Philips PET831/05 User manual

1Switch OFF the set.
2Connect the supplied adaptor to the set
and the AC outlet.
3The RED light comes on.
4The battery pack will be fully charged in
approximately 4 hours.When the RED light
goes off, it means that the battery pack is
fully charged.
TIP Your battery will continue to charge while
the player is in use. However, the RED light
will not appear and it will take approximately 8
hours to fully charge the battery pack.
Charge
1
Quick start guide
Philips Portable DVD Player PET831 wk0745
IMPORTANT Do not load any 8-cm mini
DVD discs into the player.The DVD player
does not play mini DVD discs. If the disc gets
stuck inside the player, press 9 / twice to
eject the disc.Try the following steps if the
disc remains stuck inside the player.
1Power off and then power on the player.
Press 9/to eject the disc.
2If this does not work, hold the player with
the slot facing down, gently shake the
player until the disc comes out.
1Switch ON the set.
2The GREEN light comes on.
3Slide the disc into the slot on the right side
of the player with the label side of the disc
facing the front of the player.
4The set will automatically start to play.
5Use the control keys on the set or the
remote control.
6To eject the disc, press 9 / twice.
2Enjoy
15
6
2
31Connect the set to the TV as shown.
2Select an appropriate input or source on the TV.
You can consult the user’s guide of your TV. (If
your TV does not have Audio and Video inputs,
you will need to purchase a RF modulator. Please
consult your dealer for more information.)
Connect to TV
3
Y
P
B
P R
Green
Blue
Red
TIP For better video quality, please use COMP.
OUT connection as shown below.
PET831_qsg.qxd 2007.11.9 15:58 Page 1