press to move to a key, press OK to
select the letter or symbol.
2 On the onscreen keyboard, select the input options by using the remote
control:
/ : Move the cursor to the left or right.
: Delete the entry before the cursor.
3 When the text entry is complete, select OK on the onscreen keyboard to
exit.

13EN
4 Play
On the HDTV, enjoy media play from a mass storage device, including:
• a USB mass storage device,
• an SD card, or
• an SDHC card.
Playfromamassstoragedevice
1 Connect your mass storage device to HMP4000:
• For a USB mass storage device, connect to on HMP4000.
• Insert an SD/ SDHC card to the SD slot.
» When the USB device is recognized by HMP4000, changes to
on the Home screen.
» When the SD/ SDHC card is recognized by HMP4000, changes
to on the Home screen.
2 On the Home screen, select or .
» Media les are sorted as follows:
[Folder]: Display all the les/ folders.
[Movies]: Display movie les.
HDMI
6HWXS
86%6'&DUG
HDMI
6HWXS
86%6'&DUG

14 EN
[Music]: Display music les.
[Photos]: Display photo les.
3 Select a le to start play.
Searchformediales
• In the list of les or folders, press OPTIONS to select your options:
In [Folder]:
Todisplaylesindifferentviews,
• Select [Thumbnails], [List], or [Preview].
Toshowlesbymediatype,
• Select [All Media],[Movies],[Photos],or [Music].
In [Movies], [Music], and [Photos]:
Tosearchforalebykeyword,
• Select[Search]. Enter the keyword on the onscreen keyboard (see
'Enter text' on page 11).
Tosortlesindifferentways,
• Select [Sort Order].
Togotothefolderview,
• Select [Go to Folder].
Select play options
1 During play, press OPTIONS on the remote control.
2 Press to select an option. Press OK to conrm.
Forvideos,
[Subtitle]: Select a subtitle language
[Audio]: Select an audio language
Folder Movies Music Photos

15EN
[Night Mode]: (for audio encoded in Dolby Digital ): Makes loud sound level softer
and soft sound level louder so that you can enjoy videos at a low volume, without
disturbing others.
[GOTO]: Skip to the specic time, title, or chapter.
[Repeat Title]: Repeat current title.
[Repeat All]: Repeat all the ies.
[Repeat Off]: Switch off the repeat mode.
[Video Setting]: Select display options.
Formusic,
[Repeat Off]: Switch off the repeat mode.
[Repeat One]: Repeat current le.
[Repeat All]: Repeat all the ies.
[ShufeLoop]: Play all the les in random order.
Forphotoslideshow,
[Slide Timing]: Set the time interval before one slide switches to another.
[Slide Transition]: Set the transition mode between two slides.
[Repeat Off]: Switch off the repeat mode.
[Repeat All]: Play photos in current folder repeatedly.
[ShufeLoop]: Play photos in current folder in random order.
[Background Music]: Play a music le during the slideshow.
[Video Setting]: Select display options.
Manageles
On HMP4000, select or on the Home screen. Go to [Folder], and you can
manage les on the connected storage devices.
Copyormovelesandfolders
1 In [Folder], select a le or folder in the list of les/ folders.
Folder Movies Music Photos

16 EN
To select multiple les,
a Ontheremotecontrol,pressEDIT.
» A list of options is displayed.
b Select [Multiple Select].
» A le list is created for you to add les or folders.
c Press / toselectaleorfolder.Press toconrm.
2 On the remote control, press EDIT.
3 On the pop-up list of options, select [Copy] or [Move].
4 Select a folder as the destination. Press to conrm.
» The selected les or folders are copied or moved to the destination.
Deletelesandfolders
1 Follow Step 1-3 under "Copy or move les and folders" (see 'Copy or move
les and folders' on page 15).
2 On the pop-up list of options, select [Delete].
» The selected les or folders are deleted.
Renamelesandfolders
1 In [Folder], select a le or folder in the list of les/ folders.
2 On the remote control, press EDIT.
3 On the pop-up list of options, select [Rename].
4 On the pop-up onscreen keyboard, edit the le/ folder name (see 'Enter
text' on page 11).
Create music playlists
You can create playlists for music les you want to play together.
1 In [Folder], select music les.
a Ontheremotecontrol,pressEDIT.

17EN
» A list of options is displayed.
b Select [Multiple Select].
» A le list is created for you to add les.
c Press / toselectale.Press toconrm.
2 On the remote control, press EDIT.
3 On the pop-up list of options, select [SavePlaylist].
4 Name the playlist as needed.
» A music playlist is created.
Create photo albums
You can create photo albums for picture les.
1 In [Folder], select picture les.
a Ontheremotecontrol,pressEDIT.
» A list of options is displayed.
b Select [Multiple Select].
» A le list is created for you to add les.
c Press / toselectale.Press toconrm.
2 On the remote control, press EDIT.
3 On the pop-up list of options, select [SavePhotoAlbum].
4 Name the photo album as needed.
» A photo album is created.

18 EN
5 Setup
You can change the setup options of HMP4000.
1 On the Home screen, select [Setup].
• If necessary, press on the remote control to go to the Home screen.
» The setup menu is displayed.
2 Press to select an option. Press OK to conrm the option.
• Press to return to the upper-level menu.
System
[Menu Language]: Select the language for onscreen menus.
[Subtitle]: Select the subtitle language for videos.
[ScreenSaverDelay]: Enable the screen saver when HMP4000 is in the idle
mode for a selected time span, for example, in pause or stop mode. To exit
the screen saver mode, press any key.
[Automatic Standby]: Switch HMP4000 to standby mode when there is no
button press or media play on HMP4000 for 15 minutes.
[Request to Resume Play]: Allow you to select whether to resume video
play from the last stop position.
[Reset Factory Defaults]: Restore factory settings.
Audio
[HDMI Audio Mode]: Select audio output for the HDMI connector.
[Optical output]: Select audio output for the OPTICAL connector
[Lip Sync]: Synchronize audio with video play.